List of Online Courses and Certifications

Swayam offers the Inspection and Quality Control in Manufacturing online course as an elective course with a duration of four weeks. The course curriculum is replete with helpful learning resources, including multimedia video lectures, books & references, weekly assignments, and a discussion forum online. 

The Inspection and Quality Control in Manufacturing certification syllabus has been curated by IIT Roorkee. The curriculum is divided into two primary parts: destructive and non-destructive testing.  

Throughout the Inspection and Quality Control in Manufacturing course, you will learn how to identify and diagnose problems in different kinds of materials. Also, ways to resolve the defects immediately. This way, you will become adept at testing material samples and measuring the fault expertly. 

After completing the Inspection and Quality Control in Manufacturing certification program, you will have in-depth knowledge of the inspection and measurement techniques necessary for maintaining quality control during production. 

Swayam hosts the Introduction to Experiments in Flight online course at the undergraduate level. It is a course in aerospace engineering and flight mechanics spread across four weeks of extensive instructor-led learning. 

In the Introduction to Experiments in Flight certification syllabus, you will learn how to conduct various aircraft experiments to determine specific parameters. As such, you'll build a robust foundation in designing aircraft experiments. 

The Introduction to Experiments in Flight certification course combines theoretical and practical learning seamlessly. This is because the concepts you cover during the online video lectures will be demonstrated practically from inside the aircraft cockpit by the course instructor. 

Besides, there will be weekly assignments, printable/downloadable reading materials, an online discussion forum, and a list of books & references for you to enjoy a smooth learning experience. Upon successfully completing the Introduction to Experiments in Flight course, you can also take the final exam and obtain the e-certificate.

A Brief Introduction of Micro – Sensors course by Swayam introduces learners to micro - and nano-sensors fabrications. This elective study is based on communications and electrical engineering. An e-certificate is available with the course. For the certificate, candidates must submit all assignments and write a final proctored examination.

Set at a postgraduate level of study, the Brief Introduction of Micro – Sensors certification syllabus integrates online learning through video lectures and practical application of concepts through assignments. Learners will understand the principles of strain-stress in energy dissipation used to design such sensors. Other topics include pressure sensors, lithography, MEM sensor applications, microfabrication, and accelerometers.

The Brief Introduction of Micro – Sensors training is curated by IISER Bhopal. Students will interact with the video lectures recorded by Professor Santanu Talukder from the institute. Any student interested in learning more about such sensors can apply for the course. Companies based around semiconductor and processing technology prefer students who have completed the study.

An Introduction to Cardiovascular Fluid Mechanics certification course is based on chemical engineering subject. It is an elective study spread across four weeks. Learners can pursue a course completion certificate. For that, they need to complete the course, submit all assignments, and register for an end-term assessment by paying a nominal fee.

An Introduction to Cardiovascular Fluid Mechanics certification syllabus employs a total of four learning modules. Learners can proceed to the next learning module after completing the topics covered previously. They will experiment with the mechanics that supply liquids within the human body through simulated tools. It covers topics such as rheology, pulsatile flows, morphology, solid and fluid mechanics.

An Introduction to Cardiovascular Fluid Mechanics training is developed by IIT Guwahati. Students will learn under Dr Raghvendra Gupta, an associate professor of the Chemical Engineering department at IIT Guwahati. Moreover, biomedical companies such as Johnson and Johnson and GE Healthcare offer industry support to the course. 

Corrosion science explores the process of corrosion in metallic and non-metallic structures. The Cathodic Protection Engineering online programme attempts to dig deeper and explain some essential means of corrosion control in buried metallic structures. This is a free-to-learn curriculum by Swayam and IIT Bombay, accredited by AICTE.

Furthermore, the Cathodic Protection Engineering certification belongs to the 'Metallurgy and Material science and Mining Engineering' and 'Materials Joining' categories. If you are interested in learning this course, you should also note that this is a short-term FDP programme that runs for just four weeks.

This programme is suitable for undergraduates, postgraduates, and industry professionals. Aspirants will have to submit four assignments during the course tenure, which will help their understanding and progress.

