Page 5 - List of all Courses & Certifications - Eligibility, Fees, Duration, Career Options

Offered by

IIT Roorkee via Swayam +1

Certificate

Mechanical Measurement Systems

The Mechanical Measurement Systems program is a core course designed by IIT Roorkee. This program is an undergraduate and postgraduate-level course under the category of mechanical engineering and will be conducted over eight weeks. Prof Ravi Kumar from IIT Roorkee will be instructing the course.

The Mechanical Measurement Systems certification offers necessary information about statistical analysis of experimental data and mechanical measurement systems. The course introduces general functional and configuration elements of measuring systems. Candidates will also learn about the dynamic and static features of measuring instruments. Instrumentation of strain, torque, velocity, displacement, flow, sound, temperature, and flow measurements is also covered.

The Mechanical Measurement Systems training is spread over forty lectures which are approximately 30 minutes long. Candidates will have to answer practice assignments throughout the course and submit them for revaluation. There will be a final exam conducted for the e-certificate, and the interested candidates can appear for the same.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Mechatronics

The Mechatronics online course is an eight-week elective training. It is structured by IIT Roorkee with NPTEL approval and run by MHRT. The course is spread over forty 30-minute lectures and will be conducted by Prof Pushparaj Mani Pathak. Candidates will be given practice assignments throughout the course, and the ones interested can also answer the exam for the certificate.

Mechatronics training discusses mechanical engineering’s synergistic integration. This concept involves designing and manufacturing industrial processes and products with intelligent computer control and electronics. The students will learn about implementing electronic control and intelligent control in mechanical systems, especially to enhance their design and performance.

The Mechatronics certification syllabus includes mechanisms and actuators, signal conditioning, transducers and sensors, microcontrollers and microprocessors, system response and modeling, and design and mechatronics. The course has no prerequisites and is well-suited for UG or PG students in mechanical, electrical, and electronic engineering

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Processing of Polymers and Polymer Composites

Curated by IIT Roorkee, the Processing of Polymers and Polymer Composites programme classifies engineering materials and processes to produce polymers. From the initial to secondary processing stages, learners will know the challenges and opportunities linked as well. This AICTE-approved FDP curriculum aims at a postgraduate level of study by covering topics usually left out in undergraduate studies of polymer manufacturing.

The Processing of Polymers and Polymer Composites certification syllabus is spread across eight weeks. The concepts covered during this core programme include extrusion, thermoforming, compression, injection moulding, and transfer moulding. Course-takers will also solve numerical problems, submit assignments, and review case studies throughout the study.

Professor Inderdeep Singh from the Industrial Engineering and Mechanical Engineering department at IIT Roorkee mentors the learners. By paying an examination fee, students can sit for the certifying test. The Processing of Polymers and Polymer Composites certification requires learners to secure the minimum marks mentioned for the average assignment and proctored test scores.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Modelling and Simulation of Dynamic Systems

The Modelling and Simulation of Dynamic Systems certification course are spread over eight weeks and explains how the usefulness of the model depends on its ability to capture important physical features. The students here can highly benefit from the expertise of their course instructor, Dr. P M Pathak. They are a professor of the Mechanical and Industrial Engineering Department at IIT Roorkee.

The Modelling and Simulation of Dynamic Systems program is an AICTE-approved FDP course. Moreover, it falls under the domain of mechanical engineering and suits the needs of both undergraduate and postgraduate students alike. Learners are offered the practical experience of running simulations and solving the resulting equations.

The Modelling and Simulation of Dynamic Systems certification syllabus include various concepts ranging from system transfer functions and simulation to parameter estimation and state-space formulation. Besides, candidates can also acquire highly reputed accreditation. The e-certificate contains the student’s name, photograph along with the final score, and logos of NPTEL and IIT Roorkee.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Steam and Gas Power Systems

The Steam and Gas Power Systems program is an online certificate course under the discipline of mechanical engineering. The Indian Institute of Technology, Roorkee, has designed the course with the instructor, Prof Ravi Kumar. The Ministry of Human Resources, Govt. of India runs the program under NPTEL and AICTE.

The Steam and Gas Power Systems training revolves around applied thermodynamics. This includes the Rankine cycle, boilers, and high-pressure boilers, their performance, fuel combustion in boilers, steam flow through the nozzles. Candidates will also learn about steam turbines along with impulse reaction and gas turbines, axial and centrifugal compressors, and jet propulsion.

