Online Engineering And Architecture Courses & Certifications

Basic Building Blocks of Microwave Engineering & Design Principles of RF And Microwave Filters And Amplifiers Certification will introduce students to the three basic building blocks of microwave engineering namely microwave transmission system, passive circuit components at microwave frequency level and microwave active devices.

Basic Building Blocks of Microwave Engineering & Design Principles of RF And Microwave Filters And Amplifiers Classes will make an effort to emphasise the necessity for a basic understanding of the building blocks in somewhat detail so that fundamental design principles behind a microwave network. 

All students get a Basic Building Blocks of Microwave Engineering & Design Principles of RF And Microwave Filters And Amplifiers Certification by Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by Government of India. 

VLSI Signal Processing Certification is important for the future as digital signal processing (DSP) has emerged as the single most key component in all electronic applications such as multimedia and mobile communications, video compression, network cameras, smartphones, radar imaging, GPS, biomedical signal processing, etc to name just a few. 

VLSI Signal Processing Classes will start with topics such as the graphical representation of DSP algorithms. Also covering graphs used like Signal Flow Graph (SFG), Data Flow Graph (DFG), and lastly dependence graph.

All students get a VLSI Signal Processing Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Fundamentals of MIMO Wireless Communication Certification is a radio communications technology or RF technology that is being used in many new technologies these days such as Wi-Fi, LTE (Long Term Evolution) radio, wireless, RF, and many other technologies.

Fundamentals of MIMO Wireless Communication Classes teach candidates about newer MIMO wireless technology that provides increased link capacity and spectral efficiency combined with improved link reliability using what was previously seen as interference paths.

All students get a Fundamentals of MIMO Wireless Communication Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Design of Power Electronic Converters Certification is about the basics of power electronics, different types of power converters that are used in industry, and their applications such as DC/DC, AC/DC, DC/AC, and AC/AC Converters. It mainly converts the electrical energy of one type into another with different characteristics and is used to drive any device that requires an input of electric power other than that supplied by the primary power source.

Design of Power Electronic Converters Classes covers the basics of Power Electronics Types of Power Converters and their usage in the optimization of algorithms that select optimal parameters and components.

All students get a Design of Power Electronic Converters Certification from the Indian Institute of Technology Guwahati (IIT Guwahati) under the Swayam Initiative by the Government of India. 

Digital Protection of Power System Certification begins with a state-of-the-art survey of theories and methods of digital/numerical relays and phasor measurement units (PMUs) along with IEC 61850 substation and automation protocols.

Digital Protection of Power System Classes gives a theoretical overview and examples of practical engineering solutions to a range of technical issues, including load shedding and frequency relaying, reclosing and synchronizing, protection problems caused by the interconnection of distributed energy resources in the grid, and digital protection of various electrical apparatus, such as generators, transformers, transmission lines, etc.

All students get a Digital Protection of Power System Certification from the Indian Institute of Technology Roorkee (IIT Roorkee) under the Swayam Initiative by the Government of India. 

In the field of electrical and electronics engineering, circuit and system-level designs play a significant role. The CMOS Digital VLSI Design course by Swayam is an excellent start to learning the basics of design specifications and system-level blocks. The course is equipped with assignments that aren’t only conceptual but are hands-on for the betterment of the candidate's understanding. 

Meanwhile, the CMOS Digital VLSI Design certification syllabus covers important technical concepts like MOS Transistor, CMOS inverter, combinational logic design, power analysis, SPICE simulation, sequential logic design, to name a few. The course begins with the basics and deep dives into complex digital circuits that are an integral part of the current technology. 

Taught by Prof. Sudeb Dasgupta from IIT Roorkee. It is beneficial to both undergraduate and postgraduate students interested in pursuing their careers in the field.

The Electronic Packaging and Manufacturing Certification course is an 8-week online program. While Swayam is utilized to deliver the course, the course syllabus is devised and endorsed by IIT Kharagpur. This course certificate is also conferred by the Indian Institute of Technology, Kharagpur, and NPTEL.

Electronic Packaging and Manufacturing training is a part of the mechanical engineering elective curriculum. Professor Anandaroop Bhattacharya is the instructor of this certification course. This course aims to give students a fundamental understanding of the technologies and procedures needed for the production and packaging of electronic goods.