What's more, after finishing the Cathodic Protection Engineering program, you will also get a chance to obtain a verified digital certificate offered by Swayam and NPTEL. This requires you to clear a proctored exam and fulfill other criteria to achieve certification.

Separation processes are an integral operation in many modern pharmaceutical and chemical plants. The Introduction to Process Modeling course will take you through such processes, both conventional and novel. The traditional processes include methods like distillation, adsorption, and absorption. These techniques are quite common, and the technologies associated with them are well developed.

The Introduction to Process Modeling certification syllabus will also cover newer processes such as membrane-based separation. These techniques are slowly gaining popularity in today’s modern industries. The later course modules will extensively focus on these new techniques, as well as topics like membrane filtration, gel layer controlling, and osmotic pressure.

The Introduction to Process Modeling online training is developed by IIT Kharagpur and delivered by the online learning platform: Swayam. The course features four assignments, and reading material is provided to you as a supplement to the video lectures. You can also opt for the final exam if you wish to earn a certificate. The course has been approved by AICTE and has a duration of four weeks.

Convective Heat Transfer online programme aims to provide a comprehensive understanding of convection. Convection is a significant form of heat transfer linked to fluid mechanics and thermodynamics. Swayam and IIT Roorkee have collaborated and designed this free short-term course for students interested in learning about convective heat transfer.

Moreover, the Convective Heat Transfer certification belongs to the ‘Mechanical Engineering' subject category and is an elective course. The course can be finished in four weeks. The curriculum goes into detail to explain mass transfer analogies and phase change heat transfer. You can also learn the fundamental concepts with the help of mathematical examples, derivations and weekly assignments.

Furthermore, the Convective Heat Transfer training will help you earn a course certificate after finishing all the modules in four weeks. There are three criteria to obtain a soft copy of the certificate that NPTEL can verify. The certificate will carry the logo of IIT Roorkee.

Neuroscience is a multidisciplinary science that helps us understand and study the nervous system. Demystifying the Brain online program attempts to provide a computational perspective on how the brain functions. The elective course comes under Biological Sciences and Bioengineering subjects and is accessible for students from both engineering sciences and biological sciences. 

The Demystifying the Brain certification syllabus dives into the history and evolution of neuroscience and further explains neurons and the nervous system in detail. IIT Madras and Swayam learning have collaborated to deliver this FDP course free of cost to promote quality education for all. The best part is that you can easily finish the whole course in four weeks and even gain a verified digital certificate at the end. 

After finishing the short-term course, you just have to give a final exam to be eligible for the certificate to upgrade your CV.

Research communication and scientific communication is an essential skill if one wishes to pursue research and development. These allow you to put your ideas lucidly and enable others to understand your work. The objective of the Introduction to Professional Scientific Communication certification program is to get postgraduate students familiar with written and oral communication, along with ethics in research.

The Introduction to Professional Scientific Communication online training covers a wide range of concepts, both theoretical and practical. Topics like technical writing, hypothesis testing, reasoning, and structuring a scientific report are also included in the syllabus. Several books and references will also be made available to you once the course begins.

Introduction to Professional Scientific Communication online program is delivered by Swayam and designed by IIT Kanpur. It’s a postgraduate-level program meant for science and engineering students. You can also get your hands on the much-coveted Swayam certificate, which will help you pursue a career of your choice or conduct the research efficiently.

The Machining Science certification training spans four weeks, enabling you to complete essential machining topics quickly. It is an online program approved by AICTE and delivered by Swayam. The program receives industry support from manufacturing, automobile, and aeronautical industries.

Machining Science online program will primarily focus on machining processes and metal cutting techniques. It also covers topics like mechanics of metal cutting, machining economics, friction in metal cutting processes, and measurement of cutting forces. You will gain an in-depth understanding from a theoretical and practical point of view.

The learning process of the Machining Science online course includes weekly assignments, readings, and video lectures. You also get access to an online forum where you can clear all your doubts and get in touch with course instructors. As for the course instructor, you will be taught by Prof. Sounak Kumar Choudhury, a faculty at IIT Kanpur. You can also earn an e-certificate by appearing for the final test conducted by Swayam.