Moreover, the Steam and Gas Power Systems certification uses numerical to solve various problems to understand the course content better. This 8-week course is spread over 40 lectures, which are around 30 minutes in duration. Candidates can answer in-course assignments and appear for the final exam to receive the course certificate.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Surface Engineering of Nanomaterials

The Surface Engineering of Nanomaterials certification course is scheduled for eight weeks and falls under Metallurgy, Material Science, and Mining Engineering. The study’s main objective is to enhance the performance capabilities of nanomaterials when used with some matrix. This can be achieved by modifying the properties of the surface.

The Surface Engineering of Nanomaterials online training deals with solid surfaces and how their modifications result in various applications with improved electrical and thermal properties. The AICTE has also approved this elective FDP course. It covers multiple concepts from microencapsulation, the kinetics of release and plating to deposition, surface modification methods, and chemical vapor deposition.

The Surface Engineering of Nanomaterials certification curriculum has been designed so that the academic requirements of both undergraduate and postgraduate students are catered to. Moreover, the course is offered by Professor Kaushik Pal, an associate professor in the Department of Industrial and Mechanical Engineering.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam

Certificate

Thermo-Mechanical And Thermo-Chemical Processes

The course on ‘Thermo-Mechanical And Thermo-Chemical Processes’ is a National Program for Technology Enhanced Learning(NPTEL) online course developed and offered by the Indian Institute of Technology Roorkee. This online course on thermo-mechanical and chemical processes is provided on the Swayam online education portal.

The course study of this online training is about microstructural aspects and the processes involved in thermo-mechanical or thermo-chemical treatments for the students and graduates of engineering, specifically in the domain of metallurgy, materials engineering or and the professionals in the aluminum and steel industry. This is an elective course that will be conducted for eight weeks by the course educators, Dr. Vivek Pancholi and Dr. Sai Ramudu, professors from the department of metallurgical and materials engineering at IIT Roorkee.

The ‘Thermo-Mechanical And Thermo-Chemical Processes’ training program is an undergraduate or postgraduate level course belonging to the Metallurgy and Material science & Mining Engineering division and it provides the students with two credits and a certificate after completion of the course.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Chemistry Knowledge of engineering Knowledge of Metallurgy

Offered by

IIT Roorkee via Swayam +1

Certificate

Supply Chain Analytics

The Supply Chain Analytics certification course proves exceptionally beneficial in the current era of supreme global competition. The course throws light on the crucial aspects that will enable students to understand how to bring better quality and service at lower prices and increase customer demand. This program falls under the shared domain of management studies and operations.

The Supply Chain Analytics certification syllabus perfectly suits the academic requirements of both undergraduate and postgraduate students. Moreover, this FDP course has also been approved by the AICTE. Professor Rajat Agrawal, an associate professor of the Department of Management Studies at IIT Roorkee, offers the course training. He has guided thirteen Ph.D. thesis papers related to operations and has also published several international journal articles.

The Supply Chain Analytics online program is scheduled for eight weeks and makes sure that the curriculum is comprehensively covered. Students are presented with the opportunity to utilize analytics to bring greater functionality to the supply chains.

8 Weeks

₹ Free

Compare

Skills Covered:

Business analytics knowledge Supply Management

Offered by

IIT Roorkee via Swayam +1

Certificate

Robotics and Control: Theory and Practice

The innovation in robotics and applications has led to a rising stimulation of interest amongst teachers and students of engineering. IIT Roorkee and Swayam have created the Robotics and Control: Theory and Practice certification course to offer students the opportunity to learn more about this growing field and build a career in robotics research. You will learn about modelling, control and planning.

The Robotics and Control: Theory and Practice syllabus by IIT Roorkee is taught over eight weeks. It is divided into two parts. The first part on fundamentals of robotics discusses topics like homogeneous transformations, DH algorithm, rotation. The second part on applications of robotics includes topics like exoskeleton and robotic needles.

The Robotics and Control: Theory and Practice by Swayam is an eight-week course with verification from AICTE as an FDP course. IIT Roorkee’s top professors from the Departments of Mathematics and Electrical Engineering will be leading this online program. Candidates will receive eight graded assignments. In the end, there will be two exams for those who want to receive the certificate.

8 Weeks

₹ Free

Compare

Skills Covered:

Robotic skills

Offered by

IIT Roorkee via Swayam +1

Certificate

Augmenting Design Thinking with Human-Computer Interaction

8 Weeks

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Biological Process Design for Wastewater Treatment

8 Weeks

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Engineering Architectural Graphics Part I - Orthographic projection

8 Weeks

₹ Free

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Facts Devices

8 Weeks

₹ Free

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Group Dynamics

8 Weeks

₹ Free

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Principles and Applications of Building Science

Principles and Applications of Building Science certification is an AICTE approved course that is conducted for a period of 4 weeks. It is held on the Swayam platform by two renowned institutions IIT Roorkee, and NPTEL. Both the construction and design professionals need command over the fundamental principles in the building of physics for ensuring efficiency functionally in already built environments. Hence this course is ideal for providing a holistic solution for professionals to understand the disciplines of architecture and engineering for understanding the practical application of these principles.

