Page 30 - NPTEL Courses & Certifications 2025 - Free & Paid Online NPTEL Courses

Offered by

IIT Kharagpur via Swayam +1

Certificate

Kinematics of Mechanisms and Machines

The Kinematics of Mechanisms and Machines certification course will help the candidate to know in detail about the mechanism and machines that will include both comprehensive and practical learning, pursuing with an illustration that will lead by the real-life incidents examples. Kinematic study of structures and devices will be discussed in this course. Analysis of motion and force transfer of connection systems, open and closed-chain planar robots and geared transmission will be included. The Kinematics of Mechanisms and Machines training will begin with an introduction to the subject and nomenclature and will cover direct and inverse kinematics, the study of velocity and acceleration, generation of kinematic paths for robots, singularities in kinematic chains, virtual work and force analysis concepts, and gear transmission kinematic analysis.

By finding out questions related to real-life implementations of mechanisms, the course will explain multiple principles. The course is intended to assist students with their fundamental knowledge of kinematic analysis and its application. The Kinematics of Mechanisms and Machines certification will be given at the time of the completion of the course. This is an elective eight-week complete online training for the students who want to learn about the major.

8 Weeks

₹ Free

Compare

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Evolutionary Computation for Single and Multi-Objective Optimization

The field of evolutionary computation is derived from Darwin’s theory of evolution and applies the principles of evolution to computational intelligence. The online course on Evolutionary Computation for Single and Multi-Objective Optimization by Swayam will help candidates master this technique to solve complex optimization problems.

The Evolutionary Computation for Single and Multi-Objective Optimization training is an eight-week course provided by IIT Guwahati. It is available for free enrolment on Swayam. After completing this course, candidates will be able to offer solutions to large-scale optimization problems arising in industries and research. Throughout the course, candidates will build and experiment with various types of EC designs.

This Evolutionary Computation for Single and Multi-Objective Optimization online course is an FDP course approved by AICTE. Some of the topics covered by the faculty include evolutionary algorithms, particle swarm optimization, binary and real-coded algorithms, and statistical assessments. After completing the syllabus, candidates can opt to appear for the final exam and receive the certificate.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of genetics

Offered by

IIT Tirupati via Swayam +1

Certificate

Introduction to Abrasive Machining and Finishing Processes

The Introduction to Abrasive Machining and Finishing Processes certification course will be providing the students with a detailed definition of the areas that are connected to the application of non-traditional as well as traditional abrasive finishing processes that are incorporated in the manufacturing industry. The lectures that will be conducted in the course on Introduction to Abrasive Machining and Finishing Processes by Swayam will be introducing the applicants to the basic principles and functions of the materials that are removed by the use of abrasives particles.

The Introduction to Abrasive Machining and Finishing Processes certification benefits the students by providing them details of the material removal mechanism that are involved in the different abrasive processes. In the Introduction to Abrasive Machining and Finishing Processes certification syllabus, the effects of various input parameters and the output results will be covered so that the students get to learn about the various cutting fluids.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Fundamental Of Welding Science And Technology

The Fundamental Of Welding Science And Technology certification course is being offered to the students by the Indian Institute of Technology, Guwahati. It is an online course which can be joined freely. Candidates who join this course learn about the traditional welding methods, applications, techniques, and other aspects related to the subject. The course works on the principles of self paced learning and thus students are allowed to have access to the course for a long period of time once they join the course. The study material is included in the programme so that students can get benefited from it and learn the concepts properly. The study material consists of case studies and assignments, etc. to help the students gain practical insights.

The Fundamental Of Welding Science And Technology certification also provides certification to the students which can be availed only after paying the exam fees. The exam will be held offline and the exam centres will be decided by the platform. The course does not need the student to spend a particular amount of time attending the classes every day. There is no limit to the access of the course. The programme is available for all the students for full time. The Fundamental Of Welding Science And Technology certification syllabus of the course takes 8 weeks to be concluded by the assigned mentor. Students are free to access the course even after the said duration is completed.