Sustainable energy usage has become a necessity, not only in order to deal with climate change but also to improve the performance of systems and the productivity of companies. The Energy Efficiency and Sustainability online course provides knowledge of energy efficiency as it is vital now to have good knowledge of energy efficiency for everyone engaged in the manufacturing, infrastructure, Petroleum management, energy, and transport industries. 

The Energy Efficiency and Sustainability certification by Getsmarter and the University of Cape Town provides a thorough general overview and Economics of the energy efficiency environment. The course analyses recent energy sector changes, regulations and explores energy consumption in industrial and commercial contexts. 

The Energy Efficiency and Sustainability online course teaches to verify energy efficiency by means of industry-accepted technologies and evaluate energy-efficiency project's financial feasibility and establish a solid strategic plan for intervention. The course teaches students how to make significant progress in the energy sector as well as how to implement effective energy efficiency measures in the energy sector. Thus the course emphasizes sustainable development.

Solar Energy Engineering: Comprehensive Exams is the course offered for the students who have completed MicroMaster's Solar Energy Engineering course. The certification course by EdX shall train the candidate for the PV1x, PV2x, PV3x, and PV4x exams and will help them to pass the exams with flying colors. The course is an initiative by the Delft University of Technology for the students who are pursuing their careers in Solar Energy Engineering.  

Solar Energy Engineering: Comprehensive Exams training is an 8 weeks course that shall provide students with reading material and will assess them for the exams. The training will be provided by the experts on the EdX portal. The aim of the course is to enhance the skills of students and to make them clear in related exams of Solar energy engineering. The candidate shall also receive Solar Energy Engineering: Comprehensive Exams certification by EdX on choosing the verified track learning mode. 

The Management in Engineering: Strategy and Leadership certification by MIT explores key principles and practices used in engineering management. Delivered via edX, this online certification course is part of the Principles of Manufacturing MicroMasters program. The Management in Engineering: Strategy and Leadership online course enables learners to implement basic functional business knowledge from 2.961.1x by analysing case studies. This MIT online certification course delivered via edX also focuses on the application of individual skills and management tools essential for innovation management.

The Management in Engineering: Strategy and Leadership certification syllabus provides graduate engineers with an overview of management issues. In addition, it opens various career options including managers, engineering practitioners, and entrepreneurs. Students can take the Management in Engineering: Strategy and Leadership certification course through selected readings from texts and cases and develop individual skills and management tools. Students will get an option to enroll either in the free audit track that offers limited access or they can choose to upgrade to the paid version which is the verified track.

The Computational Science in Engineering certification course enables students to understand the needs of the rapidly evolving field of computer science. Students can approach a wide array of challenges in the areas of social sciences and engineering through the power of computation. Spread over eight weeks, the course falls under the domain of Aerospace engineering. 

The Computational Science in Engineering certification syllabus ensures that students understand the different engineering and science phenomena via simulations. They are taught the much-required mathematical modeling skills, efficient algorithms, numerical analysis, software design, computer architecture, and much more. 

The goal of the Computational Science in Engineering training is to let students explore the basics of scientific computing. This includes the framework observed in applied mathematics such as ODEs, Linear algebra, and PDEs. Students who sign up for this undergraduate course are taught by Professor Ashok De, Associate Professor, Department of Aerospace Engineering at IIT Kanpur currently 

The Systems Engineering: Theory and Practice certification course offers students an overview of the systems engineering design approach from theoretical and practical perspectives. The focus will be on how the open-ended problems can be solved using realistic aspects like manufacturability, safety, reliability, aesthetics, operations, sustainability, and ethics.

Professor Deepu Philip will deliver the Systems Engineering: Theory and Practice online training. He is currently a Department of Industrial and Management Engineering and Design Programme faculty at IIT Kanpur. He has years of academic and industrial experience with leading institutes and firms worldwide. Thus, students can be assured of striking the right balance between theoretical and practical training in the lectures. The AICTE has also approved the course, which falls under the broad discipline of Management Studies.

The Systems Engineering: Theory and Practice certification syllabus covers a wide range of concepts from program risk reduction, prototype development and data analysis to design validation, integration and testing of the complete system features. The course curriculum perfectly suits both Undergraduate and Postgraduate students’ academic needs.

Offered by the Delft University of Technology, the Introduction to Aerospace Structures and Materials training runs for eight weeks. Learners will understand the manufacturing and safety processes behind various aircraft. This course lends an expert perspective into the nuances of manufacturing aerospace materials and structures.

