hello aspirant,

I hope that you are doing absolutely great.

Since you have not mentioned your GATE Rank, it is quite difficult to predict precisely which colleges you can get with this GATE Score in CE. The GATE cutoff varies every year and is different for different category students. Also, the qualifying GATE Cutoff depends on several factors like : previous year cutoff trends, difficulty level of paper, etc.

However, looking at the previous year cutoff trends, with your GATE score in Civil Engineering, your GATE Rank must lie between 9k-10k. It's still a prediction.

However, with this GATE Score and rank, you can get some of the colleges (NIT's) which are listed below :

National Institute of Technology Arunachal Pradesh-- VLSI Design & Embedded Systems

National Institute of Technology Nagaland --Communication Engineering

National Institute of Technology Agartala --Communication Engineering

National Institute of Technology Agartala-- Integrated Energy System

National Institute of Technology Manipur -- VLSI Design & Embedded Systems

Further, if you wish to know about the GATE QUalifying Cutoff, you can follow the below link to know more  : https://engineering.careers360.com/articles/gate-cutoff-for-ce

also, you can check the GATE college predictor tool to know your admission chances i other colleges : https://engineering.careers360.com/articles/gate-college-predictor

I hope that this will help.

Hi aspirant,

Indian Institute of Information Technology, Lucknow GATE 2021 cut-off score for M.Tech Computer Science Engineering branch is given below.

General Category: Opening: 637 and Closing: 557

EWS Category: Opening: 589 and Closing: 500

OBC NCL Category: Opening: 523 and Closing: 419

SC Category: Opening: 354 and Closing: 290

Cut-offs varies from year to year and depends on many factors like number of seats available, difficulty level of the exam, caste category of the candidates, number of students appeared in the exam, etc.

For more information about M.Tech Computer Science Engineering branch in Indian Institute of Information Technology, Lucknow go through below mentioned link.

https://www.careers360.com/university/indian-institute-of-information-technology-lucknow/mtech-computer-science-course

You can predict Colleges you can get for your GATE score, using below mentioned link.

https://engineering.careers360.com/gate-college-predictor

May this information was helpful to you.

All The Best!!

BMS College of Engineering is a private NAAC A++ autonomous college under Visvesvaraya Technological University, Belagavi . See the eligibility condition of the course as per the college website is:

A candidate who has passed qualifying examination (i.e., BE/B. Tech Degree) in the relevant discipline and obtained an aggregate minimum of 50% of marks (for General Merir Candidates) taken together in all the subjects of all the years / semesters of the Degree Examination is eligible for admission to ME / M. Tech programs. ( 45% of marks in qualifying examination in case of SC, ST and Cat-I candidates. (Reservation is applicable only for Karnataka Candidate)

Now there are no relevant list of Subjects provided by the college. I would recommend you to contact the college in order to know more about the eligibility condition. You can get the college details by visiting the link below:

https://bmsce.ac.in/home/COE-Contact-Us

To know more about the college, visit the link below:

https://www.careers360.com/colleges/bms-college-of-engineering-bangalore

I hope this answer helps. All the very best for your future endeavors!

Hi there,

Apart from GER score you must keep following things in mind to take admission in best university:

TOEFL score: your TOEFL score must be above 100 and IELTS should be atleast 7.

It will be better if you would have done internships related to your course.

Make good statement of purpose (SOP)

Extra curricular activities will also be helpful for you to take admission in best university.

Having work experience also helps

Hope it helps you

Good luck!

Hello Aspirant!!!

The Syllabus for the Entrance Exam which is conducted by Jamia Milia Islamia Institute in objective type mode, is available in their official website. An overview of the syllabus:

Engineering Materials: Basic concepts of structure of solids, Crystalline materials, Defects in crystalline

materials, Alloys and binary phase diagrams, Structure and properties of common engineering materials,

Heat treatment of steels, Plastics, Ceramics and composite materials, Common applications of various

materials.

Metal Casting: Design of patterns, Moulds and cores, Solidification and cooling, Riser and gating

design, Design considerations.

Metal Forming: Plastic deformation and yield criteria, Fundamentals of hot and cold working processes,

Load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing,

bending) metal forming processes, Principles of powder metallurgy.

Joining and Welding: Solid State welding e.g. Friction welding, Friction stir welding, Resistance

welding, Fusion Welding including electric arc welding ,Gas welding and Thermit welding, Brazing and

soldering, Adhesive bonding.

Machining and Machine Tool Operations: Mechanics of machining, Single and multi-point cutting

tools, Tool geometry and materials, Tool life and wear, Economics of machining, Principles of non-

traditional machining processes such as EDM, ECM, PAM, EBM, LBM, AJM, USM etc.