We need to go through various processes to get a finished product from the raw material. These manufacturing processes include metal removal or mass removal, constant mass operations, casting, welding, etc. This mechanical engineering course on Manufacturing Processes - Casting and Joining by Swayam places emphasis on two primary techniques: casting and welding. 

Throughout the course duration of four weeks, the Manufacturing Processes - Casting and Joining syllabus will touch upon various casting processes and characteristics. Candidates will analyze various casting aspects like how the riser and gating systems are designed under the guidance of Professor Sounak Kumar Choudhury. 

This Manufacturing Processes - Casting and Joining certification course gives students the chance to earn a verifiable certification by IIT Kanpur and NPTEL and learn from esteemed IIT Kanpur faculty. This is a course of the undergraduate level and has no prerequisites. Anyone interested can enroll and learn from this MOOC for free.

Metal cutting is done by the application of mechanical forces. It involves the usage of tools like lathes, shapers, and milling machines. The course on Metal Cutting and Machine Tools by Swayam provides candidates with the opportunity to study these in detail with Professor Asimava Roy Choudhury from IIT Kharagpur. 

This will be a four-week online training. The Metal Cutting and Machine Tools training will cover different aspects of metal cutting, such as geometrical analysis of metal cutting tools. Candidates will go into further detail about the orientation and make-up of these tools, their features, and applications. Also, they will supplement their learning by solving numerical problems. 

The total duration of the Metal Cutting and Machine Tools syllabus is ten hours. Candidates can test their learning and gain greater insights during the MCQ discussion lecture after each week. This is an AICTE-approved FDP course by IIT Kharagpur. Thus, its optional certification is up for grabs and will be of immense value to the students.

IIT Kharagpur, one of the most renowned engineering and technology institutions in India, has developed the Non-Traditional Abrasive Machining Processes certification course. Through this program, candidates will learn about three major types of machining, including Ultrasonic, Abrasive Water Jet Machining, and Abrasive Jet Machining. 

These methods comprise a major part of the non-traditional techniques. The Non-Traditional Abrasive Machining Processes curriculum consists of descriptive parts which describe the machine configurations and types of technology. Further, there are process derivations, analyses, and numerical problems to make every concept clear to the candidates. The syllabus is of the UG level of study. 

The course instructor will discuss various multiple-choice questions to consolidate the students’ understanding. The Non-Traditional Abrasive Machining Processes training is verified by AICTE as an FDP course. Candidates can complete this course quickly in just four weeks and apply to get the paid certification, which is optional. Interested students can also appear for the offline exam.

Adaptive control refers to a set of techniques and approaches used to control plans whose dynamics are uncertain or keep changing. Using adaptive control techniques, you can reduce the unpredictability of such plans. The Nonlinear and Adaptive Control certification course will delve into such concepts in-depth and train candidates in essential and advanced features of adaptive control. 

The candidates interested in joining this program need to have an essential understanding of MATLAB and Simulink, along with Lyapunov Stability Theory. The Nonlinear and Adaptive Control syllabus deals with relevant topics in great detail and runs for four weeks. IIT Delhi has developed this online training which is available on Swayam for free. 

This is an elective course at the postgraduate level. Professor Shubhendu Basin, Associate Professor in IIT Delhi’s Department of Electrical Engineering will teach the Nonlinear and Adaptive Control online course with two teaching assistants. The candidates also have the chance to become certified in this course by option for the paid certification. 

Swayam’s Optical Sensors online course is an elective, four-week curriculum dealing with optical biosensors and their introductory working fundamentals. Developed in collaboration with IIT Roorkee, this program is set at PG/UG-level and belongs to the ‘Photonics’ and Electrical and Electronics Engineering categories. The entire training features weekly modules, evaluations, optional exams, and term-end notes for research. 

The Optical Sensors certification syllabus commences with the elementary components, performance parameters, characteristics, etc. It then proceeds with optical phenomena, sensing applications, tissues’ optical properties, biomaterials’ optics, and more. Through an extensive curriculum, the course familiarises candidates with the mesmerizing sphere of optics principles-based sensors. In doing so, it also helps them gain industry-relevant skills to pursue career growth in this domain. 

While a basic optics experience is enough to join this training, students must complete all in-course assessments and register for Swayam’s offline test (proctored) to acquire the Optical Sensors certificate. This will further help them display their skills and seek lucrative job opportunities in Photonic Sys and related organizations.