The Introduction to Aerospace Structures and Materials Syllabus comprises assignments, home-experiments, online lectures, and quizzes to facilitate learning. This study, divided into eight parts, focuses on the factors that play a pivotal role in aeronautical ware production. Some of the topics studied in detail include aerospace structures, fatigue, durability, manufacturing techniques, material properties for mechanical purposes, and other engineering and scientific principles.

Experts in Aerospace Engineering and teachers from the Delft University of Technology instruct the Introduction to Aerospace Structures and Materials Certification course. Students can add a verified certificate to their arsenal by paying the required fee. With pre-recorded video classes, students can learn and repeat lessons according to their convenience. 

The candidates may enroll in this course for free or by paying a certain amount of money. There are 2 tracks namely verified or audit track which offers direct access to the course materials. If the candidates opt for the verified mode they are entitled to unlimited access and if they opt for the audit access, they are going to receive only limited access to the course materials.

The Design of fixed-wing Unmanned Aerial Vehicles online course is offered by the online course provider Swayam, an initiative by the Ministry of Education, Government of India. The 8 weeks AICTE approved undergraduate/postgraduate level elective course includes 2 credit points. This Design of fixed-wing Unmanned Aerial Vehicles training presents the basic sizing and design process for fast expanding fixed-wing UAV technology, as well as prototype testing, stability, and performance analysis. The Design of fixed-wing Unmanned Aerial Vehicles syllabus introduces basic design parameters, design algorithm, and simulation. 

The Introduction to Airplane performance online course is an 8 weeks program offered by Swayam, an initiative by the Ministry of Education, Government of India. This course is intended to give an integrated basic study of airplane performance as well as a sense of flight testing and aircraft design. The Introduction to Airplane performance syllabus covers various topics such as airplane performance characteristics, standard atmosphere, the thrust required, range and endurance, cruise and manoeuvre, landing performance, control and stability, design basics, etc.

The ‘Organic Farming for Sustainable Agricultural Production’ online course is about the principles and techniques associated with organic farming. The course delves into discussing nutrient management, vermicompost processing, and the use of biopesticides and biocontrol agents. This course on organic farming is a National Program for Technology Enhanced Learning(NPTEL) online course offered by the Indian Institute of Technology Kharagpur. This is a core course provided on the Swayam online education platform for the students belonging to the domain of agriculture and food engineering, agricultural science, and environmental science.

This program is approved by the AICTE and organized for eight weeks. The course educator for this online training is Dr. Dillip Kumar Swain from the department of agriculture and food engineering at IIT Kharagpur. 

The ‘Organic Farming for Sustainable Agricultural Production’ training program is a postgraduate level course that is categorized under the agriculture and food engineering domain. The students of this faculty development program can earn two credit points and a course certificate that consists of the NPTEL and IIT Kharagpur logos, after completing the course. 

Instrumentation and Process Control in the Food Industry is an 8-week online programme. The course is meant for undergraduate-level students who intend to step into the food industry. The Instrumentation and Process Control in Food Industry Certification Course is an online free programme offered by Swayam in collaboration with  IIT Kharagpur. Though it is free to join and pursue, the learners are required to sit for the exam and secure a certification qualifying score to get a hold of the certificate. 

Instrumentation and Process Control in Food Industry Certification is a course that is approved by AICTE (All India Council for Technical Education). The courses will guide you through process control and instrumentation in the food industry. Plus, the learners will explore stability analysis, food process control, control tuning and the like. The course is led by Prof. Ashis Kumar Datta who is a faculty at the Department of Agricultural and Food Engineering at IIT Kharagpur. 

Engineering/Architectural Graphics - part I - Orthographic projection online course is a short-term core program offered by Swayam in association with IIT Roorkee. This eight-week-long course falls under the architecture and planning category. It aims to introduce the study of engineering graphics that architects and engineers use to design new products.

The Engineering/Architectural Graphics part I certification syllabus explores the grammar and vocabulary of engineering graphics and its distinct components that include 2D and 3D. This program's curriculum will mainly focus on the 2D section of graphics.  It will prepare you to use the techniques and tools necessary in engineering.

Further, the Engineering/Architectural Graphics part I training includes eight assignments during the course's tenure and a proctored exam at the end, which is optional. This exam along with the assignments will help you obtain a digital and verified certificate after finishing all the modules. You can attach the certificate to your resume after finishing the course.

