OJEE 2023 Exam - Dates, Registration, Syllabus, Pattern, Eligibility, Admit Card, Result
Stay up-to date with OJEE News
About OJEE 2023
OJEE 2023: Odisha Joint Entrance Examination Board (OJEEB) has released the Special OJEE 2023 application form on June 1, 2023 at the official website. Candidates can fill out the application form of OJEE 2023 till June 8 at ojee.nic.in. The authorities has released the official notification regarding Special OJEE 2023 exam and candidates can check all the important information from the notification.
Candidates are advised to check the OJEE eligibility criteria 2023 before filling out the application form. As failure to comply with the eligibility criteria of OJEE 2023 will lead to disqualification of candidates at any stage of the admission procedure. The minimum qualification required for OJEE 2023 Under Graduate programmes is Class 12 with at least 45% marks (40% for Reserved Category). For Post Graduate, it is Bachelor's degree with a minimum of 50% marks (45% for SC/ ST/ PwD) from any recognized institute/ university. The Special OJEE 2023 exam will be held from June 26 to 30, 2023.
Odisha Joint Entrance Examination (OJEE) is a state level joint entrance exam conducted by OJEEB for various graduate and post graduate programmes offered at government colleges and private colleges of the state. OJEE is held for admission in medical, management, and engineering institutions in Odisha.
Help Desk for OJEE 2023
Odisha Joint Entrance Examination, JEE Cell,
DIST-Khordha. Bhubaneswar - 751 030.
Website: www.ojee.nic.in/ www.odishajee.com
Phone: 0674-2382101, 0674-2382108
OJEE 2023 Highlights
|Full Exam Name||Odisha Joint Entrance Examination|
|Short Exam Name||OJEE|
|Conducting Body||Odisha Joint Entrance Examinations Board|
|Frequency of Conduct||Once a year|
|Exam Level||State Level Exam|
|Mode of Application||Online|
|Application Fee (General)||1000 Rs [Online]|
|Mode of Exam||Offline|
|Mode of Counselling||Online|
|OJEE B.Pharma - Duration||3 Hours +3 More|
OJEE 2023 Important Dates
Upcoming Dates and Events
01 Jun, 2023 - 08 Jun, 2023
Application - Special OJEE | Mode: Online Ongoing
26 Jun, 2023 - 30 Jun, 2023
Exam - Special OJEE | Mode: Online
Past Dates and Events
08 May, 2023 - 12 May, 2023
Exam | Mode: Online
20 Apr, 2023
Admit Card | Mode: Online
01 Apr, 2023 - 02 Apr, 2023
Application Correction | Mode: Online
10 Feb, 2023 - 31 Mar, 2023
Application | Mode: Online
OJEE 2023 Eligibility Criteria
- Candidates should be Indian citizens.
- There is no age restriction to apply for OJEE. However, candidates applying for B.Tech Marine Engineering should not be more than 22 years of age at the time of admission.
- Candidates should have passed Class 12 or equivalent examination from any school in Odisha or outside the State.
- Candidates should have studied Physics, Mathematics and a language as compulsory subjects along with Chemistry or any other subject.
- Must have at least 45% marks in their qualifying examination. Candidates in the reserved category should get 40% marks.
OJEE Eligibility Criteria 2023 for PG
- Students must have completed a degree in any field for at least three years from an accredited university/institution.
- Candidates with a degree in Technology/ Engineering/ Architecture/ Pharmacy should have completed at least 4 to 5 years from an institution recognized by AICTE or UGC.
- Candidates should have obtained at least 50% marks in the qualifying examination.
- 5% relaxation will be given to students belonging to the reserved category.
- There are no age criteria to apply for OJEE MBA 2023 as per the OJEE MBA eligibility criteria
OJEE B.Pharma Eligibility Criteria
• Candidates must have passed or appearing Class 12 from Science stream with Physics and Chemistry as compulsory subjects along with one of the subjects - Mathematics / Biotechnology / Biology / Technical vocational.
• Passed individual subjects and have obtained 45 % (40 % for SC/ST candidates) in aggregate.
• The examination authority has not prescribed any age limit.
OJEE M.Tech Eligibility Criteria
• Applicants must have passed or appearing in Bachelors/Masters degree in B.Tech/M.Sc.
• Qualifying percentage is 50 % (45 % for SC/ST)
• No age limit for OJEE M.Tech programme.
OJEE M.C.A. Eligibility Criteria
• Must have passed or appearing in Bachelors degree in any discipline from university of Odisha or any other university.
• Had mathematics at class 12 or graduation
• Business Mathematics will not be considered
• Obtained at least 50 % (45 % for candidates belonging to SC/ST category)
• Candidates who have passed BCA/B.SC (IT/CS/IST/ITM) with Mathematics as subject then they can appear in the entrance test without the same at Class 12.
• No age limit has been prescribed
Mode of Application : Online
Mode of Payment : Net Banking | Credit Card | Debit Card | Other
Procedure to apply for OJEE MBA 2023
• Applicants have to register for the exam by providing the required details.
• On submission of details, candidates receive a registration number.
• Fill the other details in the application form after registration
• Upload photograph, signature and left thumb impression
• Pay the examination fees
• Check the entries carefully as the examination authority will not entertain any changes after the final submission of the application form.
• Take the printout of the confirmation page after the final submission of the OJEE application form.
Documents to preserve after final submission
• Printout of confirmation page
• Proof of fee payment
Candidates can check their OJEE 2023 application status by entering registration number/application number and password.
