Free Engineering And Architecture Courses & Certifications

The Advanced Microwave Guided-Structures and Analysis online course is a 12 weeks online program offered by Swayam, an initiative by the Government of India’s Ministry of Education. The course starts with an introduction to the full characterisation of Scattering Matrix Parameters. Following that, Maxwell's Equations are addressed in both time-harmonic and instantaneous versions. 

The Advanced Microwave Guided-Structures and Analysis training covers the wave function in a homogeneous medium and radiated fields from a current source in a continuous medium, in terms of electric and vector potentials/scalar magnetic.

Advanced Microwave Guided-Structures and Analysis syllabus covers the phenomena of transmission and wave reflection at dielectric and conducting surfaces and investigates oblique and normal incidences. The course covers a detailed analysis of the rectangular waveguide in terms of power flow, modes of propagation, and power dissipation.

The Control and Tuning Methods in Switched Mode Power Converters online course is a 12 weeks program offered by Swayam. Switch-mode power converters (SMPCs) are critical components in energy-efficient power conversion in developing applications such as electric cars, renewable energy, data centres, industrial automation, and so on. In this context, selecting appropriate modulation and control techniques for SMPCs is critical in order to fulfill demanding criteria such as efficiency, transient performance, line, and load management, disturbance rejection, etc. The Control and Tuning Methods in Switched Mode Power Converters training cover all the associated topics and techniques.

While the bulk of commercial regulator implementations are focused on small-signal analysis and pulse width modulation, rising switching frequencies, which are linked in part to bandgap devices, allow for increased operational bandwidth and improved performance. This Control and Tuning Methods in Switched Mode Power Converters syllabus give an introduction to traditional control and modulation methods, highlights small-signal performance constraints, compares controller tuning methodologies, and examines large-signal control approaches. The analysis of tuning approaches demonstrates how large-signal-based classification tuning methods may greatly enhance SMPC efficiency and performance, followed by the requirement for mixed-signal and digital control implementation.

The ‘Power system analysis’ course is offered by the Indian Institute of Technology Kharagpur through the Swayam online education portal. It is a National Program for Technology Enhanced Learning(NPTEL) online free course for the students pursuing their bachelor’s or master’s degree in electrical engineering.

The course helps the students gain comprehensive knowledge of per-unit systems and circuit system applications. This faculty development program by IIT Kharagpur is conducted for twelve weeks and is approved by the All India Council for Technical Education. The undergraduate-level course is guided by Dr. Debapriya Das from the department of electrical engineering at IIT Kharagpur. The course which is a part of the Electrical, Electronics and Communications Engineering, and  Power Systems and Power Electronics domains enables students to earn three-course credits. The course certificate received after completion of the ‘Power system analysis’ online training consists of NPTEL and IIT Kharagpur logos that represent its authenticity. 

The ‘Principles and Techniques of Modern Radar Systems’ is a study about the multisystem of radars in electronics engineering. The radar system principles program is a National Program for Technology Enhanced Learning Program that provides free online training to the students pursuing their undergraduate and postgraduate levels in electrical engineering, electronics and communication engineering, or communications and signal processing, on the Swayam education platform.

This elective course is offered by the Indian Institute of Technology Kharagpur for twelve weeks by the course instructor, Dr. Amitabha Bhattacharya, an associate professor from the department of electrical, electronics, and communication engineering at IIT Kharagpur.

The ‘Principles and Techniques of Modern Radar Systems’ online training program is approved by the All Indian Council of Technical Education and allows the students to gain three credits after completion of this course. The candidates of this faculty development program can avail of the certificate which is e-verifiable containing the logos of NPTEL and IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ online course is about the functioning and principles of various kinds of electro-mechanical instruments. This is a National Program for Technology Enhanced Learning online course by the online education platform Swayam. The online course is developed and organized by the Indian Institute of Technology Kharagpur.