In the Landscape Architecture and Site Planning - Basic Fundamentals certification course, the events that led to rapid urbanization and the recent trends that are there in the domain of urbanization will also be accessed. The course will be covering the reasons behind the - fast depletion of natural resources with special mention to the vegetation. The Landscape Architecture and Site Planning - Basic Fundamentals certification syllabus will also be covering the reasons for the depletion of the natural ground-cover along with the landscapes. And will be elaborating on topics such as the sources of natural hazards like- flood, landslide, soil, heat island, soil erosion, and others. 

The Landscape Architecture and Site Planning - Basic Fundamentals training will be held for the students who are willing to pursue a career in the field as- planner, architecture, or engineers. The twelve-week programme will thus be helping the students to develop their skills in the field of site planning and landscape.

The Structure, Form, and Architecture certification course is an eight-week course that throws light on the various aspects of creating robust, stable, and aesthetically pleasing architecture. It highlights the importance of the factors to be considered while designing architecture. This AICTE-approved FDP course falls under the architecture and planning domain. 

The Structure, Form, and Architecture curriculum is designed to satisfy the academic needs of both undergraduate and postgraduate students. Professor Shubhajit Sadhukhan, an assistant professor in the Department of Architecture and amp, IIT Roorkee, offers the training. He has several publications in reputed international journals under his name. 

Moreover, the Structure, Form and Architecture online training will touch upon the basic concepts of structural forms, the properties of the materials used and the pros and cons of choosing specific architectural forms. Learners are also introduced to relevant case studies from across the world, along with a few study model experiments for enhanced conceptual understanding.

The Contemporary Architecture and Design online course offered by Swayam, an initiative by the education ministry of the Indian government. The course will teach students about the historical context and current architectural trends and discusses primary stages of modernism, contemporary architecture, and postmodernism.

The Contemporary Architecture and Design training briefly discusses key characteristics with examples of both stages of modern architecture. For a more comprehensive understanding, these periods of the architectural model of philosophy will be expanded into the domains of fine arts and visual design. The contemporary Architecture and Design syllabus will assist students in developing critical thinking skills related to architectural appreciation as well as developing design vocabulary.

The Contemporary Architecture and Design training covers various Post-Modern Architecture's Stages, Master architects' works from the modern period. The course also offers participants a government-recognized certificate through Swayam. Students must register and take the course provider's proctored in-person test at one of the certified testing centres, which costs Rs 1,000.

The Culturally Responsive Built Environments online course is an 8 weeks program provided by Swayam, an initiative by the Ministry of Education of the Indian government. The goal of this course is to present cultural discourse theory, practice, education, and research in the built environment. 

The Culturally Responsive Built Environments training aims to lay the groundwork and re-orient learners to apply interdisciplinary and systems thinking approaches for putting together the ecological, scientific, technical, and political elements of the topic of the culturally relevant living environment under one roof.

The Culturally Responsive Built Environments syllabus includes culture risk and disaster, practices and principles of conservation, cultural economies, social change, architectural education, winter urbanism, etc.

The 8 weeks Housing Policy & Planning online course is offered by Swayam. For a long time, the Government of India has prioritized ‘Housing for All.' It has developed the Housing for All mission, which includes a sub-mission centred on ‘technology' to improve social housing delivery. The government has also been working to create an enabling environment for private companies by implementing changes in the land and finance sectors in order to boost the total housing supply.

As a result, the housing market is always changing. The Housing Policy & Planning training teaches about new conditions which helps academics and practitioners to deliver in the field of housing projects without a solid understanding of the rapidly changing housing planning practice and policy dynamics.

The Housing Policy & Planning syllabus includes current housing land and policy reforms, planning, and strategic intervention at the municipal and sub-regional levels. The program is highly engaging and full of best practices and important cases, as well as course resources that are extremely valuable for students at the bachelor's, master's, and Ph.D. levels, academics, professionals/consultants, and policymakers at all levels.

The movements of a physical body can be measured by using the study of kinematics and dynamics where it can use all the relative terms of acceleration and motion. The course itself is designed for the aspirants who are interested in motion study and its interesting learning to make their career placed in their interested wing. With this type of programme, the learner can learn Multibody Dynamics and Motion study.

In this engaging world with all the physics and its applications, people may be interested to know how this all happens and the answer arises from Skill Lync academy through many demonstrations and practical knowledge. Learnings from the practical knowledge are applicable anywhere and there the main strategy of Skill Lync academy arises. However, the student's capabilities and performances are raised with conceptual learnings.