|General, OBC, ST, SC||Online||Transgender, Female, Male||₹ 1000|
OJEE 2023 Syllabus
OJEE B.Pharma Syllabus
Measurements and motion
Heat and thermodynamics
Characteristics of materials
Electricity and magnetism
Relativity and nuclear physics
Atoms and molecules
Structure of atoms and molecules
Types of chemical reaction
Metals and metallurgy
Introductory of organic chemistry
Chemistry in the service of mankind
Algebra of sets
Determinants and matrices
Co-ordinate geometry of two dimensions
Coordinate geometry of three dimensions
Sequence and series
Probability and Statistics
Diversity of plant life
Morphology of angiosperms
Taxonomy of flowering plants
Cell - Structure and function
Continuity of life
Recombinant DNA and tissue culture technique
Complexities of plant life
Processes in plants
Common plant diseases
Diversity of animal life
Control and co-ordination
Human endocrine system
Animal reproduction and human development
Biology in human welfare
Modern techniques in diseases diagnosis
OJEE M.Tech Syllabus
Analytical and logical reasoning
Ordinary differential equations
|Solution of first order|
|Second order and higher order differential equations (separable equation, exact differential equation, homogeneous equation with constant coefficient, Euler Cauchy equations, solution by undetermined coefficients and variation of parameters)|
|Matrices, vectors, determinants, and linear system of equations, eigen value problems, symmetric, skew symmetric, orthogonal matrices|
|Complex matrices, hermitian, skew hermitian, and unitary matrices, similarity of matrices|
|Fourier series and expansion of functions of any period, odd and even functions, half range expansion|
|Use of Laplace transform for solving differential equations, convolution, and integral equations|
|Analytic functions, Cauchy-Riemann equations, Laurent’s series, singularities and zeros|
|Interpolation, numerical integration, solution of first order ordinary differential equations|
Probability and Statistics
|Probability distribution (discrete and continuous), sampling distribution, correlation and regression analysis|
|Prokaryotic and eukaryotic cell structure; microbial nutrition, growth; microbial metabolism (aerobic and anaerobic respiration, photosynthesis); nitrogen fixation; chemical basis of mutations and mutagens|
|Microbial genetics (plasmids, transformation, transduction, conjugation); viruses, bacteria|
|Biomolecules and their conformation; weak inter-molecular interactions in biomacro molecules; chemical and functional nature of enzymes; kinetics of single substrate and bi-substrate enzyme catalyzed reactions; bioenergetics|
|Metabolism (glycolysis, TCA and oxidative phosphorylation); membrane transport and pumps; cell cycle and cell growth control|
Molecular biology and genetics
|Molecular structure of genes and chromosomes; DNA replication and control; transcription and its control; translational processes, Mendelian inheritance; linkage, recombination, and chromosome mapping; chromosomal variation|
|Molecular basis of genetic diseases and applications|
|Bioprocess technology for the production of cell biomass and primary/ secondary metabolites, such as baker's yeast, ethanol, citric acid, amino acids, antibiotics; chromatographic and membrane based bioseparation methods|
|Immobilization of enzymes and cells and their application for bioconversion processes|
|Aerobic and anaerobic biological processes for stabilization of solid/ liquid wastes; bioremediation|
|Kinetics of microbial growth, substrate utilization and product formation; simple structured models; sterilization; batch, fed-batch and continuous processes; mass transfer in bio reactors; scale-up concepts; various types of microbial and enzyme reactors|
|Instrumentation in bioreactors|
Plant and animal biotechnology
|Special features and organization of plant cells; totipotency; regeneration of plants; autotrophic and heterotrophic growth; plant growth regulators and elicitors; production of secondary metabolites by plant suspension cultures|
Characteristics of animal cells
|Metabolism, animal cell cultures; kinetics of cell growth and product formation, hybridoma technology; livestock improvement; cloning in animals; genetic engineering in animal cell culture|
|The origin of immunology; inherent immunity; humoral and cell mediated immunity; antigen; B and T cells and macrophages; major histo compatibility complex (MHC); antigen processing and presentation; molecular basis of antibody diversity|
|Polyclonal and monoclonal antibody; complement; antigen-antibody reaction; immune tolerance; hyper sensitivity; autoimmunity|
Recombinant DNA technology
|Restriction and modification enzymes; vectors: Plasmid, bacteriophage and other viral vectors, cosmids, tiplasmid, yeast artificial chromosome; cDNA and genomic DNA library; gene isolation; gene cloning; expression of cloned gene|
|Transposons and gene targeting; DNA labelling; DNA sequencing; polymerase chain reactions; DNA finger printing; southern and northern blotting; in-situ hybridization; RAPD; RFLP; site-directed mutagenesis; gene transfer technologies; gene therapy|
|Major bioinformatics resources, sequence, and structure databases; sequence analysis (biomolecular sequence file formats, scoring matrices, sequence alignment, phylogeny); DNA microarrays, molecular modelling, and simulations|
Process calculations and thermodynamics
|Laws of conservation of mass and energy; recycle, bypass and purge calculations; degree of freedom analysis|
|First and second laws of thermodynamics|
|First law application to close and open systems|
|Second law and entropy|
|Thermodynamic properties of pure substances: Equation of state, properties of mixtures: Partial molar properties, fugacity, excess properties, and activity coefficients; phase equilibrium: Predicting VLE of systems; chemical reaction equilibrium|
Fluid mechanics and mechanical operations
|Fluid statics, Newtonian and non-Newtonian fluids, Bernoulli equation, friction factors, energy balance, dimension analysis, flow through pipeline systems, flow meters, packed and fluidized beds, elementary boundary layer theory|
|Size reduction and size separation, free and hindered settling; centrifuge and cyclones; thickening and classification, filtration, mixing, and agitation; conveying of solids|
|Conduction, convection, and radiation, heat transfer coefficients, steady and unsteady heat conduction, boiling, condensation, and evaporation; types of heat exchangers and evaporators|
|Fick's 1st law, molecular diffusion in fluids, mass transfer coefficients, two film theory, film theory, penetration, and surface renewal theories; momentum, heat, and mass transfer analogies; stage wise and continuous contacting, and stage efficiencies|
|HTU and NTU concepts design, and operation of equipment for distillation, absorption, leaching, liquid-liquid extraction, drying, humidification, dehumidification, and adsorption|
Chemical reaction engineering
|Theories of reaction rates; kinetics of homogeneous reactions, interpretation of kinetic data, single and multiple reactions in ideal reactors, non-ideal reactors; residence time distribution, single parameter model; non-isothermal reactors|
Instrumentation and process control
|Measurement of process variables; sensors, transducers, and their dynamics, transfer functions and dynamic responses of simple systems, process reaction curve, controller modes (P, PI, and PID); control valves|
|Analysis of closed loop systems including stability, frequency response, cascade and feed forward control|
Process equipment design
|Process design and sizing of chemical engineering equipment such as distillation column, heat exchangers and evaporators|
|Inorganic chemical industries; sulphuric acid, NaOH, fertilizers (ammonia, Urea, SSP, and TSP); natural products industries (pulp and paper, sugar, oil and fats); petroleum refining and petrochemicals; polymerization industries|
|Polyethylene, polypropylene, PVC and polyester synthetic fibers|
|Mechanics: Bending moment and shear force in statically determinate beams. Simple stress and strain relationship: Stress and strain in two dimensions, principals tresses, stress transformation, Mohr’s circle. Simple bending theory|
|Mechanics: Flexural and shear stresses, unsymmetrical bending, shear centre. Thin walled pressure vessels, uniform torsion, bucking of column, combined and direct bending stresses|
|Structural analysis: Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in statically determinate structures and analysis of statically indeterminate structures by force/ energy methods|