Metrology and Inspection: Limits, Fits and tolerances, Linear and angular measurements, Comparators,

Interferometry, Form and finish measurement, Alignment and testing methods, Tolerance analysis in

manufacturing and assembly.

Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools, Basic

concepts of manufacturing cell, FMS and CIM.

Methods Study and Work Measurements: Time study, Motion study, Principles of motion economy,

Flow process chart, Left-hand-right-hand chart, Man-machine chart, String diagram, Therbligs, Micro and

memo motion studies, Work sampling, Method time measurement systems.

Production Planning and Control: Forecasting models, Aggregate production planning, Scheduling,

Materials requirement planning, Supply chain management, Product design and development.

Inventory Control: Deterministic and probabilistic models, Safety stock inventory control systems etc.

Good luck!!!

Hello Aspirant!

There were various factors in Engineering which decides Dual course better or not. It also differ according to the stream selection in Engineering. I think the dual-degree programs are fantastic, but why go for an early  commitment. And if the MTech part of the dual degree is in a specialized  area, that should be avoided. When students don't even know the  difference between Computer Science and Electrical Engineering, asking  them to commit that they will work on "Power" or "Wireless" or "VLSI"  after three or four years is simply ridiculous.

But there were certain benefits of pursuing dual degree:

• A major advantage of a dual degree program is saving money. This is because earning a dual degree is typically faster than earning each degree individually. This could mean not having to pay for an extra year or two of schooling.
• Having two degrees allows for more professional options. Having two degrees means graduates will have twice the number of potential jobs they are qualified for.
• Single biggest advantage of a dual degree is students can save at least one year of schooling time.
• Access to alumni networks from each respective college or department, along with the connections made with classmates, will be valuable for advancing a professional career.

With advantages there are various disadvantages like: Short-Term Cost ,Real World Experience Still Helpful ,Intense Studying ,Putting a Professional Career on Hold. So it differ from person to person , what they want to purse in there life.

Thank You!

Hi there,

Yes you can take admissions into IIT after passing GATE examination. You can easily pursue mtech in ckmouter science as it is most preferred branch on today's world.

There are a variety of options available for you to get a job. Generally, after graduating in Computer science tou will able to grab jobs in IT sector for various roles such as Software developer engjneer, software testing, analyst and many more.

It eventually opens a door to lot of job options for you.

So it is a good option to do MTech in computer science.

Check out this link for more detailed information: https://engineering.careers360.com/colleges/list-of-me-mtech-in-computer-science-engineering-colleges-in-india

https://www.careers360.com/courses/m-tech-master-of-technology

Thank you:)

Hello,

Last the applications for admission to M.E/M.Pharm/M.Phil in Birla Institute of Technology and Science started in the month of April 22, 2021 and ended on June 30, 2021. So it is expected that the application process may begin in the month of April tentatively. This is not the official schedule. BITS will release the notification for admission to M.E/M.Pharm/M.Phil. The eligibility criteria to get admission to M.E/M.Phram is that a candidate must have passed qualifying examination in the relevant field with minimum 60% aggregate marks and for admission to M.Phil a candidate must have passed qualifying examination in the relevant field with minimum 55% aggregate marks from a recognized board.

Admission to all M.E. (except Software systems) and M.Pharm. programmes is the based on marks obtained in the BITS Higher Degree admission test or based on GATE/GPAT score. Admission to M.E. in Software Systems will be through the BITS HD test only. So if you are seeking admission to M.E in any program other than Software systems then GATE Score is considered for admission. If you are seeking admission to M.E Software system then you need to apply for BITS HD Entrance Examination. Please visit the official website from time to time so that you not miss important announcements. Here is the link to the official website

https://www.bitsadmission.com/hdmain.aspx

Hi

That was an very good match and approach if you are very passionate and intrested in mechanical , be sure you are going to excel and dedicated about that

Mechanical is one of the core subjects in engineering and jntu will be given very good academic.

After this integrated course you gonna have a better future

If you have applied for the Part time MTech courses and if you be allotted a seat, then obviously it will be for the Part time MTech and you can't change it. Now if there are some college which have a lot of seat vacant in the Full time MTech then by talking to the college authority you may discuss about it but in general, you can't change the mode of program in the verification or at the counselling if you have applied and appeared for an exam to get admitted in Part time MTech course.

To know more about MTech, visit the link below:

https://www.careers360.com/courses/m-tech-master-of-technology

I hope this answer helps. All the very best for your future endeavors!