Online Engineering And Architecture Courses & Certifications

Joining the Structural Dynamics online course by Swayam will help you understand how a structure responds, particularly buildings, to different dynamic loads. Loads such as earthquakes, machine vibration, wind, and ambient vibration. 

The complete Structural Dynamics certification syllabus has been spread over 12 weeks and divided into different modules which are delivered online. This course is a civil engineering course and categorized as a core course. 

Moreover, Swayam provides the Structural Dynamics online course at the UG level and comprehensively covers the fundamentals of structural dynamics. Other core topics included in the curriculum are Free Vibration of SDOF, Forced Vibration of SDOF, and Response to Arbitrary Motions.

The entire Response Spectrum and Earthquake Response of MDOF systems are also explored in detail, allowing you to have a firm grasp over structural analysis. Moreover, you can earn a course certificate to testify your newly acquired learnings on completing the Structural Dynamics course. 

The Structural Geology program is approved by AICTE and offered by IIT Kanpur. It primarily focuses on structural geology fundamentals. The course layout has been specially designed to provide an introductory level understanding of this subject, which belongs to the earth Sciences category.

Knowledge of basic maths and physics will be essential in adequately completing the Structural Geology certification syllabus. Undergraduates interested in learning geology can join the course and understand the subject in detail. 

The Structural Geology online course broadly covers concepts of geometry, kinematics/strain, and dynamics/stress in Earth and other planetary bodies. You will learn to use geological time scales to understand how rocks deform over time through weekly lectures by Prof. Santanu Misra of IIT Kanpur. 

Moreover, you can take an optional proctored exam to receive the Structural Geology certificate and acknowledge your newly acquired knowledge. This online program also has a free registration process, so you can audit it without paying a fee.

The online certification course on Urban Transportation Systems Planning by Swayam will be covering the challenges need for efficient and effective planning of urban transport that is required in the modern-day. The online program will further be addressing the- growing travel demand and will be helping to formulate strategies to maintain sustainable development in a more affordable and sustainable way. 

The Urban Transportation Systems Planning training has been divided and subdivided into nine modules that will be held for a period of twelve weeks. The session will further help in capacity building amongst policymakers, master students, and practitioners.  

The Urban Transportation Systems Planning certification syllabus includes- Probit analysis, Logit model, Nested logit model, Two-stage modal split models, Multinomial logit model, Estimation of logit models. The course will be helping the students to make decisions and transport planning to make the urban transport more efficient and effective.

Buildings are one of the primary consumers of resources today. Thus, it is imperative to consider sustainability aspects in designing more efficient buildings. As such, the Sustainable Architecture certification course aims to understand the role of sustainable practices in developing efficient buildings for reduced consumption. 

Available at the UG level, the Sustainable Architecture online course touches upon various parameters of planning and designing sustainable buildings. It also elucidates concepts of design, technology, and practices used to create efficient buildings. The Sustainable Architecture program explains the science behind the high performance of efficient buildings; and covers the various tenets of sustainable architecture planning as a subset of sustainable development.

The Sustainable Architecture course by Swayam is approved by AICTE and caters to the needs of individuals involved in the domain of architecture and planning. Moreover, you can earn a digital course certificate on successful completion and find lucrative work offers across the design and architecture industry. 

This online certification program on the Vibrations of Structures online course will be exposing the different analyzing and modeling techniques that are involved in the continuous systems such as - plates, strings, beams, and bars. During the online course on Vibrations of Structures by Swayam special emphasis is given to approximation and variational methods, which would be further helpful for handling complex systems in the real world. The  Vibrations of Structures certification syllabus has been comprehensively structured to help the students as well as the academic researchers and industrial applications to provide advanced level skills and key principles. During the twelve-week program emphasis will be given on - Modal analysis - II, Modal analysis: approximate methods - I, Properties of the eigenvalue problem. The course has been formulated as a core online program.