|Structural analysis: Analysis by displacement methods (slope deflection and moment distribution methods), influence lines for determinate and indeterminate structures. Basic concepts of matrix methods of structural analysis|
|Concrete structures: Concrete technology-properties of concrete, basics of mix design. Concrete design-basic working stress and limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear|
|Concrete structures: Compression and torsion by limit state methods. Basic elements of prestressed concrete, analysis of beam sections at transfer and service loads|
|Steel structures: Analysis and design of tension, and compression members, beams and beam-columns, column bases. Connections-simple and eccentric, beam-column connections, plate girders and trusses. Plastic analysis of beams and frames|
|Construction materials: Characteristics of commonly used building materials like cement, aggregates, admixtures, fresh and harden concrete-properties and testing, mix design|
|Soil mechanics: Origin of soils, soil classification, three-phase system, fundamental definitions, relationship and inter relationships, permeability and seepage, effective stress principle, consolidation, compaction, shear strength|
|Foundation engineering: Sub-surface investigations-scope, drilling bore holes, sampling, penetration tests, plate load test. Earth pressure theories, effect of water table, layered soils. Stability of slopes-infinite slopes, finite slopes|
|Foundation engineering: Foundation types. Foundation design requirements. Shallow foundations-bearing capacity, effect of shape, water table, and other factors, stress distribution, settlement analysis in sands and clays. Deep foundations-pile types|
|Foundation engineering: Dynamic and static formulae, load capacity of piles in sands and clays, negative skin friction|
Water resources engineering
|Fluid mechanics and hydraulics: Properties of fluids, principle of conservation of mass, momentum, energy and corresponding equations, potential flow, applications of momentum and Bernoulli’s equation, laminar and turbulent flow, flow in pipes|
|Fluid mechanics and hydraulics: Pipe networks. Concept of boundary layer and its growth. Uniform flow, critical flow, and gradually varied flow in channels, specific energy concept, hydraulic jump. Forces on immersed bodies, flow measurements in channels|
|Fluid mechanics and hydraulics: Tanks and pipes. Dimensional analysis and hydraulic modelling. Kinematics of flow, velocity triangles and specific speed of pumps, and turbines|
|Hydrology: Hydrologic cycle, rainfall, evaporation, infiltration, stage discharge relationships, unit hydrographs, flood estimation, reservoir capacity, reservoir and channel routing. Well hydraulics|
|Irrigation: Duty, delta, estimation of vapour-transpiration. Crop water requirements. Design of lined and unlined canals, waterways, headworks, gravity dams and spillways. Design of weirs on permeable foundation. Types of irrigation system|
|Irrigation: Irrigation methods. Water logging and drainage, reclamation of defective soil|
|Water requirements: Quality standards, basic unit processes, and operations for water treatment. Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water|
|Water requirements: Sewage and sewerage treatment, quantity and characteristics of waste water. Primary, secondary, and tertiary treatment of wastewater, sludge disposal, effluent discharge standards. Domestic waste water treatment|
|Water requirements: Quantity of characteristics of domestic waste water, primary and secondary treatment unit operations, and unit processes of domestic waste water, sludge disposal|
|Air pollution: Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits|
|Municipal solid wastes: Characteristics, generation, collection, and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal)|
|Noise pollution: Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution|
|Highway planning: Geometric design of highways, testing and specifications of paving materials, design of flexible and rigid pavements|
|Traffic engineering: Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal design, highway capacity|
|Principle of surveying, surveying by chain, compass and theodolite, levelling and contouring, tacheometry, total station|
Computer science/ information technology
|Logic functions, minimization, design and synthesis of combinational, and sequential circuits; number representation and computer arithmetic (fixed and floating point)|
Computer organization and architecture
|Machine instructions and addressing modes, ALU and data-path, CPU control design, memory interface, I/O interface (interrupt and DMA mode), instruction pipelining, cache and main memory, secondary storage|
Programming and data structures
|Programming in C; functions, recursion, parameter passing, scope, binding; abstract data types, arrays, stacks, queues, linked lists, trees, binary search trees, binary heaps|
|Analysis, asymptotic notation, notions of space, and time complexity, worst and average case analysis; design: Greedy approach, dynamic programming, divide-and conquer; tree and graph traversals, connected components, spanning trees, shortest paths|
|Hashing, sorting, searching|
|Asymptotic analysis (best, worst, average cases) of time and space, upper and lower bounds, basic concepts of complexity classes-P, NP, NP-hard, NP-complete|
Theory of computation
|Regular languages and finite automata, context free languages and push-down automata, recursively enumerable sets and turing machines, undecidability|
|Lexical analysis, parsing, syntax directed translation, runtime environments, intermediate and target code generation, basics of code optimization|
|Processes, threads, inter-process communication, concurrency, synchronization, deadlock, CPU scheduling, memory management and virtual memory, file systems, I/ O systems, protection and security|
Internet and web technology
|Internet and web, IPv4 vs. IPV6, web client and server, HTML|
|OSI layer, protocols in various layers, different media in physical layer, TCP/ IP, SMTP/ Pop3, FTP|
Electric circuits and fields
|Network graph, KCL, KVL, node and mesh analysis, transient response of DC and AC networks; sinusoidal steady-state analysis, resonance, basic filter concepts; ideal current and voltage sources, Thevenin’s|
|Norton’s and superposition, and maximum power transfer theorems, two-port networks, three phase circuits; Gauss theorem, electric field and potential due to point, line, plane, and spherical charge distributions; Ampere's and Biot-Savart's laws|
|Inductance; dielectrics; capacitance|
|Mutual inductance; tuned coupled circuit|
Signals and systems
|Representation of continuous and discrete-time signals; shifting and scaling operations; linear, time-invariant and causal systems; Fourier series representation of continuous periodic signals; sampling theorem; Fourier, Laplace, and Z transforms|
|Single phase transformer-equivalent circuit, phasor diagram, tests, regulation and efficiency; three phase transformers-connections, parallel operation; autotransformer; energy conversion principles; DC machines-types, windings, generator characteristics|
|Excitation, armature reaction, and commutation, starting and speed control of motors; three phase induction motors-principles, types, performance characteristics, starting, speed control and applications; salient/ two reaction theory analysis|
|Single phase induction motors; synchronous machines-performance, regulation, and parallel operation of generators, motor starting, characteristics and applications; servo and stepper motors|
|Basic power generation concepts; transmission line models and performance; mechanical design (tension, sag etc); cable performance, insulation; corona and radio interference; distribution systems; per-unit quantities; bus impedance and admittance matrices|
|Load flow; voltage control; power factor correction; economic operation; symmetrical components; fault analysis; principles of over-current, differential and distance protection; solid state relays and digital protection; circuit breakers|
|System stability concepts, swing curves and equal area criterion; HVDC transmission and FACTS concepts for power quality, reactive power compensation, automatic generation control; renewable energy power generation (PV/ wind)|
|Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and Nyquist techniques; bode plots; root loci; lag, lead, and lead-lag compensation; state pole-zero addition, stability of transfer function (system); space model|