The Equipment Design – Mechanical Aspects online programme spans four weeks, allowing you to cover core subject topics swiftly. It is an online course hosted by Swayam and approved by AICTE. As such, it receives industry support from all chemical process plants.

Equipment Design – Mechanical Aspects certification syllabus will primarily focus on important chemical plant equipment, including evaporators, absorbers, reactors, etc. You will understand all the equipment designs in-depth and from a mechanical POV.

Through weekly assignments and live classes conducted by an expert faculty, you will learn how different types of stress and strains impact mechanical designs in the Equipment Design – Mechanical Aspects course. Additional reference and reading materials will also be available to you for holistic learning.

Swayam provides an online forum as well to foster healthy discussions between students and course instructors. You can also clear your doubts if any. After successful course completion, you can apply for the proctored exam and earn the Equipment Design – Mechanical Aspects certificate.

There is a substantial requirement for electrical energy around the world. Several countries, including India, are adopting UHV (ultra-high voltage) AC and DC transmission. The main objective of the Recent Advances in Transmission Insulators online course by Swayam is to understand the significance of basic principles of insulation design.

Recent Advances in Transmission Insulators programme will also discuss different kinds of insulators and recent developments in insulator technology up to UHV levels. During this course, you will also know about vital components in a transmission system such as conductors, earth wire, accessories, insulators, towers, foundations, and hardware fittings.

The Recent Advances in Transmission Insulators certification course will provide you with knowledge on major challenges faced by utilities in the design of overhead transmission insulators for UHV-DC/AC, especially in contaminated circumstances. You will learn through practical examples, 11 hours of video content, and assignment exercises. The course also provides an e-certificate on the fulfillment of some eligibility criteria.

The Scheduling Techniques in Projects certification course is a four-week-long online programme crafted by the Indian Institute of Technology (IIT), Delhi. It is designed to provide in-depth knowledge of one of the significant aspects of project management, i.e., scheduling. You will study all the latest scheduling techniques that are available in the implementation or research stage.

The Scheduling Techniques in Projects training will make you adept at scheduling ranging from simplistic network methods to matrix-based techniques. You will learn many types of scheduling like information-driven, resource-driven, and logic-driven scheduling. Furthermore, you will explore complex concepts under these topics, including LoB (Line of Balance), CPM (Critical Path Method), RDM (Relationship Diagramming Methods), PDM (Precedence Diagramming Method), etc.

During the Scheduling Techniques in Projects programme, you will also learn other exciting scheduling techniques such as lean scheduling and 4D BIM. This online course is a Faculty Development Programme (FDP) that is approved by the AICTE. The course uses practical and hypothetical examples from industry along with tutorials to give a hands-on experience of learning.

The Smart Materials and Intelligent System Design certification course aim to introduce you to the domain of advanced functional materials. During the programme, you will get proficient in the foundational concepts of smart materials. You will explore common smart materials such as magnetostrictive and piezoelectric materials, electroactive polymers, etc.

The Smart Materials and Intelligent System Design programme by Swayam is a four-week-long online course brought to you by the Indian Institute of Technology (IIT), Kanpur. The course is also approved by the AICTE. You will study various topics covering composites, control systems, materials, basic electronics, and informatics. This elective course also offers a digital certificate after fulfilling the specified criteria.

Through the learnings of the Smart Materials and Intelligent System Design training, you will realise the importance of smart materials in developing actuators and special sensors for a host of industrial applications. These include defence, medical, aerospace, manufacturing, and other specific engineering applications.

Two-phase flows are encountered in various industrial processes such as nuclear reactor technology, chemical processes, power generation, food production, automotive industries and aerospace. That is why the  Two-Phase Flow and Heat Transfer programme will provide a thorough understanding of two-phase flows with and without phase change. 

Two-Phase Flow and Heat Transfer certification is a four-week elective course that is approved by AICTE as an FDP course. This is an online course wherein the course material will be available on Swayam, the online learning platform. The syllabus of this course has been curated by the faculty of the Indian Institute of Technology, Roorkee in association with NPTEL.