The online programme on the Viscous Fluid Flow training will be covering the fundamental concepts of fluid mechanics and its application form an advanced and expert point of view. The certification course on Viscous Fluid Flow by Swayam focuses mainly on the viscous flows in the incompressible regime and applicants of similar time. 

The course will further be covering the derivation of Navier-Stokes equations, Stoke's first and second problems, exact solutions for simplified configurations, creeping flows, laminar boundary layers, wall-bounded or free-shear boundaries or hydrodynamic stability and an introduction to turbulence in the Viscous Fluid Flow certification syllabus. 

By availing of the programme, the students along with researchers and professionals will be equally benefited. The twelve weeks programme will be helping the students to use mathematical tools for solving real-flow problems and also use its applications in real solutions. The program will thus be helping the students to use stability theorems in real-world applications.

The online certification program on VLSI Physical Design by Swayam will be introducing the appearing candidates with the fundamentals and the principles that are involved in the basic design flaw in the VLSI physical design automation. The VLSI Physical Design training will also be covering the basic data structural designs and the algorithms used for implementing the designs in the solution statements. 

In the VLSI Physical Design certification syllabus, the candidates will be provided with- assignments and examples that will be helping them to comprehensively understand the primary concepts that are involved in the VLSI physical design.   

Over the course of twelve weeks, the concepts that will be involved are - Grid routing and global routing, Interconnect modeling and layout compaction, Detailed routing and clock design, Physical synthesis and performance-driven design flow, Clock routing, and power/ground, Static timing analysis, and timing closure. The program will thus help them to develop the students existing skills in digital circuits.

The Water and Waste Water Treatment training is an undergraduate program that deals with the aspects of the environment and civil engineering. The course is laid out by the Indian Institute of Technology, Roorkee through the forum of Swayam. The program aims to discuss the aspects related to the subject matter and complete the Water and Waste Water Treatment certification syllabus in the time span of 12 weeks. The course imparts information regarding water treatment, wastewater systems, the process of disinfection, etc. The course is available throughout its existence at zero cost for all the students who want to join the program. Candidates can apply for this course and pursue the same till the time they are well versed with the concepts as it is a self-paced learning program. 

Candidates get to compete for the certification of the program at the end of the Water and Waste Water Treatment online course. The certification process is optional for the students and is not mandatory for everyone. Candidates who want to go through the process of giving exam fees followed by the offline exam can get the opportunity of being a certified participant of the course if they qualify for the exam as per the eligibility criteria announced by the website. Candidates who enrol in the Water and Waste Water Treatment certification course will get introduced to the practical problems that the industry faces on a common basis through case studies and practical examples. Participants also get the opportunity to understand the concepts in a better manner through assignments, tests, and quizzes provided in the course.

The course deals with the aspects of the man-made or artificial fiber industry and the textile industry at large. The Textured Yarn Technology certification course imparts information regarding fundamentals of the topic, issues faced by the industry and its solutions, advantages and its limitations, etc. The program gives the option of self-paced learning to all the candidates if they are not able to complete the Textured Yarn Technology certification syllabus in 12 weeks. Candidates can take the sessions according to their own times. 

The course is absolutely online and can be availed at zero cost. Candidates also get the opportunity of getting a certificate towards the end of the course which can be availed after paying the exam fees followed by an in-person exam. Candidates get to obtain study material of Textured Yarn Technology online course which is provided by the platform to all the applicants at zero cost. Candidates need not maintain any minimum attendance percentage for this course.

The Water Supply Engineering certification is an undergraduate as well as a postgraduate program that is made available to the students through the Indian Institute of Technology, Kharagpur in association with the Swayam. The program needs to be completed in the online mode and is available for free for all the students. The program permits the students to complete the Water Supply Engineering certification syllabus according to their requirements since there are no restrictions regarding time and attendance. The course takes 12 weeks to be understood thoroughly, however, students are allowed to take extra time to access the course without paying any amount. 