Principles and Applications of Building Science training will make the participants engage in a series of learning which is experiential, and in the modules, the candidates will go through basic tutorials, and animated examples with the inclusion of case studies that can be applied, and also some self-done exercises. The end certificate will help those in the design and construction engineering firms.

4 Weeks

₹ Free

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Engineering/Architectural Graphics – part II – Isometric and Axonometric Drawings

4 Weeks

₹ Free

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Product Design and Development

Product Design and Development certification is 4 weeks long and is conducted by 3 institutions namely Swayam, NPTEL, and IIT Roorkee in conjunction with each other. It has been worldwide established that economies that are successful are based on creativity, which is led by entrepreneurship. Thus the course has a primary objective which is providing help to both the job seekers and creators who can conceptualize and create the design and development of products that are new.

Product Design and Development training help in the identification of the need for new products, product design processes, product life cycle, and finally the development of these products by creating prototypes. Candidates can understand the various product design tools like DFM, CAD, DFA, and more along with principles in product design, with the help of different examples, and case studies. Also, through this certification course, the participants can understand the fundamental concepts related to Rapid Prototyping techniques.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Product Management

Offered by

IIT Roorkee via Swayam +1

Certificate

Sociology of Science

The ‘Sociology of Science’ online certification course is developed for the students of undergraduate and postgraduate level and is focused on delivering insights on sociological aspects and cultural influence with respect to science and technological developments. The online course is provided by the Swayam online education portal an initiative of the government of India with the National Programme on Technology Enhanced Learning (NPTEL). In this elective program, the course classes are conducted online for a period of four weeks.

The instructor for this certification program is Dr. Anindya J. Mishra who is an associate professor of the department of the humanities and social sciences at the Indian Institute of Technology Roorkee.

The ‘Sociology of Science’ certification course enables the students to receive a course certificate and course credits after finishing the training and assessments successfully. This online program is approved by the All India Council for Technical Education and helps the students gain conceptual knowledge with practical understanding.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of science Knowledge of Sociology

Offered by

IIT Roorkee via Swayam +1

Certificate

User Interface Design

User Interface Design programme is an AICTE approved Faculty Development Programme or FDP course. In this course, you will learn about various aspects of user interface design, with special attention given to virtual media platforms. This programme was designed keeping in mind the emerging paradigm of human-machine interaction in the industrial design pedagogy.

In the User Interface Design certification course, you will understand the user experience and cognition, using contemporary technology like eye tracking, and learn to design a user interface using a methodological approach. Professor Saptarshi Kolay has developed the course curriculum from IIT Roorkee in association with NPTEL.

User Interface Design training is an undergraduate/postgraduate programme in the field of Architecture and Planning. It is a four-week online course delivered through live instructor-led sessions. There is no enrollment fee to join the course. You can also take advantage of the optional exam to secure a course completion certification from this course.

4 Weeks

₹ Free

Compare

Skills Covered:

Designing skills

Offered by

IIT Roorkee via Swayam +1

Certificate

Plant Developmental Biology

4 Weeks

₹ Free

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Biomedical nanotechnology

Biomedical nanotechnology certification is a course that is the brainchild of NPTEL and IIT Roorkee. This certificate course is taught for around 4 weeks, and its level is undergraduate or postgraduate with one credit point being offered. Biomedical nanotechnology is a fast-developing field that includes a huge collection of disciplines. Also, the application of nanotechnology is gaining a massive response in nearly all fields mainly in the healthcare sector.

Biomedical nanotechnology training has been fruitful in the diagnosis, and therapy of cancer, tissue engineering, medical implants, and much more areas. This course is teaching that in the years to come, more developments in this sector are termed to flourish and help in the development of the latest life-saving treatment using medical technologies. So, with this course, every participant gains applicational knowledge of nanotechnology.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Nano technology

Offered by

IIT Roorkee via Swayam +1

Certificate

MCDM Techniques Using R

Everyone wants to make the best possible decisions that will lead to favourable outcomes, both in their personal and professional capacity. Hence, IIT Roorkee has designed the MCDM Techniques Using R online course to train candidates in the various tools, concepts, and techniques required for practical decision-making.