8 Weeks

₹ Free

Compare

Skills Covered:

Civil Engineering skills

Offered by

IIT Madras (IITM) , IISc Bangalore via Swayam +1

Certificate

Fundamentals of Combustion for Propulsion

The Fundamentals of Combustion for Propulsion programme is provided by the Indian Institute of Technology, Madras. The course belongs to the department of propulsion in the field of mechanical engineering. The users can avail of the course for free, and the programme is conducted in online mode throughout the whole duration. Participants will gain valuable insights into the working and optimization of propulsion and combustion by pursuing the Fundamentals of Combustion For Propulsion certification. The course is made for postgraduate students and the course can be joined at any given time since it is available the whole time on the website.

The programme will take up to 8 weeks to successfully finish the Fundamentals of Combustion for Propulsion certification syllabus. Students have the liberty to access the course according to their willingness. The course is available for the students full time. There is no admission procedure for the course and students can directly take admission in the programme. There is an option of certification in the Fundamentals of Combustion for Propulsion training for which students have to pay the exam fees and give an offline exam. The sessions provided in the course are made interactive for the students through case studies and discussions.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics

Offered by

IIT Tirupati via Swayam +1

Certificate

Introduction to Machining and Machining Fluids

The Introduction to Machining and Machining Fluids certification course is a self-paced learning programme imparted by IIT, Tirupati, and NPTEL. The course does not have any geographical limitations and is completely an online programme and deals with the subjects of mechanical engineering such as machining process and importance, manufacturing, etc. The course is provided to all the students at zero cost. The course comes with no deadlines and thus can be applied throughout its existence on the website. The estimated duration in which the Introduction to Machining and Machining Fluids certification syllabus can be completed in 8 weeks or 2 months. The course can be pursued anything as there are no restrictions regarding timings or maintaining an attendance percentage.

The Introduction to Machining and Machining Fluids programme offers certification if the candidate qualifies for the offline exam. Although the whole programme is available for free, the exam requires registration to be done by the students which comes at a price mentioned on the website. The course has flexible timings and students have full freedom to study from the course according to their choice and thus provides a self-paced learning experience. The platform offers the study material to the students along with the Introduction to Machining and Machining Fluids online course. Students can take extra time if they are not able to understand the concepts in the given time.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam +1

Certificate

Fundamentals of Material Processing-Part 2

The Fundamentals Of Material Processing - Part 2 certification course is designed for undergraduate level students which can be availed from the platform of Swayam at absolutely zero cost. The candidates who take admission in the course learn about the processing of materials, its designs, and outcomes. The programme is available for the candidates in online mode and can be applied as well as pursued from anywhere at any time. Candidates can have access to the Fundamentals Of Material Processing - Part 2 online course for free till it's existence.

The estimated time is taken for the Fundamentals Of Material Processing - Part 2 certification syllabus is 8 weeks or 2 months but participants are permitted to take more time if they want and there will be no extra payment for the option. The course provides the students with the study material of the course so that students do not have to get the notes from outside. Students can avail the certificate for the course through which they can get benefited in various ways. The Fundamentals Of Material Processing - Part 2 certification can only be obtained if the candidate passes the exam conducted by the platform in the offline mode.

8 Weeks

₹ Free

Compare

Offered by

IIT Roorkee via Swayam +1

Certificate

Principles of Casting Technology

The Principles of Casting Technology certification course aims to provide comprehensive knowledge of casting technology. This online training, developed by the prestigious Indian Institute of Technology, Roorkee, will introduce you to basic concepts of metal casting processes. Also, you will develop a sound understanding of the various properties of cast metals.

The Principles of Casting Technology online program by Swayam will give you detailed insights into the casting, melting, and molding processes for different types of alloys and metals. The course also discusses the various kinds of solidification, fettling, post-treatment, and heat treatment practices. You will understand how these practices impact the cast metals’ properties.