In case the student wants to get a certificate on the completion of the Water Supply Engineering training, he or she can pay the exam registration fee and appear for an offline exam. The online course is in association with the forum of Swayam and it provides course material such as video lectures, tests, quizzes, assignments, etc. within the program. The course can be joined at any time from anywhere as it is available throughout the year on the website. The Water Supply Engineering certification course provides interactive sessions through discussion groups which helps the students discuss their queries and understand the concepts properly.

This online session on Theory of Yarn Structure by Swayam will be dealing with a structured system of theoretically derived inherent laws that pertains to the properties and structures of yarns. The course of the Theory of Yarn Structure training has been divided into a number of modules and each of these modules will be covering details of the - terminologies, definitions, and fundamental relations that will help them to secure the fundamental knowledge and clear their basic concepts. The  Theory of Yarn Structure certification syllabus over the period of twelve weeks will be covering the key principles and topics of - Relation among yarn count, twist, and diameter, Yarn shrinkage due to washing, Radial fiber migration in yarns, Mass irregularity of yarns, Helical model of fibers in yarns. The knowledge that the students will learn in the course will be helping them to secure a job in the textile industry and its applied industry.

The Welding Processes certification course is an AICTE approved FDP program. It is provided by IIT Madras. Candidates will learn about the welding process, resistance spot, and electron beams. 

The course is provided to all the participants for free of cost. The course offers its learning in the online mode and it is offered for the duration of 12 weeks. This is a self-paced training which is provided in association with the platform of Swayam and students are allowed to take more time to complete the Welding Processes certification syllabus of the program. Students can learn from the video lectures on their own when the syllabus is completed by the mentor. 

The program offers flexible timings to all the participants and there are no limitations regarding attendance or timings of the sessions. The course provides a discussion group for all the students in which they can clear their doubts regarding the topics. The Welding Processes online course offers the certification for the course for which the students will have to give an offline exam by paying the exam registration fees. Students will get the study material with the course for free which includes video lectures, tests, assignments, case studies, etc.

Renewable Energy Engineering: Solar, Wind and Biomass Energy Systems online course is an elective programme for students pursuing undergraduate and postgraduate level degrees and science and engineering professionals. This AICTE-approved, eight-week-long FDP course has no prerequisites. The training is suitable for a broad audience. 

Furthermore, the Renewable Energy Engineering certification belongs to the 'chemical engineering' and 'energy and environment categories. You will learn about various energy sources and the methods through which they can be utilised. The curriculum will also help you familiarise yourself with the design and engineering aspects of non-conventional energy sources, limitations of such technologies, research trends, developments, and various other critical touchpoints.

Renewable Energy Engineering online training also involves weekly assignments to help you understand the concepts better. These assessments will help determine your final score, along with your final exam performance, to determine your eligibility for the course certificate. This programme is an IIT Guwahati curation, well-recognised by the energy industries and energy equipment manufacturing companies.

The Cooperatives and Farmers’ Organizations online program by Swayam discusses many facets of the cooperative movement of India and other developing nations. You will study the movement’s history, the difference between private/public sectors and cooperatives, and the concept underlying this movement. The course also discusses policy-making bodies associated with farmer’s organizations and cooperatives.

You will learn about distinctive cooperatives in rural and agricultural sectors. Also, you will study the rules, laws, and regulations governing the cooperatives along with their basic principles. The role of self-help groups for the socio-economic upliftment of rural people will be described in detail.

The Cooperatives and Farmers’ Organizations online course will acquaint you with multiple kinds of non-government organizations (NGOs) and farmers’ organizations which are dedicated to empowering the poor and farming communities for their nations. You will also explore the processes, philosophies, and principles that these groups utilize.

"Introduction to Automotive Embedded Systems & Autosar" Certification is a short term online software course provided by Skill Lync. When hardware is changed there is a danger of updating it with the same functionality, and to control this, Autosar based Software Development Architecture is adopted where software remains generic, and this generic software architecture can be used for multiple OEMs.

The "Introduction to Automotive Embedded Systems & Autosar" Syllabus covers every aspect of the Electrical and Electronic complexities of automotive systems, and different automotive domains including Powertrain Control, Body Control Module, and ADAS etc. Along with this, the learners are also taught about the most important tools like MATLAB, and SIMULINK required for Automotive Software Development. 