|State transition matrix, controllability and observability|
Electrical and electronic measurements
|Bridges and potentiometers; PMMC, moving iron, dynamometer and induction type instruments; potentiometer, galvanometers, damping scheme measurement of voltage, current, power, energy, and power factor; instrument transformers|
|Digital voltmeters and multimeters; phase, time, and frequency measurement; Q-meters; oscilloscopes; potentiometric recorders; error analysis|
Analog and digital electronics
|Characteristics of diodes, BJT, FET; amplifiers-biasing, equivalent circuit, and frequency response; oscillators and feedback amplifiers; operational amplifiers-characteristics and applications; simple active filters; VCOs and timers|
|Combinational and sequential logic circuits; multiplexer and de-multiplexer; Schmitt trigger; multi-vibrators; sample and hold circuits; A/ D and D/ A converters, 8051 micro controller|
|Introduction to 8085/ 8086 microprocessor basics and architecture, programming and interfacing of I/O devices|
Power electronics and drives
|Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs, and IGBTs-static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters-fully controlled and half controlled|
|Principles of choppers and inverters; basic concepts of adjustable speed DC and AC drives, and variable frequency drive|
|Mesh and nodal analysis, network theorems: Super position, Thevenin, and Norton's maximum power transfer, wye-delta transformation|
|Steady state sinusoidal analysis using phasors|
|Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, solution of network equations using Laplace transform: Frequency domain analysis of RLC circuits|
|2-port network parameters: Driving point and transfer functions|
|State equations for networks|
|Series and parallel resonance|
|Energy bands in silicon, intrinsic, and extrinsic silicon|
|Carrier transport in silicon: Diffusion current, drift current, mobility, and resistivity|
|Generation and recombination of carriers|
|P-N junction diode, Zener diode, tunnel diode, characteristics of diode, BJT, JFET, and MOSFET|
|Transistors at low and high frequencies, amplifiers, single and multi-stage|
|Operational amplifiers, characteristics, and circuit configurations|
|V-to-I and I-to- V converter|
|Op Amp based active filters|
|Oscillators and signal generators|
|Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS)|
|Combinatorial circuits: Arithmetic circuits, code converters, multiplexers, decoders, sequential circuits: Latches and flip-flops, counters, and shift-registers|
|Sample and hold circuits, ADCs, DACs|
|Microprocessor (8086): Architecture, programming, memory, and I/O interfacing|
Signals, systems, and communications
|Periodic and aperiodic signals|
|Continuous-time and discrete-time, Fourier series, continuous-time and discrete-time Fourier transform, DFT and FFT, Z-transform., transfer function, impulse, and frequency response of first-and second order systems|
|Convolution, correlation, and characteristics of linear time invariant systems|
|Pulse transfer function|
|IIR and FIR filters|
|Amplitude and frequency modulation, and demodulation|
|Sampling theorem, pulse code modulation|
|Frequency and time division multiplexing|
|Amplitude shift keying, frequency shift keying and pulse shift keying for digital modulation|
|Open loop and closed loop (feedback) systems, and stability analysis of these systems|
|Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems, and frequency response|
|Tools and techniques for LTI control system analysis: Root loci, Routh-Hurwitz criterion, bode and Nyquist plots|
|Control system compensators: Elements of lead and lag compensation, elements of proportional-integral-derivative (PID) control|
|State variable representation and solution of state equation of LTI control systems|
|Elements of vector calculus: Divergence and curl; Gauss' and Stokes' theorems, Maxwell's equations: Differential and integral forms|
|Wave equation, Poynting vector|
|Plane waves: Propagation through various media; reflection and refraction; phase and group velocity; skin depth|
Instrumentation and measurement
|Static and dynamic characteristics of instrument, basic electrical measurement such as resistance, inductance, and capacitance, oscilloscope and multimeter|
|Definition, branches, and scope of ecology|
|Ecological adaptation and concept of limiting factor|
|Different types of ecosystem in India|
|Structural and functional attributes of an ecosystem, biotic and abiotic components, food chain, food web, and energy flow|
|Ecological succession, biogeochemical cycles|
|Concept of population and population attributes, concept of carrying capacity and environmental resistance|
|Development and evolution of ecosystem|
|Atmospheric chemistry: Types of pollutants, their sources and impacts, pathways of pollutants|
|Major regions of atmosphere, particles, ions and radicals in atmosphere, thermochemical and photochemical reaction in atmosphere, smog, NOx, SOX, hydrocarbons, suspended particulate matter|
|Chemistry of action of pollutants and effects (acid rain, global warming, green house effect, and ozone layer depletion)|
|Soil chemistry: Inorganic and organic components of soil, nitrogen pathway in soil, fertilizers|
|Toxic chemicals in the environment: Pesticides, arsenic, cadmium, lead, mercury, carbon monoxide, PAN, MIC, radioactive wastes|
|Microbial metabolism of heavy metals, pesticides etc|
Water supply system
|Population estimation, design period, water demands, raw water source selection, collection, transport (preliminary hydraulic design of pressure conduits system), surface water treatment system and treated water distribution systems|
|Water quality parameters: Drinking water Standards and their significance (BIS 10500), gravimetric, potentiometric and spectrophotometric methods of determination of water quality parameters|
Wastewater collection and treatment systems
|Wastewater quantity and characteristics, wastewater collection, transport (hydraulic design of gravity sewerage system), primary, secondary (aerobic and anaerobic biological treatment), and tertiary treatment methods, effluent disposal standards|
|Sludge treatment and disposal|
Air noise pollution
|Air pollution meteorology, measurement of air pollutants and their standards, atmospheric dispersion of stack effluents, air pollution control devices|
|Noise pollution: Sources, effects, measurement, and control|
Solid waste management
|Municipal solid waste: Sources, composition, and characteristics of municipal solid waste, generation, collection rates, transportation, waste handling and separation, storage and processing at the source|
|Aerobic and anaerobic biological treatment engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment, and disposal)|
|Biomedical waste, E-waste and plastic waste management: Sources, hazards associated with biomedical wastes, biosafety, storage of biomedical wastes, disposal, and processing|
|Screening and scooping criteria, rapid and comprehensive EIA, environmental health impact assessment, environmental risk analysis|
Applied mechanics and design
|Engineering mechanics: Free body diagrams and equilibrium; trusses and frames; kinematics and dynamics of particles and of rigid bodies in plane motion, including impulse and momentum (linear and angular), and energy formulations; impact|
|Strength of materials: Stress and strain, stress-strain relationship and elastic constants, Mohr’s circle for Plane stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams|
|Strength of materials: Torsion of circular shafts; Euler’s theory of columns; strain energy methods|
|Theory of machines: Displacement, velocity, and acceleration analysis of plane mechanisms; dynamic analysis of slider-crank mechanism; gear trains; flywheels|
|Vibrations: Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, critical speeds of shafts|
|Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N curve; principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings|
|Design: Brakes and clutches|
Fluid mechanics and thermal sciences
|Fluid mechanics: Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation|
|Fluid mechanics: Viscous flow of incompressible fluids; boundary layer; elementary turbulent flow; flow through pipes, head losses in pipes, bends etc|
|Heat-transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, lumped heat capacity, heat conduction, fins; dimensionless parameters in free and forced convective heat transfer|