This NPTEL free online course is conducted for twelve weeks and is a core course for the students of undergraduate level. It is categorized under the domain of electrical, electronics, and communication engineering, control, and instrumentation along with power systems and power electronics. The course instructor for the All India Council for Technical Education (AICTE) approved online program is Dr. Avishek Chatterjee from IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ training program enables the students to gain three credit points and provides the eligible students with an e-certificate with the logos of NPTEL and IIT Kharagpur after course completion.

The study of networks here in Communication Networks Certification calls for an understanding of network topologies, protocols, or algorithms that handle various information-exchange tasks or subtasks as well as tools for network design and performance analysis.

The properties and structure of communication networks are covered in detail in Communication Networks Classes to enable the back-and-forth movement of a physical entity, any network containing nodes and branches in any data communication and computer networks. 

All students get a Communication Networks Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Signal Processing Techniques And Its Applications Certification is that the information that they contain can be displayed, analyzed, or converted to another type of signal that is useful. In the practical world, analog products detect signals such as sound, light, temperature, or pressure and manipulate them accordingly to their usage.

Signal Processing Techniques And Its Applications Classes teach about the modern applications that have penetrated a wide range of systems, such as consumer electronics, digital communications, medical imaging, and so on.

All students get a Signal Processing Techniques And Its Applications Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

The primary purpose of Analog Electronic Circuits Certification is to serve as a foundational course for undergraduates and as a refresher course for graduate students and circuit designers employed in the industry.

It strikes the ideal mix between theory and practice in Analog Electronic Circuits Classes so that the studied circuits can be built in a laboratory course for undergraduates and their measured performance can be easily compared to the theoretically expected performance. It boosts theoretical confidence. 

All students get an Analog Electronic Circuits Certification by the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam initiative by the Government of India.

Signals and Systems online course is a core program provided by Swayam in association with NPTEL for students at the undergraduate level. The course is offered and curated by the esteemed faculty of IISER Bhopal. Students will get a thorough understanding and will be introduced to the fundamentals of signal processing and systems analysis.

The Signals and Systems certification by Swayam is offered in the Hindi language, but the lectures will also use scientific terms in English. Basically, students will learn the concepts and their explanations in Hindi. Further, the course falls under three broad categories that include- 'Communication and Signal Processing'  ‘Electrical’, Electronics and Communications Engineering', and lastly, 'Control and Instrumentation'. 

The Signals and Systems certification syllabus will include continuous-time systems and signals and introduce students to the various types of signals and transformations. After finishing the twelve-week program, students can register for the proctored examination to obtain a soft copy of a certificate.

Developed by IISc Bangalore, the Mathematical Methods and Techniques in Signal Processing programme extensively covers the various aspects of signal processing over the course of 12 weeks. All the modules are provided online by Prof. Shayan Srinivasa Garani and instructed in English.

The Mathematical Methods and Techniques in Signal Processing syllabus deep dives into topics like basic signals, systems & signal space, sampling theorems, signal representation, and wavelets. This way, the course will make you theoretically adept in signal processing.

You will also learn the core practices, methods, and techniques to efficiently carry out digital signal processing. Moreover, the Mathematical Methods and Techniques in Signal Processing online course has a PG level difficulty. If you have a strong background in basic DSP, you can upskill comfortably by enrolling in the Mathematical Methods and Techniques in Signal Processing course by Swayam. This FDP (Faculty Development Programme) course is also duly approved by AICTE.

The Photonic integrated circuit certification course will help candidates know about the different circuits involved in the design. The course and the curriculum for the course have been very well planned to keep in view of all the needs and exposure in this field today.

The experts will be conducting the sessions and discussion forums on an interactive basis so that the candidates do not face any trouble while learning the topics. The candidates will be able to understand basic topics such as coupling light in a waveguide system.

Assignments will be given to the candidates after the completion of every module. A marking scheme has been designed by the experts, to assess the candidates during the Photonic integrated circuit certification benefits. There is an end-term exam included in the course for all the aspirants who want certification. The candidates can reach out to the help desk or administration for any of their concerns.