The learners irrespective of being a fresher or any experienced working professionally after taking the "Introduction to Automotive Embedded Systems & Autosar" training can magnify their knowledge in Automotive Embedded Systems.

"Fuel Cell & Ultra-Capacitors for EV using MATLAB & Simulink" Certification is a short online course provided by Skill Lync that is specifically made for Electrical & Electronics Engineering Students. Global warming is on the rise, and to address this burning issue the automotive industry is evolving constantly. A fuel cell electric vehicle is the first choice when it comes to replacements of ICE vehicles. And, this "Fuel Cell & Ultra-Capacitors for EV using MATLAB & Simulink" Certification is an ideal one to gain insights into a fuel cell.

This "Fuel Cell & Ultra-Capacitors for EV using MATLAB & Simulink" Syllabus covers a Simulink model creation that includes vehicle model and powertrain model. Along with these learners will be taught the GREET software where a well-to-wheel analysis will also be performed.

The "Fuel Cell & Ultra-Capacitors for EV using MATLAB & Simulink" Certification Course will help candidates build their professional portfolio, and also adding this certification to their resumes or CV’s will have a positive impact on their future career.

Used mainly to support power cables, pipes, and instrument cable trays, Piperacks are core building elements in petrochemical, power, and chemical plants. To learn all about them, Skill-Lync’s Design and Analysis of Piperack Structures Using STAAD.Pro course is an ideal option, given course flexibility, comprehensive curriculum, and 24x7 support. 

No prior experience of STAAD.Pro or steel structures are needed to enrol for the course. One of the major Designs and Analysis of Piperack Structures Using STAAD.Pro course benefits are that the ratio of theoretical to practical learning is 30/70, so you can easily apply your knowledge to real-world cases. 

The course is a 100% online learning course continuing for a duration of twelve weeks. You can even request a one-on-one demo session to better understand the course content and instruction. 

Throughout the Design and Analysis of Piperack Structures Using STAAD.Pro the course duration, you will work on two projects. Two types of certificates are available – the certificate of completion offered to all learners and the merit certificate reserved for the top 5% of the class. 

The Concrete Technology Certification Course is a 12-weeks long course conducted by Indira Gandhi National Open University. The course helps candidates understand the various processes included in concrete production and concreting operations. The course is taught through video lectures from experts covering important topics on concrete production and operation.

The Concrete Technology Training Course offered by Swayam is taught by Prof. Dr. Munish Kumar Bhardwaj, a distinguished member of IGNOU. The course offers valuable insights on different steps involved in concreting operations including proportioning, mixing, transporting, placing, compacting, finishing, and curing of concrete.

The Concrete Technology Online Course is a diploma-level course that deals with the study of concrete in a detailed manner. The course units constitute discussions on the properties of concrete and the design of concrete mix. It also deals with the steps in the production of concrete and other concreting operations.

The Repair and Maintenance of Buildings Course is a massive open online course that discusses the defects in buildings and the factors behind their deterioration over the course of time. The course explains the importance of proper maintenance and infrastructure management after the building construction to increase its enduring power.

The Repair and Maintenance of Buildings Course offered by the Swayam portal acquaint civil engineering aspirants with the detailed aspects of building maintenance and repair. The modules are prepared in a way to helps learners grasp concepts quickly and efficiently without any difficulties.

The Repair and Maintenance of Buildings Training Course are coordinated by Dr. Munish Kumar Bhardwaj, Professor at the School of Engineering and Technology, Indira Gandhi National Open University, New Delhi. The 3 credit course is taught over 12 weeks with the help of informative video lectures by experts.

The Automotive Seating Design using CATIA V5 online course is offered by the online educational platform Skill Lync for engineering graduates. This course is a part of the mechanical engineering industry and the course study is about the basics of designing, the various steps involved in structuring, the building procedures, and the methodologies. The online course will help the students develop problem-solving skills and counter challenges with automotive technology. 

