Online Engineering And Architecture Courses & Certifications

The course on Power System Engineering certification has been formulated especially for the third-year students who are in their undergraduate course and pursuing a degree in electrical engineering. The registered students will be provided with the fundamental concepts and the principal theories that are applicable to the field of electrical power system engineering. In the online course on  Power System Engineering by Swayam the concepts that will be covered will be - transient overvoltages, underground cables, insulation coordination, and overhead line insulators detail. Furthermore, the Power System Engineering certification syllabus will also be covering the principles of- sag, corona, and tension of transmission line. After completing the online course the students will develop higher-level skills in the domain of electrical power systems and will also be learning about the unit commitment method. The students will also have their skills increased in the subject of transient overvoltages and insulation coordination.

The Principles of Digital Communications program is a course curated by IIT Delhi, under the categories electrical, electronic, and telecommunications, and Communication and signal processing. It is an undergraduate-level course that aims to introduce to the students the underlying basic principles for the designing and analysis of a digital communication system. It is a 12-week elective course with industry support from the telecommunication industry. 

Digital communication systems form an integral part of all modern communication systems. The candidates who participate in Swayam’s Principles of Digital Communications training will develop a basic understanding of the system design goals. Participants also learn how to optimize the trade-off among basic system parameters like bandwidth and signal-to-noise ratio. 

The Principles of Digital Communications course by Swayam begins with an elaborate introduction to digital communications and builds up from a few basic concepts to different topics and theories involved in the topic. This online FDP, approved by AICTE, is rife with video tutorials and references which are also available online. For obtaining an e-certificate post-completion, finishing assignments, and clearing the assessments are compulsory.

The session on Nonlinear System analysis online course will be dealing with the detailed analysis of nonlinear systems and their applications. The enrolled candidates will be analysing the need for the requirements for the special tools that are using the nonlinear system. 

The basic principles of superposition on which linear analysis is based will also be discussed in the Nonlinear System analysis by Swayam online course. The session will be providing the students with professional exposure to the various tools for analyzing the behaviour of- culminating in the stability analysis and the nonlinear system which are of paramount importance in the control systems. 

The Nonlinear System analysis certification syllabus will be dealing with the key concepts of - Limit cycles, OEDs, Nonlinear circuits - limit cycles,  Non-linearities, KYP lemma, Bifurcations, Biological transcriptional system, PR systems, Equilibrium points and other topics that are related directly and indirectly with the concept of “nonlinear system analysis”.

The Principles of Industrial Engineering program by Swayam aims to train its candidate in the different aspects of industrial engineering and its relevance in the industrial environment. It is a 12-week program curated by IIT Roorkee and is offered at an undergraduate level. This core course falls under the mechanical engineering and manufacturing processes and technology category. 

Designed to exclusively benefit engineering students and professionals in mechanical engineering, the Principles of Industrial Engineering training has been carefully curated by the reputed faculty of IIT Roorkee. It aims to familiarise candidates with all the different concepts and techniques related to the subject with the help of case studies. 

The Principles of Industrial Engineering course is an online program, rife with video tutorials and in-course assignments. A certificate will be awarded to eligible candidates upon completing the course and the end-term examination. Swayam offers plenty of study material and effective learning modes to ensure a wholesome learning opportunity for candidates who choose to participate in the program. 

The course on Nonlinear Vibration by Swayam has been structured as a simulation based session where one can visualize the response of the different mechanical systems available, along with the different resonance responses provided. The entire programme has been divided into nine modules and out of the nine modules, the first eight modules are framed on the- various equations of motion available, it also provides the solutions of the procedure to solve the various equations and their application in the daily world. 

The eight modules i.e. the last module will be covered over a course of three weeks where the applicants will be provided with three different applications that are related to the projects that will be provided to the students in the practical classes. The Nonlinear Vibration certification benefits is for the students who want to secure a career in the field of manufacturing and aerospace.

The Offshore Structures Under Special Environmental Loads Including Fire Resistance certification course is a postgraduate level of programme which deals in the offshore structures of and their behaviour under different circumstances. Candidates who get into this course will be able to learn about the behaviour of offshore structures when an earthquake occurs, analysis of methods, curved beams, chain links, etc. Candidates also get to use the MATLAB program for computing numerous environmental issues and they can use MATLAB coding to analyse the problems. The course provides full control to the students for completing the Offshore Structures Under Special Environmental Loads Including Fire Resistance certification syllabus or joining or leaving the sessions anytime. 