The defect diagnosis methods of casting components will also be taught in the program. The Principles of Casting Technology training is an eight-week-long extensive online course. During the course duration, you will become aware of the technological developments in casting methods and how these contribute to enhanced productivity.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Mechanical Measurement Systems

The Mechanical Measurement Systems program is a core course designed by IIT Roorkee. This program is an undergraduate and postgraduate-level course under the category of mechanical engineering and will be conducted over eight weeks. Prof Ravi Kumar from IIT Roorkee will be instructing the course.

The Mechanical Measurement Systems certification offers necessary information about statistical analysis of experimental data and mechanical measurement systems. The course introduces general functional and configuration elements of measuring systems. Candidates will also learn about the dynamic and static features of measuring instruments. Instrumentation of strain, torque, velocity, displacement, flow, sound, temperature, and flow measurements is also covered.

The Mechanical Measurement Systems training is spread over forty lectures which are approximately 30 minutes long. Candidates will have to answer practice assignments throughout the course and submit them for revaluation. There will be a final exam conducted for the e-certificate, and the interested candidates can appear for the same.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Mechanics of Machining

The Mechanics of Machining program is an elective course curated by IIT Guwahati The training will be covered over eight weeks and 20 lectures. The course explains the physics such as kinematics, statics, and kinetics of cutting procedures involved in metal removal processes called machining.

The Mechanics of Machining certification syllabus primarily comprises the study material from the textbook “Introduction of Machining Science” by G.K. Lal and various sources like journal papers and others. This online course discusses deformable body mechanics and its principles. Candidates will also learn about how these principles can be used to increase the performance of machine processes.

After understanding the basic principles covered in the Mechanics of Machining online course, candidates will gain insight into the complexity of machining. With such information and experimental knowledge, they will not only be able to build their own rules to optimize these processes but also conduct them through sustainable manufacturing techniques.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Mechatronics

The Mechatronics online course is an eight-week elective training. It is structured by IIT Roorkee with NPTEL approval and run by MHRT. The course is spread over forty 30-minute lectures and will be conducted by Prof Pushparaj Mani Pathak. Candidates will be given practice assignments throughout the course, and the ones interested can also answer the exam for the certificate.

Mechatronics training discusses mechanical engineering’s synergistic integration. This concept involves designing and manufacturing industrial processes and products with intelligent computer control and electronics. The students will learn about implementing electronic control and intelligent control in mechanical systems, especially to enhance their design and performance.

The Mechatronics certification syllabus includes mechanisms and actuators, signal conditioning, transducers and sensors, microcontrollers and microprocessors, system response and modeling, and design and mechatronics. The course has no prerequisites and is well-suited for UG or PG students in mechanical, electrical, and electronic engineering

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Processing of Polymers and Polymer Composites

Curated by IIT Roorkee, the Processing of Polymers and Polymer Composites programme classifies engineering materials and processes to produce polymers. From the initial to secondary processing stages, learners will know the challenges and opportunities linked as well. This AICTE-approved FDP curriculum aims at a postgraduate level of study by covering topics usually left out in undergraduate studies of polymer manufacturing.

The Processing of Polymers and Polymer Composites certification syllabus is spread across eight weeks. The concepts covered during this core programme include extrusion, thermoforming, compression, injection moulding, and transfer moulding. Course-takers will also solve numerical problems, submit assignments, and review case studies throughout the study.

Professor Inderdeep Singh from the Industrial Engineering and Mechanical Engineering department at IIT Roorkee mentors the learners. By paying an examination fee, students can sit for the certifying test. The Processing of Polymers and Polymer Composites certification requires learners to secure the minimum marks mentioned for the average assignment and proctored test scores.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Roorkee via Swayam +1

Certificate

Modelling and Simulation of Dynamic Systems

The Modelling and Simulation of Dynamic Systems certification course are spread over eight weeks and explains how the usefulness of the model depends on its ability to capture important physical features. The students here can highly benefit from the expertise of their course instructor, Dr. P M Pathak. They are a professor of the Mechanical and Industrial Engineering Department at IIT Roorkee.