Sensors and Actuators program is an undergraduate and postgraduate level FDP course approved by the AICTE. The online course falls under the control and instrumentation domain which is a part of the broader category of electrical, electronics, and communication engineering. Designed by IISc Bangalore, this program will run for twelve weeks and equip students with knowledge on microtechnology and related topics.

The Sensors and Actuators certification by Swayam consists of a well-curated and comprehensive curriculum that focuses on sensors and actuators and their importance and function in the real world. Students can enroll for free in this interesting course that will consist of video lectures created for a thorough understanding of the subject. 

Furthermore, candidates can go through a list of texts referred to in the course by the instructor and prepare for the final exam. The proctored exam is held for those who wish to gain a Sensors and Actuators certificate to showcase their knowledge and accomplishment of completing the entire course. The training falls under the areas of control and instrumentation and electrical, electronics, and communications engineering.

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ online course is offered by the Swayam platform, an initiative by the ministry of education in India. This design-based program is developed and structured by the ‘National program of Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC).

This is an elective course provided for the students and faculty in the engineering domain who will develop their skills and expertise in circuit designs. 

The course educator for this online training program on Op-Amps is Dr. Hardik J. Pandya who is an assistant professor from the department of electronics systems engineering which is under the division of electric sciences in IISC, Bangalore. The program is part of the electrical, electronics, and communications engineering that will fetch the students with three credit points. 

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ is a certification program that is scheduled for twelve weeks for the candidates of the course.

The Design of photovoltaic systems online course is a faculty development program advocated by the AICTE and is developed by the National Programme of Technology Enhanced Learning and the Indian Institute of Science in Bangalore. This design-based program is an elective course and a part of electrical, electronics, and communication engineering.  

In this course, the learners gain an understanding of the functioning of the photovoltaic cell and its design system and structure. The program is organized for a period of twelve weeks and the course educator for this course is a faculty from IISC, Prof. L. Umanand from the department of electronics systems engineering. The course curriculum provides three credit points and levels of the undergraduate or postgraduate standard for the students. 

The Design of photovoltaic systems training provides an opportunity for the students to discuss the principles of electrical features and coordination in the PV cells and circuits through an experiential learning process.

The ‘Fabrication Techniques for MEMs-based sensors: clinical perspective’ online course is provided on the online education portal, Swayam by the ministry of education in India. This course is a faculty development program accredited by the AICTE and is developed and offered by the National Program for Technology Enhanced Learning(NPTEL) in partnership with the Indian Institute of Science(IISC), Bangalore.

The fabrication techniques program is an elective course that is scheduled for a period of twelve weeks and is part of the electrical, electronics, and communications engineering domain. The students of this course will get an opportunity to explore the aspects of fabrication and microengineering. The course instructor for this undergraduate-level training program is Prof. Hardik Jeetendra Pandya from the department of electronics systems engineering in the division of electrical sciences. 

In this course, the students will gain an experiential understanding of the techniques and principles while also receiving the three credit points and the Swayam course certificate that consists of the logos of NPTEL and IISC.

The ‘Enclosure design of electronics equipment’ online course is about the process and techniques of product designing of electronic equipment and devices. This program is a National Program for Technology Enhanced Learning(NPTEL) online certification course and is developed and offered on the Swayam online education portal by the Indian Institute of Science (IISC) Banglore. This faculty development program on electronics design is approved by the AICTE and aids in the skill development of the candidates in the field of electrical engineering, and electronics and communication engineering. 

The learners of this course will gain three credit points after completing the course study guided by the IISC faculty, Prof .V.Chalapathi Rao from the department of electronics systems engineering in IISC. The course on ‘Enclosure design of electronics equipment’ by Swayam aids in the discussion of issues in the mechanical aspects of electronic equipment design and prototyping. This online elective NPTEL course is conducted for twelve weeks for undergraduate and postgraduate level students.