This course is absolutely free and requires no registration process to get into the course. The Offshore Structures Under Special Environmental Loads Including Fire Resistance programme also makes certification available for the students so that they get benefited from the same. Although the certification comes at a price of the quoted amount which is given on the website, it is totally an optional choice for the students. If the candidate wants to be certified for this course he or she will have to give an offline exam. The course will be available for the students every time and the expected time to complete the course is 12 weeks. Since the Offshore Structures Under Special Environmental Loads Including Fire Resistance online course is available to the students all the time, candidates can learn from the course according to their own requirements.

Curated by IIT Guwahati, the Principles of Mechanical Measurement program is a 12-week course intended mainly for engineering students and professionals. The course falls under the Mechanical engineering category and is an undergraduate-level program. Due to the significance of measurement in engineering, the training is expected to have some level of industry support from any engineering firm or a related industry. 

Measurement and proper interpretation of an engineering task or experiment are of paramount importance. The Principles of Mechanical Measurement training introduces the participants to the fundamentals of measurement through discussions on terminologies and relevant concepts. The course will prepare a mathematical background for the candidates, which will help them understand and analyze the various measurement devices, and there will be a pertinent discussion on digitalization. 

The Principles of Mechanical Measurement certification course is a core course designed to impart a fundamental idea about measurement and its applications right from the basics. The candidates also get the opportunity to qualify for a Swayam e-certificate. However, they must complete all the course lectures and graded assignments and secure the required marks in the internal and end-term examinations.

The Oil Hydraulics And Pneumatics certification course is designed for engineering students who are interested in the subject of fluid power. This is an AICTE approved course which is provided by the Indian Institute of Technology, Madras. The course covers topics such as hydrostatic, hydraulic fluids and pumps, etc. The Oil Hydraulics And Pneumatics training provides access to the course to its students throughout the year as it is available all the time on the website. The course is provided by the platform of Swayam which is a government-initiated platform that aims to give free education to the students in the online mode.

The Oil Hydraulics And Pneumatics programme also provides certification at the end of the candidate wishes to go through the process of a proctored exam by paying the exam fees. The course can be joined by the student anytime. Similarly, the candidate can leave the sessions according to his wish. The course is a self-paced course and can be completed at the given time of 3 months or according to the student's time. The Oil Hydraulics And Pneumatics certification course provides notes to the students through online video lectures, case studies, tests, discussion groups, and assignments.

The Principles of Signals and Systems training is verified by NPTEL and created by IIT Kanpur with Prof Aditya K. Jagannatham. The 12-week core course has been approved by AICTE and allows credit transfer to the institution you are enrolled in.

The Principles of Signals and Systems online course teaches about the foundation of current communication, digital signal processing, and control systems. Therefore, understanding these primary signal and system analysis principles is vital for ECE, EEE, and IE students. Basic signal and system analysis tools such as LTI systems, Fourier transform, DFT, DTFT, z-Transform, Laplace transform, and much more will be discussed over the course.

You will also become familiar with concepts such as causality, frequency or impulse response, convolution, and systems stability. The Principles of Signals and Systems program is appropriate for practicing engineers, UG or PG students, and managers who want to build a strong understanding of the field.

Intended for an electrical engineering audience, the Probability Foundations for Electrical Engineers certification by Swayam touches upon the fundamental aspects of the probability theory. Probability theory and its models play a significant part in various aspects of design and implementation, communications, networking applications and signal processing. 

Besides, the Probability Foundations for Electrical Engineers certification syllabus covers vital concepts of probability like conditional probability, continuous random variables, discrete random variables, variance, correlation, and the like. This AICTE approved course will require candidates to have basic calculus knowledge to better grasp the course. 

The Probability Foundations for Electrical Engineers online course is taught by eminent professor from IIT Madras Prof. Krishna Jagannathan who hails from the electrical engineering department. Although the course isn’t directly relevant to industries, it is a foundational path towards various other courses like Wireless/Digital communication, adaptive signal processing, and the like.

The Optical Communications certification course is a training which is meant for electrical engineering students. Participants who apply for this course get to know about optical communication and its latest developments that took place over the years in the industry. The programme is offered to the students by IIT, Kanpur. The course deals with the basic concepts as well as detailed concepts of the field. The course also includes the study of MATLAB models. The course belongs to the category of communication, electronics, and electrical engineering.