The Modelling and Simulation of Dynamic Systems program is an AICTE-approved FDP course. Moreover, it falls under the domain of mechanical engineering and suits the needs of both undergraduate and postgraduate students alike. Learners are offered the practical experience of running simulations and solving the resulting equations.

The Modelling and Simulation of Dynamic Systems certification syllabus include various concepts ranging from system transfer functions and simulation to parameter estimation and state-space formulation. Besides, candidates can also acquire highly reputed accreditation. The e-certificate contains the student’s name, photograph along with the final score, and logos of NPTEL and IIT Roorkee.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam +1

Certificate

Nature and Properties of Materials

The Nature and Properties of Materials certification course throw light on all the smart materials employed in the construction and engineering of equipment used in civil, mechanical, aerospace fields. Candidates will also have an enhanced understanding of the selection criteria to be used in applications. The course is scheduled for a duration of eight weeks and falls under the broad domain of mechanical engineering.

The Nature and Properties of Materials online training have also been approved by the AICTE. The course is taught by Professor Bisakh Bhattacharya, who has currently associated with the Department of Mechanical engineering at IIT K. Post completion of the course, learners can be guaranteed of having an adept knowledge of the underlying principles and properties of materials.

The Nature and Properties of Materials certification curriculum have been curated, considering the varying academic needs of undergraduate students. Moreover, students can also obtain a highly reputed accreditation. The certification is sure to boost the employability prospects of the candidates by a great degree.

8 Weeks

₹ Free

Compare

Skills Covered:

Civil Engineering skills

Offered by

IIT Roorkee via Swayam +1

Certificate

Steam and Gas Power Systems

The Steam and Gas Power Systems program is an online certificate course under the discipline of mechanical engineering. The Indian Institute of Technology, Roorkee, has designed the course with the instructor, Prof Ravi Kumar. The Ministry of Human Resources, Govt. of India runs the program under NPTEL and AICTE.

The Steam and Gas Power Systems training revolves around applied thermodynamics. This includes the Rankine cycle, boilers, and high-pressure boilers, their performance, fuel combustion in boilers, steam flow through the nozzles. Candidates will also learn about steam turbines along with impulse reaction and gas turbines, axial and centrifugal compressors, and jet propulsion.

Moreover, the Steam and Gas Power Systems certification uses numerical to solve various problems to understand the course content better. This 8-week course is spread over 40 lectures, which are around 30 minutes in duration. Candidates can answer in-course assignments and appear for the final exam to receive the course certificate.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Advances in welding and joining technologies

Advances in welding and joining technologies certification is a two months course. This online programme has been made by the NPTEL and IIT Guwahati institutes who have chosen Swayam to be their provider partner. This online course is designed mainly to provide fundamental knowledge of the recent technologies involved in the process of welding, and joining. The certification course will embark upon the new material development that is used for the technological applications of welding, and joining.

Advances in welding and joining technologies training come with a syllabus that is oriented towards technological advancement, and its difference from the conventional methods involved in welding, and joining. The beginner level students will be presented with a simplified way of learning for free, and the participants will be developing an understanding of this programme through lectures and knowledge reinforcement through assignments.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam +1

Certificate

Basics Of Finite Element Analysis - I

Basics Of Finite Element Analysis - I certification is an 8 weeks course, the curriculum of which has been created with the help of NPTEL and IIT Kanpur. The provider which promotes the ad offers this certificate is Swayam. Talking of eligibility, the engineering students having completed 2 successful years of their B. Tech courses are eligible. This certificate course is for those who need to learn about FEA regarding their application.