Two-Phase Flow and Heat Transfer is a UG/PG course in mechanical engineering. The course will be taught by Dr Arup Kumar Das of IIT Roorkee. The course also offers certification. You need to have knowledge of fluid mechanics and heat transfer to be able to comprehend this course completely.

The Commercial Fruit Production: Pomegranate & Guava certification course will take students through the latest production techniques. The course pays attention to the planting techniques, inter culturing and special practices, fertilizer and irrigation requirement, climatic requirements, varieties, maturity indices, and harvesting techniques, etc.

The Yashwantrao Chavan Maharashtra Open University, Nashik, Maharashtra, offers the Commercial Fruit Production: Pomegranate & Guava online training. The university is known for the diversity of courses it offers to the students, ranging from actuarial science to commercial fruit production techniques. This four-week-long core type, of course, falls under the domain of Agricultural and Food Engineering.

Dr Madhuri Sonawane, who has several books, YouTube videos, and published research articles under her name, teaches the Commercial Fruit Production: Pomegranate & Guava online course. She is currently working as an Assistant Professor at the School of Agricultural Sciences, YCMOU, Nashik. Given her scale of expertise in the field, students can be assured of being trained by one of the best-known industry experts.

Belonging to the IT, and Computer Science field, this Begin Robotics certification is a mini-course offered together by the University of Reading, and FutureLearn. Robots are everywhere, even on Mars, and even present in our entertainment films. The great Stephen Hawkings had also predicted that robots will be a threat to human beings in the coming times. So this introductory course is here to explain all about robots and their different forms.

Begin Robotics certification syllabus is here to explain the robotic history, its evolution, and how these exciting machines can be put to work by humans in their daily walks of life. Not only this the candidates get to explore the modernized application of Robotics and human relationships with them.

Begin Robotics training will help to find the basics of robot design, and bring the candidates a step closer to how Hawking’s brain worked in cybernetics. The University of Reading is a reputed organization in research so one can even do a robotic test drive to enhance their practical knowledge with this  IT course.

The recent technology of flying robots has been utilized for various applications like mini helicopters or quadrotors. They are widely used in 3D construction and aerial filming of industrial sites. The time calls for the need for machines that run without the supervision of pilots for hours. The Autonomous Navigation for Flying Robots certification course focuses on autonomous navigation for quadrotors. This course is provided by TUM for learners who are keen to learn the concept of autonomous navigation. 

Autonomous Navigation for Flying Robots training will be delivered by industry experts with the help of instructor-paced learning videos, quizzes, and a browser-based quadrotor simulator. The duration of the course is 4 weeks and the learner must give at least 4 hours per week to complete the course on time. The learner shall be trained extensively on the browser-based quadrotor simulator and will be given practical training. The candidate shall also receive Autonomous Navigation for Flying Robots certification by EdX after the completion of the course. 

Sustainability in Architecture: An Interdisciplinary Introduction online certification is developed by the Polytechnic University of Valencia and taught by a team of industry experts including María Valles-Planells - Associate Professor at the Polytechnic University of Valencia, Elena de la Poza Plaza - Associate Professor at the Polytechnic University of Valencia and Naoko Ellis - Professor at the University of British Columbia, which is offered by edX for the participants who want to study the basic principles and concepts of sustainable architecture.

Sustainability in Architecture: An Interdisciplinary Introduction online course is a 4-week program. Provides a holistic approach to architecture for sustainability and imparts knowledge of the fundamental components of sustainability evaluations as well as current design trends. Sustainability in Architecture: An Interdisciplinary Introduction online classes also cover technical ideas related to energy, carbon footprint, and material qualities.  The candidates can join the course either by paying the fee or free of cost. In the free mode, the students can audit the programme for a limited duration whereas in the paid mode, they can access the course materials unlimitedly and get a certificate of completion. 

The study of plant life and development is covered in the biological field of plant biology. This branch of biology, known as botany, encompasses a wide range of scientific fields that research plants. Understanding Plants - Part II: Fundamentals of Plant Biology online certification is created by Tel Aviv University (TAU) - Israel's largest institution of higher learning and taught by  Professor Daniel Chamovitz Ph.D., President, the Ben-Gurion University of the Negev, which is offered by Coursera.