The Optical Communications online course offers its learning at no cost and with full study materials. The programme provides self paced training so that students have enough time to understand the concepts according to their willingness. The course provides a certificate to the students upon the successful completion of the programme if they qualify for the final exam with the given criteria.

Since the course is a self paced course, it can be completed with no time restrictions although the Optical Communications certification syllabus will be finished in 12 weeks by the mentor. Even after the completion of the programme, the notes and other study material will be accessible to the students. The course is absolutely free but the certification exam includes a cost of the quoted amount which needs to be paid as exam fees.

The Optical Fiber Sensors by Swayam will provide a basic to advance knowledge of optical sensors utility and its applications. This course will offer an in-depth study of optical sensors and their broad utility. The definition and functions of different types of sensors will be given in the course. Those sensors are- amplitude modulated sensors, phase-modulated sensors, wavelength modulated sensors, and polarization modulated sensors.

The course will help the economically weak participants to gain this advanced form of knowledge for free of cost. The candidates will learn in the digital mode. The course is verified by the Indian Institute of Technology Madras. The course also offers accreditations from NPTEL and AICTE. The course is offered by NPTEL on the Swayam platform. The course curriculum will be graded by assignments and the final exam.

The Optical Fiber Sensors certification will be offered in the e-certification form. It will have the logos of IIT Madras and NPTEL. The certification will help the candidates gain access to better professional benefits. It will also help the students to get academically recognised for such courses. 

The Process Control- Design, Analysis, and Assessment certification course trains students with all the necessary knowledge regarding tuning, stability, and controller concepts usually taught in a control class. This undergraduate course falls under the shared domain of chemical engineering, computational chemical engineering, and minor 2 in chemical. 

The Process Control- Design, Analysis, and Assessment training enables students to understand the MIMO control concepts at the most basic level for enhanced clarity of the process. Spread over 12 weeks, this course is taught by Professor Raghunathan Rengaswamy, who is currently working as a professor of the Department of Chemical Engineering at IIT Madras. 

The Process Control- Design, Analysis, and Assessment online course also enables students to obtain accreditation from one of India’s preeminent institutions, IIT Madras. The e-certificate will feature the name of the student, his/her photograph, the final score, and the logos of NPTEL and IIT Madras.

A chemical process plant is home to several industrial types of equipment like reactors, absorbers, distillation columns, evaporators, heat exchangers, and crystallizers, to name a few. The Process Equipment Design certification course enables the students to understand the design features of the various equipment used in chemical process plants.

The Process Equipment Design training gives students the chance to explore the complete design processes of condensers, heat exchangers, reboilers, evaporators, crystallizers, packed columns, and distillation columns. Further, the mechanical design structure of the distillation column is also introduced to the learners. 

Spread over twelve weeks, the Process Equipment Design online course is taught by Professor Shabina Khanam, who has published 29 and 24 research papers in reputed journals and conferences respectively. She is currently working as the Associate Professor of Chemical Engineering in IIT Roorkee. Besides, the students can also obtain a certificate that will have their name, photograph, final score, and the logos of NPTEL and IIT Roorkee.  

Sensors and Actuators program is an undergraduate and postgraduate level FDP course approved by the AICTE. The online course falls under the control and instrumentation domain which is a part of the broader category of electrical, electronics, and communication engineering. Designed by IISc Bangalore, this program will run for twelve weeks and equip students with knowledge on microtechnology and related topics.

The Sensors and Actuators certification by Swayam consists of a well-curated and comprehensive curriculum that focuses on sensors and actuators and their importance and function in the real world. Students can enroll for free in this interesting course that will consist of video lectures created for a thorough understanding of the subject. 

Furthermore, candidates can go through a list of texts referred to in the course by the instructor and prepare for the final exam. The proctored exam is held for those who wish to gain a Sensors and Actuators certificate to showcase their knowledge and accomplishment of completing the entire course. The training falls under the areas of control and instrumentation and electrical, electronics, and communications engineering.

Signals and Systems online course is a core program provided by Swayam in association with NPTEL for students at the undergraduate level. The course is offered and curated by the esteemed faculty of IISER Bhopal. Students will get a thorough understanding and will be introduced to the fundamentals of signal processing and systems analysis.

The Signals and Systems certification by Swayam is offered in the Hindi language, but the lectures will also use scientific terms in English. Basically, students will learn the concepts and their explanations in Hindi. Further, the course falls under three broad categories that include- 'Communication and Signal Processing'  ‘Electrical’, Electronics and Communications Engineering', and lastly, 'Control and Instrumentation'. 