The online course on Biophotonics by Swayam introduces the rudimentary concepts of photonics and biology along with the discipline of medicine. The Biophotonics certification syllabus for a period of twelve months will be covering the following topics- basics of biology, light-matter interactions, biophotonics, biosensors, light activate therapy and other topics related to the domain. For the course, students from a multi-discipline can join. Candidates from electronics, biological sciences, bioengineering, communication engineering, and others can apply for the Biophotonics online course and have their existing skills developed. 

The course will be held over digital platforms. The applicants further can register for the course for free but for getting the certificate they can choose to apply for the exam. For the benefit of the participating candidates, the course type has been structured as an elective. The program will thus help the students to learn about the basics of light-matter interactions.

The online certification program on VLSI Physical Design by Swayam will be introducing the appearing candidates with the fundamentals and the principles that are involved in the basic design flaw in the VLSI physical design automation. The VLSI Physical Design training will also be covering the basic data structural designs and the algorithms used for implementing the designs in the solution statements. 

In the VLSI Physical Design certification syllabus, the candidates will be provided with- assignments and examples that will be helping them to comprehensively understand the primary concepts that are involved in the VLSI physical design.   

Over the course of twelve weeks, the concepts that will be involved are - Grid routing and global routing, Interconnect modeling and layout compaction, Detailed routing and clock design, Physical synthesis and performance-driven design flow, Clock routing, and power/ground, Static timing analysis, and timing closure. The program will thus help them to develop the students existing skills in digital circuits.

The study of the 8085 architecture, functional diagram specifics, instruction kinds with straightforward programming, addressing modes, memory interface, and timing diagram is provided by Digital Electronics and Microprocessor Certification, interacting with auxiliary hardware like the 8155 and 8255.

Digital Electronics and Microprocessor Classes introduces the students to the fascinating world of microprocessors and its integrated circuit parts, their programmability for a certain application, etc. 

The 8085 microprocessor family is covered in depth in the Digital Electronics and Microprocessor Certification Syllabus, and you will also be introduced to additional cutting-edge microprocessor families. 

All students get a Digital Electronics and Microprocessor Certification by College of Engineering, Anna University, Chennai under the Swayam Initiative by the Government of India. 

The Engineering Econometrics certification course is an elective course under the management studies category at IIT Kharagpur. This course is offered at both the undergraduate and postgraduate levels for students of management, engineering, or multidisciplinary subjects. And Prof Rudra P Pradhan instructs this online course. 

The Engineering Econometrics training syllabus will explore data modelling, spreadsheet, and analysis required to make significant business analytics decisions. This is quantitative training that will discuss problems related to business/management. Moreover, to enhance the students' decision-making and problem-solving skills, the course uses real-life cases and problem sets.  

Students can audit the Engineering Econometrics programme by Swayam for free if they meet the essential prerequisites. However, those who want to receive the course certificate on completion must complete all 12 in-course assignments and the end-term proctored exam. The cumulative passing score of the assignments and exam will determine the eligibility for the e-certificate.

The Engineering Mathematics II online course is a 12-week course and the second part of Engineering Mathematics training. This programme is an undergraduate-level core course, and a  part of the mathematics category, offered by IIT Kharagpur. The course will be instructed in English by Prof Jitendra Kumar.

The Engineering Mathematics II certification syllabus deals with the essential and fundamental aspects of mathematics required for undergraduate science or engineering studies. Some of the topics covered under the course in the first eight weeks are vector calculus, numerical and complex analysis, and Laplace Transform methods applied to several engineering-related problems. 

Towards the end, the last four weeks of the Engineering Mathematics II training deals with module five, including in-depth information about the Fourier Series Representation and Transform.  The course also has many reference materials to help the candidates do their research. Candidates may even register for the exam and receive an e-certificate based on their eligibility.

The Introduction to Environmental Engineering and Science - Fundamental and Sustainability Concepts Certification consists of a 12-week online course. IIT Kharagpur develops and approves the course syllabus, even if Swayam is appointed to teach the course. The Indian Institute of Technology, Kharagpur, and NPTEL are the organisations authorized to issue this course certificate.