Skill Lync generates future engineers with probable practical knowledge by partnering with industrial experts. The academy has a professional and deep knowledgeable faculty who fills creativity in students. The conceptual study by this academy differs from any other academy. The required support is ensured by the academy by enrolling in the course. Therefore this academy becomes the reason for student’s dreams and achieves higher.

Under the guidance of the Ministry of Human Resource Development and NPTEL, Swayam is offering the course of plant cell bioprocessing. The course is a 100 percent online course. The duration for this course is 8 weeks and it is an undergraduate-level course. 

The course of plant cell bioprocessing is a government certified course and is taught by the experts free of cost. After completing this programme, candidates will learn about identifying industrial applications of Tissue Culture Technology and Plant Cell technology.

The candidate can receive certification for this course after they pay a fee as per the guidelines of the Swayam platform. The course of plant cell bioprocessing is highly recommended to students and researchers in the field of biotechnology, biochemical, plant biotechnology and bioprocess engineering. This course can give career support if studied with concentration and consistency.  The course provides industry support to various companies and firms in the field like Dabur, Himalaya private limited. 

The online Bioengineering: An Interface with Biology and Medicine certification benefits the registered students as the course offers a  basic biology course for all the first-year students with an engineering background.  The Bioengineering: An Interface with Biology and Medicine certification syllabus would be covering and providing the applicants with the basic and fundamental concepts of biology. The course has been structured to help the candidates study fundamental concepts of bioengineering. 

The eight-week program will be covering the fundamental concepts that are related to the topics - Chromosomal basis of inheritance, Clinician’s perspective, Classical genetics experiments, Chromosomal disorders, Bacteria and viruses, Linkage. Upon completing the online course the students will have their skills developed in the genre of cloning. The applications that the students will be learning in the given course can be applied by the students in the professional fields. The core concepts of genetics and its applications will be learned by the students in the program.

The Biointerface Engineering training programme is an 8-week course curated by IIT Guwahati. It falls under the Bioengineering and Biological Sciences and Bioengineering category. Both undergraduate and postgraduate-level students can take the course, and they must either have or be pursuing a Bachelor’s degree in any engineering discipline.

The Biointerface Engineering online course aims to introduce a chemical approach to biomedical products and applications. Several vital topics in surface chemistry will be covered, like interactions with biomacromolecules and the role interfacial phenomena play in the behaviour of surface biomolecules. Professor Lalit M. Pandey,  a reputed course instructor from IIT Guwahati, teaches the programme. 

The Biointerface Engineering certificate programme is an online course. Plenty of video tutorials, study and reference material are available to the candidates completely free of cost. The candidates will have access to graded tests and assignments and can also sit for an end-term examination to get certified.

IIT Madras has curated the Bioreactor Design and Analysis online program. It is a core program intended for both undergraduate and postgraduate-level students. The course falls under the category of Bioprocesses and Biological sciences, and bioengineering. It is an FDP course and has plenty of industry support from biotechnology-based and fermentation industries. 

Taught by eminent faculty of IIT Madras, Professor Smita Srivastava, the Bioreactor Design and Analysis training has been designed to help interested students understand the topics under bioprocess or biological engineering. Students will be introduced to different bioreactor designs, topics like scale-up of bioprocesses and non-ideality in bioreactors. Discussions will also be held on the heat transfer and mass requirements for a given fermentation system. 

The Bioreactor Design and Analysis course by Swayam extends for eight weeks and is rife with video tutorials and study materials. Swayam also provides enough reference material for the candidates to consult during the course. Graded tests and assignments are also available for self-assessment. There will also be an end-term certification exam.

Ever wondered what biomaterial is? It refers to any material that is synthetic or natural, which replaces a particular body part. Over the years, biomaterial has been lauded for improving human health and bringing back the function of a living organ or tissue. The Medical Biomaterials course by Swayam dives deep into its functionalities and benefits. 

Besides, the Medical Biomaterials certification syllabus covers vital concepts like the history of biomaterials, mechanical properties, restorability, analytical instruments, classifications, applications, drug delivery systems, and the like. The course curriculum also discusses how the material is biocompatible and does not cause any adverse reaction to the host.  

Taught by Prof. Mukesh Doble from the prestigious IIT Madras, the Medical Biomaterials online course is excellent for candidates who have pursued UG/PG in Biotech or research scientists in biotechnology, metallurgy, material science, along with dentists, clinicians, and the like. Interested candidates will also benefit from acquiring the program certificates in acing their recruitment rounds.