The Signals and Systems certification syllabus will include continuous-time systems and signals and introduce students to the various types of signals and transformations. After finishing the twelve-week program, students can register for the proctored examination to obtain a soft copy of a certificate.

The Remote Sensing: Principles and Applications program is a 12-week study in remote sensing (RS) technologies. IIT Bombay has curated this elective course which falls under the ‘Civil Engineering’ purview. Learners can access video lectures and references to study the program. Set at an undergraduate/postgraduate level of study, the learning topics include RS sensors, image acquisition, and microwave radiometry.

By completing the Remote Sensing: Principles and Applications certification syllabus, students will pick up concepts such as spectral reflectance curves, radiometry, electromagnetic radiation, RS data acquisition, LIDAR, and data portals. Learners can complete the previous module and start with new topics for the next module. Moreover, the curriculum also familiarises aspirants with the ‘image interpretation’ concept.

Students will be rewarded with the Remote Sensing: Principles and Applications certification after completing the course modules and securing adequate scores in their assignments and final examination. This certificate will mention the candidate’s name, picture, marks, and logos of IIT Bombay and NPTEL. Professor Eswar Rajasekaran from IIT Bombay mentors this AICTE-approved Faculty Development Program (FDP).

Swayam’s Robotics: Basics and Selected Advanced Concepts certification course is a 12-week, elective learning programme, built to familiarise students with robotics’ introductory and advanced areas. The curriculum’s initial stages cover robotics’ introduction, its technology, offering a unified treatment for analysis and modeling of hybrid, parallel, and serial manipulators, using Denavit-Hartenberg’s parameters. Learners also study inverse and direct kinematics of parallel and serial robots, and their associated mobility and workspace concepts.

IISc Bangalore has curated the Robotics: Basics and Selected Advanced Concepts programme. It also uses hardware and experiments developed by the institute’s research students themselves. For a real-time hands-on experience, the course facilitates students to work on their hardware experiments and software simulations.

The Robotics: Basics and Selected Advanced Concepts certification syllabus continue with explaining velocity, Jacobian matrix, singularities’ concepts, linear control, model-based control, deriving motion equations via the Lagrangian matrix, and numerous other vital topics. Aspirants also learn about advanced areas like wheeled mobile robots’ analysis and modelling, cable-driven micro-robots, deployable structures, etc. Through all these, candidates become fluent in fully controlling robots and this subject’s higher-level concepts. Post-completion, they can also register to earn Swayam’s e-verified certificates. 

The Rock Engineering online course by Swayam is an introductory curriculum, dealing with how rock masses and rocks behave. This 12-week elective programme familiarises candidates with the design and analysis fundamentals of rock foundations, slopes, caverns, and tunnels. Industries that actively operate in mining and hilly terrain’s infrastructure development recognise this course. 

The Rock Engineering certification syllabus comprises critical topics like rock formations, rocks’ laboratory testing, strength criteria, analysing rock-slope stability, weak rocks’ foundation, geological data projects, tunnelling, etc. An AICTE-approved FDP course, this training is an IIT Roorkee offering, with Professor Priti Maheshwari as the instructor. The programme welcomes all learners currently pursuing their undergraduate degree, irrespective of which background they’re from. 

What’s more, the Rock Engineering programme also features an NPTEL and IIT Roorkee certification, enabling candidates to display their verified knowledge in this domain. Learners can opt for this by paying a certain fee, sitting for Swayam’s proctored evaluation, and scoring adequately in their 12 assignments throughout the curriculum.

Swayam and IIT Madras present the Rocket Propulsion certification course, an ongoing 12-week elective program specializing in rockets, rocket propulsion, and its modern trends. An undergraduate/postgraduate-level curriculum familiarises candidates with rockets’ fundamental aspects. The training describes motion in space, what rockets require to place space-crafts in various orbits, and escaping a planet’s gravitational field. 

The Rocket Propulsion certification syllabus then proceeds with teaching about a solid propellant’s design aspects, operating principles, liquid propellants, various other rocket types, etc. core topics. An AICTE-approved FDP curriculum, this course is targeted towards Ph.D./ME/BE/MSc aspirants. It requires no prior experience in this program’s domains, which are Propulsion and Aerospace Engineering. 

The Rocket Propulsion training also features recognition amongst HAL, DRDO, ISRO, Defense and Space-related industries, enabling course-takers to pursue employment in these sectors. To aid that, Swayam also offers a payable certification through their proctored tests and assignments. Clearing these, learners can obtain e-verifiable accreditation to boost their recruitment chances.