The Introduction to Environmental Engineering and Science - Fundamental and Sustainability Concepts Certification course is a 12-week online program. The course syllabus is prepared and verified by IIT Kharagpur even if Swayam is appointed to provide the course. This course certificate is presented by the Indian Institute of Technology, Kharagpur, and NPTEL.

Introduction to Environmental Engineering and Science - Fundamental and Sustainability Concepts training is a part of the multidisciplinary core curriculum. This certification course is taught by Brajesh Kumar Dubey.

This online course's goal is to give a general overview of the environmental challenges that, per the directive of the Hon'ble Supreme Court of India, all of our working professionals should be aware of so that recycling, waste management, public health, and air and water pollution control can be improved.

This course covers the fundamental concepts of ecology, water pollution, water and wastewater quality and treatment, solid and hazardous waste management, soil and noise pollution, sustainability concepts including environmental impact assessment, life cycle assessment, waste minimization, the circular economy, and sustainable development insurance.

Are you interested in knowing the essential concepts of remote sensing? Here you have a chance to learn from one of the reputed IITs. Remote Sensing Essentials is a 12-week-long online course on remote sensing offered by Swayam in association with  IIT Roorkee. The online course will guide you through different aspects of remote sensing and will help you explore the fundamentals of satellite-based digital image processing and remote sensing technologies and tools. 

Remote Sensing Essentials Certification Course, administered by Swayam, is an FDP programme that is approved and recognized by the All India Council for Technical Education (AICTE). The Remote Sensing Essentials online course is an elective programme that is prepared and supervised by Prof. Arun K. Saraf who is a professor at IIT Roorkee. The course is basically a free online programme and the learners can pursue it completely free of cost except for certification. To be eligible for the certificate of completion, the learners must appear for an exam that demands an exam fee of Rs 1,000. The expected candidates for the course are undergraduate, postgraduate and PhD students in the civil engineering field who want to learn more about remote sensing.  

The Microwave Remote Sensing in Hydrology Remote Sensing in Hydrology certification course is a three months online program. Even though the program is provided using the Swayam platform, the Indian Institute of Technology Bombay and NPTEL firms have established this certification program, which was created by IIT Bombay.

The  Microwave Remote Sensing in Hydrology training covers the fundamentals of passive and active microwave remote sensing with applications in civil engineering (hydrology, meteorology), as well as the ideas of processing microwave images using free and open-source programming languages like Python.

This course will give a general overview of how to get students ready to read and understand microwave data for difficult water-related scientific and policy problems. This course will be valued and commended by ERDAS, RMSI, and other companies with a remote sensing and GIS applications division. Prof. J. Indu explains this certificate course.

What makes the Soil-Structure Interaction program unique and compelling is that it discusses the details of the soil structure models in more detail than in any undergraduate degree courses. The course will explore the models for a shallow foundation under various subgrade characteristics and loading conditions. The training receives industry support from civil engineering companies.

Candidates enrolling for the Soil-Structure Interaction certification will learn about elastic foundation problems on beams and plates and using FDP methods to understand different foundation models. They will spend twelve weeks in this AICTE approved elective course in civil engineering and structural analysis. 

Soil-Structure Interaction is an online course available on the Swayam learning platform. The syllabus is designed by professor Kousik Deb from the Indian Institute of Technology, Kharagpur. He will also be the educator of the course. Candidates can either audit the course for free or opt for a certification. There are assignments and an end-of-the-term examination that they will have to successfully complete. 

The ‘Industrial Safety Engineering’ online course is a study about the different aspects and operations of safety involved in engineering systems in the industry. This training program is a National Program for Technology Enhanced Learning online course and is provided on the Swayam online education platform. The elective course for postgraduate level students is offered by the Indian Institute of Technology Kharagpur.

This faculty development program is conducted for twelve weeks for the students belonging to domains of engineering, science, and management. The course on engineering safety systems is approved by the All India Council for Technical Education.