Understanding Plants - Part II: Fundamentals of Plant Biology online classes comprises 5 hours of video-based lectures which are geared toward candidates interested in learning the fundamentals of plant biology. Understanding Plants - Part II: Fundamentals of Plant Biology online course discusses topics like plant structure, plant organ, and plant cells and explain the process of the growth and development of the plant as well as discusses the process of sugar synthesis, photosynthesis and explains how plants convert carbon dioxide from the atmosphere and water from the soil into oxygen.

The Microwave engineering and antennas online course is offered by the education provider Coursera and developed by the Eindhoven University of Technology. The course study is about engineering involved in microwaves and the analysis of the working of antennas. The programme is scheduled for a period of eight weeks consisting of content worth thirty eight hours. The course is instructed by lecturers Bart Smolders, Ulf Johannsen, Domine Leenaerts who are from diverse backgrounds of academic and industrial nature from the Centre for wireless technology Eindhoven(CWT/e).

The Microwave engineering and antennas online training is done by experimental techniques and the course provides the learners with the knowledge about the process of designing microwave circuits and antennas and the design challenge where the students are given the opportunity to create an active phased array system. The modules in the course are delivered to the candidates through innovative web lectures, readings, online quizzes and a book is made available for the students for their study.

Global Navigation Satellite Systems And Applications certification is a 4 weeks programme proposed by NPTEL and IIT Roorkee and is launched on the Swayam provider website. This is an elective course falling under the course category of civil engineering. The course is absolutely free to learn but the certification demands extra thousand rupees. 

Global Navigation Satellite Systems And Applications training provides a solid understanding of the DEMs which are the digital elevation models, and their applications in earth sciences, and civil engineering. Later on, in the course curriculum, the candidates can identify their source, derivatives, generation techniques, errors, and limitations of the DEMs. The industry support for this certification course is offered by some Geoinformatics companies, like NIIT, Leica Geoinformatics, ESRI India, MapmyIndia, ISRO, and more.

Adiabatic Two-Phase Flow and Flow Boiling in Microchannel certification is a 4 weeks course that is offered on the Swayam platform jointly by NPTEL and IIT Kharagpur. The level of this programme is undergraduate or postgraduate that offers 1 credit point to all its participants. Catering to all engineering graduates, or masters, this course is prepared to offer to all the participants, a fundamental idea on multiphase flow, and boiling heat transfer flow catering in microchannels.

Adiabatic Two-Phase Flow and Flow Boiling in Microchannel training discusses the concepts like a multiphase flow in micro vis-a-vis macro domain, several patterns, and experimental techniques of analysis, the unique flow boiling heat transfer, and other influences of parameters operating for flow morphology. This course is otherwise free unless a certificate is asked for which is given only when some requisite criteria of assignments and exams are fulfilled by the participants.

Basics of software-defined Radios and Practical Applications is a 4 weeks programme that is a joint initiative of NPTEL and IIT Roorkee. This course offers an electronic copy of the certificate for its participants. The course teaches that SDR is a very important part of modern communication where processes used for hardware implementation are defined using the domain of software regarding flexibility.

Basics of software-defined Radios and Practical Applications training are used for providing the description of the several components of software-defined radios along with their significance, and relevance. The participants shall also understand the interrelationship between digital, and analog power processing and spectrum transmission of signals. At the final stage of this course, candidates will understand what kind of term solutions are used for industrial datasheets, and the motivation for appropriate transceiver design.

Introduction to Dynamical Models in Biology certification is a 4-week programme launched by IIT Guwahati and NPTEL along with the association provider platform Swayam. This online free course is designed for understanding the different ever-changing models in biology.

Mathematical modeling in recent times has transformed into becoming an important part of ecology, biology, and cell biology. This Introduction to Dynamical Models in Biology training course tends to introduce the students of the biology field to different concerts and tools related to mathematics. The syllabus also focuses on the fundamental ODE-based concept of models which can be later on connected with the different experiments conducted for the subject Biology. Basically, the students shall get acquainted with topics like numerical simulation, cell signaling, analytical techniques, and more. The certification at the end can be cross-checked, and considered for verification on the NTPEL site by prospective employers.