|Heat-transfer: Concept of using various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heat transfer, black and grey surfaces, shape factors, network analysis|
|Heat-transfer: Heat exchanger performance, LMTD and NTU methods|
|Thermodynamics: Zeroth, first and second law soft thermodynamics; thermodynamic system and processes; Carnot cycle. Basic concept of availability and irreversibility; behaviour of ideal and real gases, properties of pure substances|
|Thermodynamics: Calculation of work and heat in ideal processes; analysis of thermodynamic cycles related to energy conversion|
|Applications: Power engineering-steam tables, Rankine, Brayton cycles with regeneration and reheat IC engines: Air-standard otto, diesel cycles. Refrigeration and air-conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration|
|Applications: Refrigeration and air-conditioning-reverse Brayton cycle; moist air: Psychrometric chart, basic psychrometric processes. Turbomachinery: Pelton-wheel, Francis and Kaplan turbines-impulse and reaction principles, velocity diagrams|
Manufacturing and industrial engineering
|Engineering materials: Structure and properties of engineering materials, crystal imperfections, heat treatment, T-T-T diagrams for engineering materials|
|Metal casting: Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations|
|Forming: Plastic deformation of metals; fundamentals of hot and cold working processes; forging, rolling, extrusion, drawing, and sheet metal forming processes; shearing, deep drawing, bending, principles of powder metallurgy|
|Joining: Physics of welding, brazing, and soldering; gas welding and arc welding; design considerations in welding|
|Machining and machine tool operations: Mechanics of machining, single and multi-point cutting tools, tool geometry and materials, tool wear and; economics of machining; principles of non-traditional machining processes; principles of work holding|
|Machining and machine tool operations: Principles of design of jigs and fixtures|
|Metrology and inspection: Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; measurement of surface roughness; measurement of straightness and flatness, tolerance analysis in manufacturing and assembly|
|Computer integrated manufacturing: Basic concepts of CAD/ CAM and computer integrated manufacturing|
|Production planning and control: Forecasting models, aggregate production planning, scheduling, materials requirement planning|
|Inventory control: Deterministic and probabilistic models; safety stock inventory control systems|
|Modern trends in manufacturing: Just in time systems, supply chain management|
Thermodynamics and rate processes
|Laws of thermodynamics, activity, equilibrium constant, applications to metallurgical systems, solutions, phase equilibrium, Ellingham and phase stability diagrams, thermodynamics of surfaces, interfaces and defects, adsorption and segregation|
|Basic kinetic laws, order of reactions, rate constants and rate limiting steps; principles of electrochemistry-single electrode potential, electrochemical cells and polarizations, aqueous corrosion and protection of metals|
|Oxidation and high temperature corrosion-characterization and control; heat transfer-conduction, convection and heat transfer coefficient relations, radiation, mass transfer-diffusion and Fick’s laws, mass transfer coefficients|
|Momentum transfer-concepts of viscosity, shell balances, Bernoulli's equation, friction factors|
|Minerals of economic importance, comminution techniques, size classification, flotation, gravity and other methods of mineral processing; agglomeration, pyro-hydro-and electro-metallurgical processes; material and energy balances|
|Principles and processes for the extraction of non-ferrous metals-aluminium, copper, zinc, lead, magnesium, nickel, titanium and other rare metals; iron and steelmaking-principles, role structure and properties of slags, metallurgical coke, blast furnace|
|Direct reduction processes, primary and secondary steel making, ladle metallurgy operations including deoxidation, desulphurization, sulphide shape control, inert gas rinsing and vacuum reactors; secondary refining processes including AOD, VAD, VOD|
|VAR and ESR; ingot and continuous casting; stainless steelmaking, furnaces and refractories|
|Crystal structure and bonding characteristics of metals, alloys, ceramics and polymers, structure of surfaces and interfaces, nano-crystalline and amorphous structures; solid solutions; solidification; phase transformation and binary phase diagrams|
|Principles of heat treatment, properties and applications of steels, cast iron, aluminium and titanium alloys; surface treatments; recovery, recry stallization and grain growth; industrially important ferrous and non-ferrous alloys|
|Elements of X-ray and electron diffraction; principles of scanning and transmission electron microscopy; industrial ceramics, polymers, composites and biomaterials; electronic basis of thermal, optical, electrical and magnetic properties of materials|
|Electronic and opto-electronic materials|
|Elasticity, yield criteria, and plasticity; defects in crystals; elements of dislocation theory-types of dislocations, slip, and twinning, source and multiplication of dislocations, stress fields around dislocations, partial dislocations|
|Dislocation interactions and reactions; strengthening mechanisms; tensile, fatigue and creep behaviour; super-plasticity; fracture-Griffith theory, basic concepts of linear elastic and elasto-plastic fracture mechanics, ductile to brittle transition|
|Fracture toughness; failure analysis; mechanical testing-tension, compression, torsion, hardness, impact, creep, fatigue, fracture toughness, and formability|
|Metal casting-patterns and moulds including mould design involving feeding, gating and risering, melting, casting practice sins and casting, permanent mould casting, investment casting and shell moulding, casting defects and repair|
|Hot, warm, and cold working of metals, metal forming-fundamentals of metal forming processes of rolling, forging, extrusion, wired rawing and sheet metal forming, defects informing; metaljoining-soldering, brazing, and welding|
|Common welding processes of shielded metal arc welding, gas metal arc welding, gas tungsten arc welding and submerged arc welding; welding metallurgy, problems associated with welding of steels and aluminium alloys, defect sin welded joints|
|Powder metallurgy; NDT using dye-penetrant, ultrasonic, radiography, eddy current, acoustic emission and magnetic particle methods|
Polymer science and engineering
|Natural polymers, synthetic polymers-homo polymers, copolymers, cross linked polymers, polymerisation-addition polymerization, step growth polymerisation, degree of polymerisation, polydispersity, molecular weight of polymers|
|Molecular weight distribution|
|Polymerisation techniques, analysis and characterisation of polymers, melt flow index, polymer processing: Injection moulding, blow moulding, extrusion, compression moulding, polymer additives, polymer blends and alloys|
|Engineering plastics, commodity plastics, high performance plastics|
|Application of polymers|
|Chemical bonding atomic structure, organic chemistry, name reaction, physical chemistry chemical kinetics-spectroscopy|
|Mechanical properties of material-magnetic and dielectric materials-conductor and semi conductor materials|
|Law of mechanics-Lame's theorem-forces, moments and couples-displacement, velocity and acceleration-friction-moment of inertia|
|Classification of textile fibres; essential requirements of fibre forming polymers; gross and fine structure of natural fibres like cotton, wool and silk|
|Introduction to important bast fibres; properties and uses of natural, and man-made fibres; physical and chemical methods of fibre and blend identification and blend analysis|
|Polymerization of nylon-6, nylon-66, polyethyl terephthalate, polyacrylonitrile and polypropylene; melt spinning processes, characteristic features of PET, polyamide and polypropylene spinning; wet and dry spinning of viscose, and acrylic fibers|
|Molecular architecture, amorphous and crystalline phases, glass transition, plasticization, crystallization, melting, factors affecting Tg and Tm; process of viscose and acetate preparation|
|Post spinning operations such as drawing, heat setting, tow-to-top conversion and different texturing methods|
|Methods of investigating fibre structure|
|Density, X-ray diffraction, birefringence, optical and electron microscopy, IR absorption, thermal methods (DSC, DMA/ TMA, TGA); structure and morphology of man-made fibres, mechanical properties of fibres, moistures absorption in fibers|