Basics Of Finite Element Analysis - I training will give knowledge to participants on the theoretical aspects of finite element analysis. There are times when candidates do not understand the flawed results of them writing the wrong commercial codes. Hence this course is designed for making the applicants understand their mistakes of coding in easy mathematical ways. The course learning can be free, but the certificate requires being a part of assignments, and a proctored exam. Also, the end course certificate will be given value by industries like Power Generation, Automotive, NVH, Railways, Acoustics, etc.

8 Weeks

₹ Free

Compare

Skills Covered:

Mathematical skill

Offered by

IIT Kanpur via Swayam +1

Certificate

Design Practice - II

The Design Practice online course is an eight weeks elective program offered as an initiative by the government of India’s ministry of education through course provider Swayam. The course is designed for those who are new to postgraduate study in design. It might also be beneficial for aspiring professionals in the industry who want to pursue professions in the field of design.

The Design Practice syllabus covers solid modeling, 3-D shapes, Sensors and actuators, Introduction to Control, Mechatronics, Mechanisms, Strength, and Stiffness of Structural Elements, Micro-electro Mechanical Systems (MEMS), Geometrical Transformations, Rapid tooling, Rapid Prototyping, Intelligent Product Design, 3D printing, etc.

8 Weeks

₹ Free

Compare

Skills Covered:

Designing skills

Offered by

IIT Madras (IITM) via Swayam +1

Certificate

Fluid dynamics and turbomachines

The Fluid dynamics and turbomachines online course is offered by Swayam, a government of India’s initiative by the ministry of education. The first section of this 8 weeks course presents fundamental fluid dynamics principles, which serve as the theoretical framework for the second section of the program on turbomachines. The Fluid dynamics and turbomachines training is designed for advanced B.E/Technology students, as well as refresher training for working professionals in the turbine and pump sectors. The Fluid dynamics and turbomachines syllabus covers various topics such as fluid flows, turbomachines, and their principles, hydraulic and pump-turbine, gas and steam turbine, etc.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics Knowledge of engineering

Offered by

IIT Palakkad via Swayam +1

Certificate

An Introduction To Materials: Nature And Properties certification course is an eight weeks programme which is a presentation of NPTEL and IIT Kanpur. These institutions have established a partnership to deliver this course with Swayam. The topics focused on the programme shall be crystallography, its symmetry, the structure of alloys, defects of these materials, and more.

An Introduction To Materials: Nature And Properties (Part 1: Structure Of Materials) training is taught online and gives a broader introduction on the nature of materials that can be suitable for both undergraduate and postgraduate students who have studied science or engineering. This course comes free for learning, but earning certificates needs around rupees one thousand for the final examination. The certification after completion shall be supported and assisted by the companies that are dealing with materials.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam +1

Certificate

Corrosion - Part II

The Corrosion - Part II course is a continuation of the course Corrosion Part-1 by Swayam. The course delves deeper into the phenomenon of corrosion, from different corrosion events to corrosion-based experiments. Another crucial aspect that this course focuses on is the mixed potential theory used in electrochemistry.

In addition, the Corrosion - Part II programme talks about the different methods of conversion, as well as methods of protection from corrosion. Students will get to learn about the oxidation of alloys and metals in detail. This is an excellent opportunity for candidates who are interested in Metallurgy and electrochemistry to learn about the subject of corrosion, free of cost.

Furthermore, the 8-week online Corrosion - Part II course allows the students to earn an E-certificate upon successful completion of the course. IIT-Kanpur and NPTEL will also accredit the certificate, so it will help improve your professional prospects in the future.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics Knowledge of Metallurgy

Offered by

IIT Kanpur via Swayam +1

Certificate

Defects in Crystalline Solids (Part-1)

The Defects in Crystalline Solids (Part-1) programme by Swayam is a course that aims to give its candidates a broad understanding of the defects in materials and their function in determining the properties of the materials. The students will gain a thorough understanding of crystals and their structures, along with plastic deformation mechanisms.