The course educator for the ‘Industrial Safety Engineering’ online training is Dr. Jhareswar Maity, faculty from the department of industrial and systems engineering at IIT Kharagpur. The students in this online course can earn three credits after completion of the program and will receive the course completion certificate fulfilling the required mandates.

The ‘Advanced Engineering Mathematics’ online course is a study about the analytical functions and applications of the various concepts and ideas that form the core of engineering mathematics. The National Program for Technology Enhanced Learning program (NPTEL) free online course is offered on the Swayam education platform for the undergraduate and postgraduate students of engineering and science.

The course curriculum is designed and provided by the Indian Institute of Technology Roorkee for twelve weeks. This certification course is a core course for undergraduate-level students. The course educator for this program is Dr. P. N. Agarwal from the department of mathematics at IIT Roorkee. The students of the ‘Advanced Engineering Mathematics online training program can earn three credit points. The candidates will also receive a course certificate that is e-verifiable with the authenticated logos of NPTEL and IIT Roorkee. The twelve weeks of training on the theoretical principles of the mathematical aspects of engineering and sciences enables the students to develop expertise in this domain.

The Numerical Methods for Engineers course by Swayam is designed to give an overview of various numerical methods that are of great interest to scientists and engineers. This course focuses on the numerical techniques, its analysis and its properties. The theory behind numerical methods and applications of them are also discussed. Numerical methods are mainly used by computers to solve iterative and step-wise problems which are tedious to solve by hands.

This course covers concepts like curve fitting, interpolation, regression, linear systems and mathematical concepts like algebra, integration and differentiation. Various computational tools like FLUENT, Aspen, FORTRAN and MATLAB are used for teaching. Algebraic equations are solved using open and bracketing methods like Regula-Falsi, Bisection, Secant, Multivariate Newton’s method, Newton Raphson and Fixed point iteration.

The 12-week programme comprises weekly assignments and 2.5 hours of video tutorial every week. A discussion forum for clearing the doubts of the participants is also available. This course would greatly benefit the candidate to improve their problem solving ability.

This course is offered under NPTEL, funded by MoHRD, by IIT Kharagpur. It is aimed at teaching the basic mathematics that is essential in every stream of undergraduate studies in the categories of engineering and sciences. The course comprises topics in integral and differential calculus, linear algebra, and differential equations which students will be able to apply in a number of engineering problems. 

This course will contain topics like Taylor's and Maclaurin's Theorems, Indeterminate Forms, Mean Value Theorems, etc. Partial derivatives, Taylor's development of functions of several variables, minima and maxima, and differentiability are also part of the course. 

The course also teaches Leibnitz rule (differentiation under the integral sign), improper integrals, applications of multiple integrals and multiple integrals, their properties. Other topics incorporated in a series of 60 lectures over the course of 12 weeks, include Linear Equations’ Systems, Dimension and Basis of a Vector Space, Properties of a Matrix and its Rank, Vector Spaces.

Swayam's Solid Mechanics is a 12-week online programme. The training covers the fundamental concepts of strain and stress in 3-D deformable bodies, along with the extension, bending, and torsion of beams. The course belongs to the advanced mechanic's domain and offers a curriculum segmented in 12 sections.

The online Solid Mechanics programme includes extensive learning content about the one-dimensional theory of beams, Mohr's circle, Euler Bernoulli and Timoshenko beam theories, Castigliano's theorem, and more.

Students study the different theories of failure and its applications, critical to the design of machine elements in the industry. For those who are interested in receiving certification from IIT Madras and the National Programme on Technology Enhanced Learning (NPTEL), must finish the assignments and qualify the test.

Applicants can register for the certificate programme in Solid Mechanics through a quick online process. Moreover, Ajeet Kumar, an associate professor from the Department of Applied Mechanics in IIT Delhi, will be your instructor, while you will get access to the all-encompassing curriculum free of cost.