|Fibre structure and property correlation|
Yarn manufacture and yarn structure and properties
|Principle of yarn formation in ring spinning, rotor spinning, air-jet spinning, wrap spinning, twist less spinning and friction spinning|
|Concepts of single and folded yarn twist, Idealized helical yarn structure; yarn count and twist factors, twist contraction; limits of twist|
|Idealized packing; measurement of packing density and radial packing density of yarn; packing in actual yarns; specific volume of yarns; equation of yarn diameter|
|Ideal migration, tracer fiber technique, characterization of migration behaviour, migration in spun yarns, mechanisms of migration, effect of various parameters on migration behaviour|
|Translation of fiber properties into yarn properties; extension of continuous filament yarn for small strains and large strains; extension and breakage of spun yarn, blended yarn structure, structure and property relationship of ring, rotor, air-jet|
|Friction spun yarn and their comparison|
Fabric manufacture and fabric structure
|Principles of cheese and cone winding processes; random and precision winding; package faults and their remedies; different sizing systems, sizing of spun and filament yarns, primary and secondary motions of loom, fabric appearance and weaving performance|
|Dobby and jacquard shedding; mechanics of weft insertion with shuttle; warp and weft stop motions, warp protection, weft replenishment; functional principles of weft insertion systems of shuttle-less weaving machines|
|Principles of multiphase and circular looms|
|Principles of weft and warp knitting; basic weft and warp knitted structures|
|Classification, production, and areas of application of nonwoven fabrics|
|Basic woven fabric constructions and their derivatives; crepe, cord, terry, gauze, leno, and double cloth structures|
|Pierce geometrical model, flexible thread model and rigid thread model, square fabric, jammed structure, square and jammed fabric, crimp interchange, maximum possible cover factor|
|Yarn cross sections in the fabric, elastical model of plain woven fabrics; thickness, cover and maximum set of woven fabrics|
|Concepts of fabric handle and its evaluation|
Statistical quality control and textile testing
|Random variable, continuous random variable-normal distribution, discrete random variable-binomial distribution and Poisson's distribution|
|Normal approximation to binomial and Poisson distribution|
|Sampling techniques, sample size, and sampling errors|
|Correlation analysis, significance tests, quality control chart, acceptance of sampling, and analysis of variance|
|Measurement of fibre length, fineness, crimp, strength, and reflectance; measurement of cotton fibre maturity and trash content; HVI and AFIS for fibre testing|
|Measurement of yarn count, twist and hairiness; tensile testing of fibres, yarn, and fabrics; evenness testing of yarns; testing equipment for measurement test methods of fabric properties like thickness, compressibility, air permeability, drape|
|Crease recovery, tear strength, bursting strength, abrasion resistance, cover factor etc|
|FAST and Kawabata instruments and systems for objective fabric evaluation|
|Methods for determination of wash, light, and rubbing fastness|
|Evaluation of fastness properties with the help of grey scale|
|Sewability testing, seam strength, seam slippage, seam pucker, needle cutting index|
|Concept of geotextiles: Automotive textiles-textile reinforced composite material, protective clothing, medical textile, filtration textile, sports and recreation textiles, agro textiles, building textiles, packaging textile|
|Electronics textiles, their properties, and applications|
Preparatory processes for chemical processing
|Chemistry and practice of preparatory processes for cotton, wool, and silk|
|Mercerization of cotton|
|Preparatory processes for nylon, polyester, and acrylic and polyester/ cotton blends|
|Classification of dyes|
|Dyeing of cotton, wool, silk, polyester, nylon, and acrylic with appropriate dye classes|
|Dyeing polyester/ cotton and polyester/ wool blends|
|Batch wise and continuous dyeing machines|
|Dyeing of cotton knitted fabrics and machines used|
|Dye fibre interaction|
|Introduction to thermodynamics and kinetics of dyeing|
|Styles of printing|
|Printing thickeners including synthetic thickeners|
|Printing of cotton with reactive dyes|
|Printing of wool, silk, nylon with acid and metal complex dyes|
|Printing of polyester with disperse dyes|
|Methods of dye fixation after printing|
|Resistand discharge printing of cotton, silk, and polyester|
|Printing of polyester/ cotton blends with disperse/ reactive combination|
|Transfer printing of polyester|
|Developments in inkjet printing|
Advances in chemical processing
|Basic criteria for combining pretreatment methods, combined desizing and bleaching, scouring and bleaching, desizing, scouring and bleaching of natural, man-made and blended textiles|
|Concept of short liquor processing: Advantages and limitations, short liquor pretreatment and dyeing of various textiles, performance assessment of each method|
|Colour fastness criteria of dyed and printed textile|
|Methods to determine colour fastness to washing, light, perspiration, sublimation, and chlorine treatment and their grading|
|Importance and method of evaluation of wetting agents, optical brighteners, flame retardants, water repellents, and soil release agents|
|Development of new continuous and batch machines as well as modified processes|
|Specification of water for use in industries and its discharge to public sewage, biodegradation of chemicals|
|Measurement of waste water load|
|Preventive measures to reduce waste water load|
OJEE M.B.A Syllabus
Computer and business fundamentals
OJEE M.C.A. Syllabus
|Statement, negation, implication, converse, contraposititve, conjunction, disjunction, tautology, truth table, principle of mathematical induction|
Sets, relation, and function
|Union, intersection, difference, symmetric difference, and complement of sets, De Morgan's laws, Venn diagram, Cartesian product of sets, power set, relation and function: Domain, codomain, and range of a relation, types of relations|
|Relation and function: Equivalence relation, representation of three dimensional space by RxRxR, types of functions and their domain, and range such as: Constant function, identity function, modulus function, logarithm function, exponential function|
|Types of functions and their domain, and range such as: Greatest integer function|
|Surjective, injective, and bijective functions, sum, difference and quotient of functions, and their range, composite function, inverse of a function|
|Real numbers (algebraic and order properties, rational and irrational numbers), absolute value, triangle inequality, am ≥ gm, inequalities (simple cases), complex numbers as ordered pairs of reals|
|Representation of a complex number in the form a+ib and their representation in a plane, Argand diagram|
|Algebra of complex numbers, modulus, and argument of complex numbers, conjugate a complex number, quadratic equation in real numbers, and their solution, relation between roots and coefficients, nature of roots, formation of quadratic equation with roots|
|Permutations and combinations, fundamental principle of counting, permutation as an arrangement and combination as a selection, meaning of P (n, r) and C (n, r), simple applications, binomial theorem for positive integral index|
|General term and middle term, properties of binomial coefficient and their applications, identities involving binomial coefficients|
Determinants and matrices
|Determinants and matrices up to third order, minors and cofactors, properties of determinants, matrices up to third order, types of matrices, algebra of matrices, properties of determinant, evaluation of determinants, adjoint and inverse of matrix|
|Application of determinants and matrices to the solution of linear equations (in three unknowns)|
|Compound angles, multiple and submultiple angles, trigonometric identities, solution of trigonometric equations, trigonometric functions, properties of triangles, inverse trigonometric function and their properties|
Coordinate geometry of two dimensions
|Cartesian system of rectangular coordinates in a plane, distance formula, section formula, locus and its equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the coordinate axes|
|Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, distance of a point from a line equations of internal and external bisectors of angles between two lines|