The MCDM Techniques Using R certification course provides a solid foundation in advanced decision-making and problem-solving. During this four-week training, you will learn to use the most popular statistical platforms like R and MATLAB and utilise them for making decisions. After providing an overview of decision-making concepts, the course will focus on MCDM techniques.

The MCDM Techniques Using R training runs for four weeks, and AICTE has approved this as a Faculty Development Program. The course level is undergraduate/ postgraduate. Moreover, this program also has industry support and the option to sit for a paid certification exam. Thus, candidates will get the opportunity to become certified professionals in this field.

4 Weeks

₹ Free

Compare

Skills Covered:

Mathematical skill

Offered by

IIT Roorkee via Swayam +1

Certificate

Business Analytics & Data Mining Modeling Using R Part II

Business Analytics & Data Mining Modeling Using R Part II certification is a 4 weeks elective course. This course has been jointly made, and presented on the Swayam platform by NPTEL and IIT Roorkee. Also, this course is an FDP course that comes approved by the All India Council of Technical Education. Falling under the management category this course helps in deriving organizational goals, and business intelligence. These goals are usually achieved by making use of data mining techniques.

Business Analytics & Data Mining Modeling Using R Part II training teaches the use of the statistical software R for building, assessing, and even comparing models that are based on realistic datasets and cases that follow an easy learning process, and curve. This course is useful for freshers or experienced candidates in all sectors of a business. The course is completely free, but the certificate acquiring process has to be done by participants paying some fee, and then passing a final exam.

4 Weeks

₹ Free

Compare

Skills Covered:

Business analytics knowledge R Programming Knowledge of Data mining

Offered by

IIT Roorkee via Swayam +1

Certificate

Unit Operations of Particulate Matter

Today, about 75% of the chemical manufacturing processes involve particulate matter. This includes the manufacturing of items like cement, pharmaceuticals, ceramic, pigments, and catalysts. The Unit Operations of Particulate Matter will provide end-to-end details of the important physical mechanisms that can make all the difference between failure and success.

The Unit Operations of Particulate Matter course deals with the Science and Technology of solid materials by taking a multidisciplinary approach. The training includes fields like Environmental Agricultural, Biomedical, Materials Science, Aerospace, Microbiology, Chemistry, Cell Science, and Pharmacy. The curriculum consists of ten modules that are taken up in a total of four weeks.

For the Unit Operations of Particulate Matter programme, Shabina Khanam, who is an Associate Professor in IIT Roorkee’s Department of Chemical Engineering, conducts the lectures or video tutorials. This online certification course is free, and anyone can enrol in this course to gain knowledge about solid materials and their processes.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics

Offered by

IIT Roorkee via Swayam +1

Certificate

Equipment Design Mechanical Aspects

The Equipment Design – Mechanical Aspects online programme spans four weeks, allowing you to cover core subject topics swiftly. It is an online course hosted by Swayam and approved by AICTE. As such, it receives industry support from all chemical process plants.

Equipment Design – Mechanical Aspects certification syllabus will primarily focus on important chemical plant equipment, including evaporators, absorbers, reactors, etc. You will understand all the equipment designs in-depth and from a mechanical POV.

Through weekly assignments and live classes conducted by an expert faculty, you will learn how different types of stress and strains impact mechanical designs in the Equipment Design – Mechanical Aspects course. Additional reference and reading materials will also be available to you for holistic learning.

Swayam provides an online forum as well to foster healthy discussions between students and course instructors. You can also clear your doubts if any. After successful course completion, you can apply for the proctored exam and earn the Equipment Design – Mechanical Aspects certificate.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

GPS Surveying

GPS Surveying is a collective term for all the different operations involved in the collection of data using GPS. As GPS is becoming increasingly popular as the primary tool for collecting geospatial data, there is a great demand for knowledgeable GPS surveying personnel.

The objective of the GPS Surveying online course by Swayam is to make participants capable of carrying out GPS surveying, independently and confidently. As it is a field-oriented programme, students and professionals from any field, interested in GPS surveying, can attend this course. However, candidates should preferably have some basic understanding of physics and mathematics and a working knowledge of computers.

The GPS Surveying programme comprises lectures on theoretical aspects, and video demonstrations of instruments and their working, field surveying, and data processing. Participants will have to solve an assignment at the end of each module. The type of questions may differ from MCQs and fill in the blanks to subjective questions, as relevant to the module.

4 Weeks

₹ Free

Compare

Skills Covered:

Data Sorting

Offered by

IIT Roorkee via Swayam +1

Certificate

Global Navigation Satellite Systems And Applications

Global Navigation Satellite Systems And Applications certification is a 4 weeks programme proposed by NPTEL and IIT Roorkee and is launched on the Swayam provider website. This is an elective course falling under the course category of civil engineering. The course is absolutely free to learn but the certification demands extra thousand rupees.