What makes the Soil-Structure Interaction program unique and compelling is that it discusses the details of the soil structure models in more detail than in any undergraduate degree courses. The course will explore the models for a shallow foundation under various subgrade characteristics and loading conditions. The training receives industry support from civil engineering companies.

Candidates enrolling for the Soil-Structure Interaction certification will learn about elastic foundation problems on beams and plates and using FDP methods to understand different foundation models. They will spend twelve weeks in this AICTE approved elective course in civil engineering and structural analysis. 

Soil-Structure Interaction is an online course available on the Swayam learning platform. The syllabus is designed by professor Kousik Deb from the Indian Institute of Technology, Kharagpur. He will also be the educator of the course. Candidates can either audit the course for free or opt for a certification. There are assignments and an end-of-the-term examination that they will have to successfully complete. 

Learners of the Spread Spectrum Communications and Jamming course by Swayam will understand the principles behind classic spread spectrum communications and code division multiple accesses. It is a Faculty Development Programme approved by AICTE. This elective course includes examples such as Global Positioning Systems (GPS) and other commercial application systems.

The topics listed in the Spread Spectrum Communications and Jamming certification syllabus include waveforms, Galois field maths, code acquisition, and tracking mechanisms, CDMAs, and MUD. The curriculum will explore MATLAB platforms, wireless cellular environments, and multiuser systems. Learners will be given access to video lectures, study references, and system examples. 

The study is developed by IIT Kharagpur and instructed by Professor Debarati Sen. It is recommended for learners to know digital communication and wireless communications. This 12-week online training comes with a Spread Spectrum Communications and Jamming certification. Candidates need to complete all learning modules, in-course assignments and write a proctored exam for the certificate.

Many practical signals used in day-to-day communication are completely random. Statistical signal processing strives to process these seemingly gibberish signals. This brand of study forms the backbone of contemporary communication systems and signal processing systems. To provide candidates with sufficient knowledge on the subject, Swayam has developed the Statistical Signal Processing training.

The Statistical Signal Processing online course explores the three main ingredients of statistical signal processing: Estimation theory, detection theory, and random signal modeling. All candidates require is an introductory-level understanding of probability. It is recommended that students take a basic probability course before enrolling in this program.

Statistical Signal Processing certification course, being a postgraduate level study, provides an in-depth understanding of various statistics and signal processing concepts. Swayam also grants a completion certificate after learners have passed the final test. The course is targeted towards UG and PG students who wish to learn the statistical aspects of signal processing.

The Transmission Lines and Electromagnetic Waves by Swayam online course focus on helping the candidates learn to write simple programs and visualize and experiment with them. The topics are analytical and computational. The analytical content will introduce the candidates to EM through transmission lines. Computational content will facilitate the visualization of the candidates. The concepts of EM will be taught broadly through transmission line theory. Practical learning will be emphasized by experimenting with codes. 

This course is initiated by the government of India. The Swayam platform offers NPTEL accredited courses verified by IITs. This course is verified by the Indian Institute of Technology Madras. The course provides re-certification. The course offers to bridge the gap between the advantaged and disadvantaged by providing them with quality education. It is an AICTE approved course.

The Transmission Lines and Electromagnetic Waves certification offers shareable flexibility. It will have logos of NPTEL and the Indian Institute of Technology Madras. The certification will specifically help master students and Ph.D. students in their academics. It will also profit the professionals in their work.

The quality of steel plays an enormous role in imparting specific characteristics of a product. The absence of any defects and cleanliness are the two significant facets of steel quality. Therefore, the Steel Quality certification course is developed to help you understand the importance of casting processes in the cleanliness and surface quality of steel. You will realize this by using two techniques as examples – Secondary refining and continuous casting. 

The Steel Quality program is provided by Swayam in collaboration with IIT Madras. This course, spanning over 12 weeks,  tackles many topics pertaining to steel quality, quality issues, how to control quality issues, and steel manufacturing. AICTE has approved the course as an FDP (Faculty Development Program) course.

A digital certificate is also awarded if you manage to clear the exam and submit all the assignments satisfactorily. The certificate is industry-recognized and can be used to enhance your career prospects. The Steel Quality online course is perfect for postgraduate or undergraduate students pursuing their degree in the field of Metallurgy and Materials.