|Coordinates of centroid, orthocentre, and circumcentre of a triangle, equation of family of lines satisfying various conditions|
|Pairs of straight lines, standard form of equation of a circle, general form of the equation of a circle radius and centre of a circle, equation of a circle when the end points of a diameter are given|
|Points of intersection of a line and a circle and condition for a line to be tangent to a circle, equations of tangents to a circle, equations of parabola, ellipse, and hyperbola in simple forms, their tangents in standard form|
|Condition of tangency|
Coordinate geometry of three dimensions
|Coordinates of a point in space, distance between two points, section formula, direction cosines and direction ratios, projection, angle between two intersecting lines|
|Angle between two planes, angle between a line and a plane|
|Distance of a point from a line and a plane|
|Equations of a line and a plane in different forms, intersection of a line and a plane, coplanar lines|
Sequence and series
|Definition, infinite geometric series, arithmetico-geometric series, exponential and logarithmic series, geometric mean between two given numbers, relation between AM and GM|
|Vectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional space, scalar and vector products, scalar and vector triple product|
|Concept of limit, limits of polynomial functions, rational functions, trigonometric functions, exponential and logarithmic functions, continuity of functions, continuity and differentiability, derivative of standard algebraic and transcendental functions|
|Differentiation of trigonometric, inverse trigonometric, logarithmic, and exponential functions, derivative of composite functions, functions in parametric form, implicit differentiation, differentiation of the sum, difference|
|Product and quotient of two functions, derivatives of order up to two, Rolle's and Lagrange's mean value theorems, applications of derivatives: Rate of change of quantities, monotonic-increasing and decreasing functions|
|Applications of derivatives: Maxima and minima of functions of one variable, tangents and normals, geometrical application of derivatives such as finding tangents and normals to plane curves|
|Standard methods of integration (substitution, by parts, by partial fraction, etc), integration of rational, irrational functions and trigonometric functions|
|Definite integrals and properties of definite integrals, fundamental theorem of calculus, evaluation of definite integrals, determining areas of the regions bounded by simple curves in standard form|
|Definition, order, degree of a differential equation, general and particular solution of a differential equation, formation of a differential equation, solution of a differential equations by method of separation of variables|
|Homogeneous differential equations of first order and first degree, linear differential equations of the form dy/dx +p(x)y = q(x)|
Probability and Statistics
|Measures of dispersion: Calculation of mean, median, mode of grouped and ungrouped data, calculation of standard deviation, variance, and mean deviation for grouped and ungrouped data, probability: Probability of an event|
|Probability: Addition and multiplication theorems of probability, mutually exclusive events, independent events, compound events, conditional probability, addition theorem, Baye’s theorem, random variables|
|Probability: Probability distribution of a random variate (binomial distribution only)|
Introduction to computer
|Brief history of computers, components of a computer, computer related general knowledge, application of computers, classification of computers, windows|
|Number system with general base, number base conversion, elementary arithmetic operation|
|Introduction to algorithm and computer languages|
OJEE 2023 Preparation Tips
The candidates who will apply for OJEE 2023 have to prepare for the exam. Here, we share some preparation tips for OJEE 2023 exam.
• Candidates must purchase good study material
• Make effective study plan
• Aspirants must focus on working on the weak areas
• Practice previous years question papers to increase speed and accuracy
• Revise properly for the exam
Student Appearing Vs Seat Available
|Year||Student Appeared||Seats Available|
OJEE 2023 Exam Pattern
OJEE B.Pharma Exam Pattern
• There will be 180 questions as per OJEE B.Pharm exam pattern
• Only one test booklet will be provided to candidates.
• The duration of the exam is 3 hours
• Candidates can either appear for Physics, Chemistry and Mathematics or Biology.
• There will be 45 questions each in Physics and Chemistry.
• Biology or Mathematics will have 45 questions each.
• Ranking will be done based on the marks obtained in Physics, Chemistry and Mathematics or Physics, Chemistry and Biology.
• Candidates also choose to appear in all subjects – Physics, Chemistry, Mathematics and Biology.
• All subjects will have 45 questions each.
• Ranking will be done on the basis of higher marks of either Physics, Chemistry and Mathematics or Physics, Chemistry and Biology.
• Evaluation will be done for total 135 questions
OJEE M.Tech Exam Pattern
• According to OJEE exam pattern, the duration of the test is 2 hours
• There will be 90 objective type multiple choice questions.
• The entrance exam was conducted for 2 hours.
• Total 60 questions in the test will be branch related while 20 will be asked from Engineering Mathematics and 10 from Arithmetic and Logical Reasoning.
OJEE M.B.A Exam Pattern
OJEE MBA 2023 entrance test assesses a candidate’s knowledge regarding Verbal Ability, Analytical Reasoning, General Knowledge, Comprehension and Computer and Business Fundamentals. There will be a total of 120 questions which have to be answered within 2 hours. The structure of OJEE MBA 2023 exam pattern is given below.
Number of questions
|Computer and Business fundamentals|
OJEE M.C.A. Exam Pattern
• The question booklet of OJEE MCA carries total 120 questions.
• There will be 60 questions each from Mathematics and General Awareness
• Total duration of exam is 2 hours.
OJEE Admit Card will be issued in online mode, at the official website. Candidates will be required to download two copies of the OJEE 2023 admit card. To download the admit card, candidates will have to enter the application number and date of birth. The admit card will carry information related to the candidate’s name, paper, date of birth, gender, test centre name category, etc.
In case there is an error in OJEE admit card, candidates should contact the officials immediately after taking a printout of the same. Candidates have to submit one copy of admit card duly signed by the invigilator. The other one should be retained by the candidates till the completion of the admission process.
OJEE 2023 Exam Centers
Documents Required at Exam
- Two copies of admit card
OJEE 2023 results will be available in online mode at ojee.nic.in. OJEE results will be available in the form of scores and ranks. To download the rank card, candidates will have to enter their application number, date of birth, and security pin. A separate merit list will be prepared for each paper. OJEE result displays the name of the candidate, roll number, marks obtained in each subject, rank, and aggregate marks.
Candidates who wish to know their subject-wise marks should write to the OJEE officials along with a demand draft of Rs 400. This should reach the office within 10 days from the date of publication of the OJEE result 2023. Candidates can also request for re-totalling/re-addition by paying Rs 500 through demand draft with 7 days from the date of announcement of result.
Steps to Download the OJEE Rank Card 2023
- Step 1: Visit the official OJEE website (ojee.nic.in).
- Step 2: Click on the "Rank Card - OJEE 2023" and enter the required details.
- Step 3: Result will appear on the screen.
Snapshot of OJEE 2023 Result Login Window
OJEE 2023 Cutoff
OJEE cutoff 2023 will be released by the participating institutes. Odisha Joint Entrance Examination cutoff will be available in form of closing and opening rank. Besides, the examination authority has prescribed course-wise marks criteria for admission to the different programmes.
Mode of Counselling: Online
Candidates with CAT, MAT, XAT, ATMA, NIMCET, GATE, GPAT, JEE Mainscores are eligible for admission through counselling of OJEE. OJEE counselling 2023 will be held for different courses on different dates. The counselling procedure of OJEE 2023 is explained below.