The course on ‘Automotive Seating Design using CATIA V5’ enables the candidates to know about the geometric dimensioning and tolerancing (GD&T) of passenger car seat design according to the automotive level. In this course, the student will gain experience with handling the software tool Catia for foam and structure design. The course educators who are leading professionals from the fortune 500 companies guide the students and provide an extensive understanding of the subject through the lectures and project support during the course.

Thermal Operations in Food Process Engineering: Theory and Applications certification is a 12 weeks course that is provided on the Swayam platform by NPTEL and IIT Kharagpur. This course caters to engineering students from all backgrounds. This covers the fundamentals of processing and preservation technologies that are needed for food processing in different industries.

Thermal Operations in Food Process Engineering: Theory and Applications training provides knowledge about thermal processing that is associated with the unit operations of the different stages in processing. Usually, the concepts in thermal operations are not taught elaborately when the candidates are students of engineering. But through this course, the students will get accustomed to the comprehensive knowledge of thermal processing. The certificate is guaranteed once the candidates successfully attend, and gain 75% during the invigilator marked exam.

The Thermal Processing of Foods certification is a 12 weeks course. This certification course is available online on the provider platform of Swayam by NPTEL and IIT Guwahati. Thermal processing usually means controlling the temperature combination and the precise time for removing the microorganisms from food using the process of heating, and this course teaches the concepts involved in thermal processing to fulfill the projected of feeding 9.1 billion world population in the year 2050.

Thermal Processing of Foods training teaches the participants how safely, and keeping the food nutritious the ready-to-eat foods are thermally processed so that they have a long shelf-life, and cater to the goal of The Food and Agriculture Organization (FAO). The final exam is conducted in the presence of a coordinator and the candidate’s performance in assignments guarantees the certificate for the engineering background students.

The Dairy and Food process and products technology Training Course is an open online course that covers the basics of dairy food processing and production steps. The course will discuss the techniques and steps involved in dairy production and preservation as followed by dairy and food processing industries.

The Dairy and Food process and products technology Certification Course is offered on the Swayam portal. The course ensures to impart learners with the basic knowledge of dairy food processing along with the different levels of operations involved at various stages of processing. The course will be coordinated by By Prof. Tridib Kumar Goswami of IIT Kharagpur.

The Dairy and Food process and products technology Online Course is an introductory course that is taught over 12 weeks. The course is delivered through expert lectures that will enhance the knowledge of learners. The postgraduate level course will be assessed on the basis of a series of 12 assignments and a final proctored examination.

The Advanced Dynamics online course is offered by Swayam, an initiative by the education ministry of the Indian government. Knowledge of dynamics is helpful not only for estimating dynamic forces for design like machine tools, aeronautical and automotive systems but also for comprehending occurrences such as cyclonic circulation, tides, boomerang flight, top precession, etc.

This Advanced Dynamics training covers the essential subjects in rigid and particle body dynamics utilizing analytical and Newtonian dynamics methods. The course will begin with kinematics in non-inertial and inertial (rotating) frames, then move on to examine the various ways to study the dynamics of a system of particles, single particle, rigid bodies in two dimensions and three dimensions, and ultimately the analytical dynamics approach. The Advanced Dynamics syllabus will place a heavy focus on problem-solving and is designed to provide students with a solid foundation in dynamics.

The Advanced Materials and Processes online course is an 12 weeks program offered by Swayam, an initiative by the government of India’s Ministry of education. The course covers the classification and basic foundation of functional and structural materials; high-temperature materials: processing, structure, oxidation resistance, and mechanical behaviour of stainless steels, co and ni-based aluminides superalloys and silicides, ceramic composites and carbon-carbon.

The Advanced Materials and Processes training teaches about shape-memory alloys: mechanisms of one and two-way shape memory effect, pseudoelasticity and thermoelasticity, reverse transformation, applications, and examples; bulk metallic glass: stability and criteria for glass formation, mechanical behaviour and examples; nano-materials: size effect on functional and structural properties, classification, properties and processing of nanocrystalline materials, multilayered and thin films coatings, multiwalled and single-walled carbon nanotubes.