Global Navigation Satellite Systems And Applications training provides a solid understanding of the DEMs which are the digital elevation models, and their applications in earth sciences, and civil engineering. Later on, in the course curriculum, the candidates can identify their source, derivatives, generation techniques, errors, and limitations of the DEMs. The industry support for this certification course is offered by some Geoinformatics companies, like NIIT, Leica Geoinformatics, ESRI India, MapmyIndia, ISRO, and more.

4 Weeks

₹ Free

Compare

Skills Covered:

Civil Engineering skills

Offered by

IIT Roorkee via Swayam +1

Certificate

Visual Communication Design for Digital Media

The ‘Visual Communication Design for Digital Media’ online course is designed for the students to discuss the various patterns and applications of new media. The implementation of the visual communication design strategies is the integration of human-computer interaction design, animation design, and graphic design in digital media. This certification program is provided by the online educational platform, Swayam in association with the National Programme on Technology Enhanced Learning (NPTEL) for a duration of four weeks.

The program faculty is an industrial and academically qualified professional from the Indian Institute of Technology Roorkee belonging to the department of architecture and planning, assistant professor, Prof. Saptarshi Kolay.

The ‘Visual Communication Design for Digital Media’ online certification course enables students to receive the virtual experience of learning aided with books, references, and other online resources. This elective program is for postgraduate level students and it equips them with a course certificate and one credit point after completing the course study.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of UI Designing skills Design thinking Rapid prototyping

Offered by

IIT Roorkee via Swayam

Certificate

Optical Sensors

Swayam’s Optical Sensors online course is an elective, four-week curriculum dealing with optical biosensors and their introductory working fundamentals. Developed in collaboration with IIT Roorkee, this program is set at PG/UG-level and belongs to the ‘Photonics’ and Electrical and Electronics Engineering categories. The entire training features weekly modules, evaluations, optional exams, and term-end notes for research.

The Optical Sensors certification syllabus commences with the elementary components, performance parameters, characteristics, etc. It then proceeds with optical phenomena, sensing applications, tissues’ optical properties, biomaterials’ optics, and more. Through an extensive curriculum, the course familiarises candidates with the mesmerizing sphere of optics principles-based sensors. In doing so, it also helps them gain industry-relevant skills to pursue career growth in this domain.

While a basic optics experience is enough to join this training, students must complete all in-course assessments and register for Swayam’s offline test (proctored) to acquire the Optical Sensors certificate. This will further help them display their skills and seek lucrative job opportunities in Photonic Sys and related organizations.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics

Offered by

IIT Roorkee via Swayam

Certificate

Basics of software defined Radios and Practical Applications

Basics of software-defined Radios and Practical Applications is a 4 weeks programme that is a joint initiative of NPTEL and IIT Roorkee. This course offers an electronic copy of the certificate for its participants. The course teaches that SDR is a very important part of modern communication where processes used for hardware implementation are defined using the domain of software regarding flexibility.

Basics of software-defined Radios and Practical Applications training are used for providing the description of the several components of software-defined radios along with their significance, and relevance. The participants shall also understand the interrelationship between digital, and analog power processing and spectrum transmission of signals. At the final stage of this course, candidates will understand what kind of term solutions are used for industrial datasheets, and the motivation for appropriate transceiver design.

4 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Exams

Colleges

Predictors

Resources

Quick links

Exams

Colleges & Courses

Predictors

Resources

Exams

Colleges

Predictors & E-Books

Resources

Engineering Preparation

Medical Preparation

Law Preparation

MBA Preparation

Exams

Colleges

Resources

Exams

Colleges

Predictors & Articles

Resources

Exams

Colleges

Predictors

Resources

Exams

Colleges

Upcoming Events

Resources

Exams

Colleges

Resources

Quick Links

Top Streams

Specializations

Resources

Top Providers

Exams

Colleges

Resources

Diploma Colleges

Exams

Colleges

Resources

Exams

Resources

Top Courses & Careers

Colleges

Exams

Upcoming Events

Resources

Other Exams

Exams

Colleges

Top Countries

Resources

Exams

Top Schools

Products & Resources

NCERT Study Material

Popular Searches

List of Online Courses and Certifications

Credential

Course Type

By Date

Provider

Duration

mode of Study

Degree

Course Fee

Pricing

Payment Options

Course Level

Certificate availability

Financial AID

Language

Which credential are you looking for?