Step 1: Registration
• Click on ‘New Registration’ to register for counselling
• Read the agreement and click on the ‘I Agree’ button to proceed further.
• Select the appropriate course, roll number, and date of birth.
• Click on ‘Submit’ to proceed
• The data provided by candidates during application will be pre-filled. Candidates have to enter the fields like address, mobile number, bank details, etc.
• Enter password of 8-13 characters.
• Verify the details of registration and make changes if any.
• Click ‘Print details’ to take a printout of the registration slip.
Step 2: Paying the Counselling Fees
• Deposit the counselling registration fee online.
• The registration fee for counselling.
Step 3: Choice Filling
• Click on the ‘Fill Choice’ button to enter your choice of colleges.
• The list of colleges and their branches will appear on the screen in an alphabetical manner.
• The computer screen will also display the choices filled in by the candidates.
• Candidates can add choices of colleges and branches by add multiple buttons and add buttons.
• Arrange the filled in choices as per the preferences of college/ branch.
• Select as many Institutions and branches on priority basis
Step 4: Mock Result
• After choice filling, the mock results will be published.
• Candidates can know their allotment status on a particular date as per choice filled by them.
• Candidates can change their choice as per preferences.
• Candidates can add more choice if they do not get allotted in order to ensure allotment as per his/her rank during the first round of allotment.
Step 5: Choice Locking
• The choice locking facility will be activated after the mock result.
• Make sure that the choices entered are correct
• Click on ‘Lock’ button if you are satisfied with the choices
• An OTP will be sent to the candidate’s registered mobile number.
• They are required to lock their choices through OTP
• Enter the number in the required space and submit
• Candidate’s choices given will be locked
• Take printout of the locked choice
• This is a one-time facility. Once the choices are locked it cannot be changed
Step 5: 1st round of Seat Allotment
• Allotment of seats will be based on rank, choice, and category/reservation of the candidates.
• Candidates can check their seat allotment status online
• Candidates not allotted seat in this round have to wait for next round allotment for any upgraded allotment
Step 6: Payment of Admission Fees
• All allotted candidates have the requisite admission fees.
• Fees for SC, ST, or PC candidates is Rs 5000 while it is Rs 10,000 for General candidates.
• Fees can be paid online or challan.
• Candidates not paying their admission fees are not allowed for document verification
• Seat allotted to cancel.
Step 7: Document verification
Candidates have to report at the assigned nodal centre for document verification with original and self-attested photocopy of necessary documents. They are also required to carry registration slip for verification.
Step 8: 2nd round Seat Allotment
• In the second round of allotment, candidates can check their status.
• There will be either up-gradation of choices or it will remain the same as the previous allotment depending on the choice number, rank, and availability of seat.
• Unallotted candidates of first-round may get allotment in this round
• Candidates allotted seat in the second round have to report for document verification
• Except those who have withdrawn their seats are considered as In process candidates and are eligible to appear for final allotment
Step 9: Final Allotment
• Candidates previously allotted seats will get final allotment along with newly allotted candidates
• Finally allotted candidates who have completed their document verification can download their final allotment letter
• Newly allotted candidates have to undergo the process of document verification and pay admission fees
• All allotted candidates have to report to the colleges as per the schedule and time along with the final allotment letter and the fee deposit slip
Documents Required at Counselling
- Odisha JEE (OJEE) rank card
- Registration slip
- Photocopy of H.S.C. mark sheet
- Photocopy of 10+2 pass certificate and mark sheet
- Photocopy of school leaving/ college leaving certificate
- Original certificate from the head of the institution last attended
- Original ‘permanent resident of Odisha’ certificate/nativity certificate from concerned tahasildar
- Original certificate of employment of candidate’s parent/spouse employer: govt. of Odisha/govt. of India/govt. of India undertakings and/govt. of Odisha undertakings located in Odisha at the time of application
- Original SC/ ST certificate by birth
- Original certificate of ex-serviceman
- Original certificate in support of outlying Oriya speaking tract (OL) and certificate issued by OJEE with respect to Oriya test conducted by OJEE
- Original relevant managerial/ supervisory experience certificate of minimum five years, for candidates seeking admission to PGDM (executive) programme. The candidate has to submit a no objection certificate from the present employer
- JEE Main rank card
Frequently Asked Questions (FAQs)
Question:What if a candidate fails to take print out of OJEE 2023 admit card?
If any candidate fails to take the print out of OJEE admit card 2023, then he or she must contact OJEE 2023 office immediately.
Question:How can a candidate check section-wise marks secured?
All candidates who wish to know their subject-wise marks have to make a written request and enclose a demand draft of Rs. 400 in favour of “OJEE-2023” drawn on any Nationalised Bank at Bhubaneswar. The request should reach the office within 10 days of result publication.
Question:What will be the medium of OJEE MBA 2023?
OJEE MBA 2023 will be conducted in English medium.
Question:How many sections will be there in OJEE MBA 2023 question paper?
There will be a total of four sections, according to the exam pattern of OJEE MBA 2023. The sections are Quantitative Techniques, Analytical and Logical Reasoning, General Awareness and Business Fundamentals and Verbal Reasoning and Comprehension.
Question:Can a candidate fill more than one application?
As per the latest update, candidates can fill and submit only one application form.
Questions related to OJEE
i got ojee general rank 4064 can i get admission in CSE branch of vssut Burla
You have secured a very good rank. As per your information you have chances to get admission in Vssut Burla with CSE branch. As per previous year information the cutoff was 31000 for CSE branch.
Cutoff varies every year depending on various factors. Keep in mind that your chances to grab a seat will vary on the following basis:
- Number of seats available
- Number of students applied for the same branch
- Performance of the students
- The category you belong to etc.
Go through this to predict colleges based on your rank:
Hope this information helps you.
i have secured 4500 rank in ojee. can I get admission in kanak manjari institute of pharmaceutical sciences rourkela general category
My Jee main rank ST category rank was 18,865.Can i get admission in vssut after ojee?
The selection is based on the JEE and OJEE ranks. There's good and bad in everything, so if you want to join you can. You gonna have a good life here. All the best. The qualifying cut-off person child for the general category is 50 and for SC or St or OBC, it is 40 percentile. Cut-off in different institutes may depend upon various factors such as the number of candidates appearing for the exam, seat availability, and difficulty of the examination.
Best Of Luck!
what is the ojee rank accepted by RCM for MBA
Regional College of Management, Bhubaneswar is a private autonomous college of Biju Patnaik University of Technology, Rourkela . The college offers the course of MBA on the basis of CAT , CMAT , XAT , MAT , OJEE score. So yeah! The score of OJEE MBA is accepted by the RCM college.
For more information regarding the college consider the link provided below:
For more information regarding OJEE MBA consider the link provided below:
I hope this helps. Wish you a great day!
utkal University get admission in int mba course through ojee
The eligibility criteria for MBA in Utkal University is passed bachelor's degree in any discipline from a recognized university securing 50% aggregate, there is relaxation of 5% for reserved categories, admission is done through OJEE, or candidates who have sucessfully qualified entrance exams of CAT/MAT too are eligble to apply this further followed by group discussion and personal interview.