The Advanced Materials and Processes syllabus covers hard and soft magnetic materials for storage devices: processing and design; piezoelectric materials: properties and processing; advanced material’s advanced processes: rapid solidification, single crystal growth, chemical and physical vapor deposition of thin films, inert gas condensation, etc.

The Advanced Microwave Guided-Structures and Analysis online course is a 12 weeks online program offered by Swayam, an initiative by the Government of India’s Ministry of Education. The course starts with an introduction to the full characterisation of Scattering Matrix Parameters. Following that, Maxwell's Equations are addressed in both time-harmonic and instantaneous versions. 

The Advanced Microwave Guided-Structures and Analysis training covers the wave function in a homogeneous medium and radiated fields from a current source in a continuous medium, in terms of electric and vector potentials/scalar magnetic.

Advanced Microwave Guided-Structures and Analysis syllabus covers the phenomena of transmission and wave reflection at dielectric and conducting surfaces and investigates oblique and normal incidences. The course covers a detailed analysis of the rectangular waveguide in terms of power flow, modes of propagation, and power dissipation.

The Aircraft Propulsion online course is a 12 weeks online program provided by Swayam, an initiative by the Ministry of Education, Government of India. This Aircraft Propulsion training covers the gas power cycles used in aviation propulsion. As a result, many types of aircraft engines, their performance, parts, and characteristics are discussed. The course is focused on cycle analysis and its various attachments for improvisation. Furthermore, the Aircraft Propulsion syllabus covers several aircraft engine components such as the turbines, compressor, nozzle, combustor, and more.

The Algorithms for protein modelling and engineering online course duration is 12 weeks and it is offered by Swayam, an initiative by the Indian government’s Ministry of Education. Proteins are responsible for nearly all of the activities of humans and all living organisms. Knowing protein interactions and activities benefits in disease initiation, progression and medication formulation. Bioinformatics, an integrative field concerned with creating algorithms for biological issues, is an established alternative to costly and resource-intensive experimental approaches in this respect.

The Algorithms for protein modelling and engineering training explores the algorithms that underpin the existing Bioinformatics computer software for engineering and protein modelling, so that we may increase their applicability by customizing them. The Algorithms for protein modelling and engineering syllabus also covers various unique computational difficulties and open areas that can greatly improve human existence if they are solved.

The Applied Thermodynamics online course is a 12 weeks program offered by Swayam, an initiative by the government of India. Several lectures are dedicated to fundamental engineering thermodynamics. This Applied Thermodynamics training covers a thermodynamic and theoretical foundation for the gas and steam power cycle, psychometric concepts, refrigeration cycle, gas turbine engine cycles, and internal combustion engine, as well as rocket and aviation propulsion cycles. 

The Applied Thermodynamics syllabus is designed in accordance with the criteria of the “Energy/Mechanical Engineering” UG course curriculum for relevant engineering fields across the country. The systematic online teaching, problem-solving methodology, and online evaluation will assist the applicant in transferring credit for their certification course.

The Applied Thermodynamics For Engineers online course is a 12 weekly program offered by Swayam, an initiative by the Education Ministry of the Government of India. Because thermodynamics is of basic relevance to mechanical engineers, it is always studied in the second or third semester. This course may be considered as the next phase, in which thermodynamic concepts will be used to explore various power generating and absorbing cycles.

The Applied Thermodynamics For Engineers training covers characteristics of pure substances, as well as the thermodynamic property relations, allowing candidates to estimate all-important thermodynamic properties at any given state point. The gas and vapour energy cycles will be examined next, followed by the concepts of cogeneration and combination cycles.

The Applied Thermodynamics For Engineers syllabus includes an introduction to refrigeration cycles, chapter begins with a discussion of refrigerant choices. Following that, the course will teach characteristics of gas gas-vapour and mixtures, which leads to psychrometric processes. The course will conclude with a quick overview of chemical equilibrium.