The Transport Phenomena certification course is designed with a phenomenal structural course that will give a complete fundamental understanding that is involved in chemical engineering. For all students of chemical engineering, this is a fundamental subject and is also relevant in disciplines as varied as mechanical engineering, biotechnology, and nanotechnology. 

The topic has revolutionized the way engineering science is taught over the past few decades. This chapter dealt with the integrated care of the various transport systems, both in industry and in nature, which is everywhere. Owing to the underlying similarity of the mathematics and molecular processes explaining those methods, momentum, heat, and mass transfer are taught together. 

The Transport Phenomena training will include equal industrial support that will help the enrolled candidate to learn about the segments more analytically. The course will begin with a fundamental understanding of the core modules that is essential to understand the later portion. Students would be made aware of the key science ties and motivated to address questions on the basis of apt analogies. The Transport Phenomena certification would be provided in the last that is the assured certificate for the candidates who want to pursue some high courses in the upcoming future.

The Transport Processes I: Heat and Mass Transfer certification course will focus on a fundamental understanding of the area in unit operations that include mixing, heating/cooling, reactions, and flow, physical and chemical conversions of raw materials to products are achieved. The success of these processes depends significantly on the heat and mass transfer borne along with flowing fluid and across solid/fluid interfaces.

The Transport Processes I: Heat and Mass Transfer training will focus on enhancing the comprehensive structure of the respective programme. The course will undertake transport through interfaces due solely to molecular diffusion, which is the transport of concentration or temperature gradients in a stationary fluid. In unit operations, the combination of convection (transport by moving fluids) and diffusion determines the transport rate and the overall performance.

The Transport Processes I: Heat and Mass Transfer certification will be provided at the end of the course. The candidate will acquire a physical understanding in this course of how the equilibrium between convection and diffusion influences the total transfer speeds in chemical systems and gives rise to many of the methodological parallels used in the design of chemical engineering. The course is structured as 12-week online comprehensive training along with industrial support for the course.

The Strategies for Sustainable Design certification syllabus spans 12 weeks. There will be five lectures weekly. Each session will be focused on understanding the nuances of sustainability and sustainable design processes using assignments, real-life projects, and examples. 

Vital sustainability principles and concepts are discussed at length in the Strategies for Sustainable Design program. The course also intends to deliver crucial insights for various design and sustainable development processes essential to strengthen Sustainable Development (SD). 

Over the program duration, you will develop a holistic understanding of sustainability in built environments and industrial designs. You will also learn about life cycle analysis and environmental impact assessment in the Strategies for Sustainable Design course. 

For this, the course touches on different domains to facilitate curiosity and enables you to incorporate design thinking in dealing with your project work. Moreover, AICTE approves of this online course. Swayam provides a digital certificate on successful course completion and fulfilling the prescribed criteria.

The Turbulent Combustion: Theory and Modelling certification course is more comprehensive and analytical in nature. The course will focus on basic knowledge of combustion and is supposed to enhance the architecture of industrial combustion systems by increasing the stability of the flame, enhancing the performance of combustion, and reducing the creation of contaminants.

An integrated understanding of theoretical and numerical aspects of combustion will be discussed in this course, especially in the field of unstable turbulent combustion. The Turbulent Combustion: Theory and Modelling training is provided with each and every module of the certification syllabus. The course will later lead by the debate will continue on fundamental techniques and recent developments in the fields of turbulent combustion, thus maintaining crucial ties with the underlying fundamentals of combustion.

The Turbulent Combustion: Theory and Modelling certification will provide a structural verification that a student has successfully passed the course with effective training that will help the candidate to pursue any further course in the same respective field in the upcoming future. In this particular course, an analytical approach towards each and every module is given that will enhance the learning of the students.

The Structural Biology certification syllabus has been purposefully designed for Biological Sciences, Biosciences, and Bioengineering students. Over 12 weeks, it will educate you on structural units forming biological macromolecules. Their hierarchies, pros & cons, and visualizing 3D structure files will also be discussed. 

Approved by AICTE, the Structural Biology course by Swayam will also introduce you to molecular dynamics using various case studies. So, you will know how to apply the acquired knowledge effectively. 

The Structural Biology certification course links biological events to deduce how biological macromolecules are folded, generated, and become functional. As such, the course will equip you to take on further advanced studies in drug designing and macromolecule-based engineering. 

Swayam offers the Structural Biology program at an introductory level. Replete with case studies, books, and references, the course ensures you have a holistic learning experience. And if you want to certify your learnings, you can also take the certification exam and obtain the course certificate.