Taught by Professor Shashank Shekhar from IIT Kanpur, the Defects in Crystalline Solids (Part-1) course is an undergraduate-level course under the Metallurgy and Material Science and Mining Engineering category. It is intended for first-year graduate students who have a prior idea about thermodynamics and undergraduate-level mathematics.

It will take approximately eight weeks to complete the Defects in Crystalline Solids (Part-1) programme. It is a 100% online course and the course material can be accessed for free upon enrolment. The course is replete with video lectures, specially prepared reading material that can be downloaded and printed by the candidate, and in-course tests and assignments.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics

Offered by

IIT Madras (IITM) via Swayam +1

Certificate

Theory and Practice of Non-Destructive Testing

Non-destructive testing is an integral part of quality control, structural health monitoring, and flaw detection. It has many applications in industries related to manufacturing and production. Theory and Practice of Non-Destructive Testing program is an undergraduate/postgraduate course that will teach you about various NDT methods in depth.

Theory and Practice of Non-Destructive Testing certification is an online MOOC. It provides a comprehensive overview of NDT methods, starting with the basics and the underlying principles and concluding with specific NDT methods process details. There will be periodic assignments and an optional offline exam to help you evaluate your progress.

Theory and Practice of Non-Destructive Testing online course is curated and designed by IIT Madras. It is eight weeks long and comes under Materials joining, Metallurgy and material science, Mining engineering, Manufacturing processes, and technology. The course also offers certification. It is an elective course approved by AICTE as an FDP course.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Introduction To Crystal Elasticity And Crystal Plasticity

An 8-week online course is provided for the Introduction to Crystal Elasticity and Crystal Plasticity Certification. Even if Swayam is contracted to teach the course, IIT Guwahati creates and approves the course syllabus. The organisations that issue this course certificate are NPTEL and the Indian Institute of Technology, Guwahati.

The Introduction to Crystal Elasticity and Crystal Plasticity Certification course is an 8-week online program. The course syllabus is prepared and authorized by the IIT Guwahati, even if Swayam is hired to deliver the course. The Indian Institute of Technology, Guwahati, and NPTEL are the organisations that grant this course certificate.

Introduction to Crystal Elasticity and Crystal Plasticity training is a part of the Metallurgy and Material Science & Mining Engineering elective curriculum. Swarup Bag is the instructor of this certification course.

The objective of this course is to fill the knowledge gap between material science and continuum mechanics, where phenomena are defined at diverse length scales. The course focuses on essential concepts of the relevant topics by studying the mechanical properties of typical metals and alloys via mathematical and physical challenges.

8 Weeks

₹ Free

Compare

Offered by

IIT Kanpur via Swayam +1

Certificate

Corrosion - Part I

The Corrosion Part-1 Certification course is an 8-week online program. The course syllabus is prepared and verified by IIT Kanpur even if Swayam is appointed to provide the course. This course certificate is presented by the Indian Institute of Technology, Kanpur, and NPTEL.

Corrosion Part-1 training is a part of the Metallurgy and Material Science & Mining Engineering core curriculum. This certification course is taught by Kallol Mondal.

The principles of corrosion are emphasized in this course from the perspectives of thermodynamics, like its process at the interface, free energy, and electrochemical potential, and the kinetics of electrochemical processes, like activation, concentration, and resistance polarization; various types of corrosion associated with materials; mixed potential theory; and electrochemical methods of safeguarding metals and alloys.

8 Weeks

₹ Free

Compare

Exams

Colleges

Predictors

Resources

Quick links

Exams

Colleges & Courses

Predictors

Resources

Exams

Colleges

Predictors & E-Books

Resources

Engineering Preparation

Medical Preparation

Law Preparation

MBA Preparation

Exams

Colleges

Resources

Exams

Colleges

Predictors & Articles

Resources

Exams

Colleges

Predictors

Resources

Exams

Colleges

Upcoming Events

Resources

Exams

Colleges

Resources

Quick Links

Top Streams

Specializations

Resources

Top Providers

Exams

Colleges

Resources

Diploma Colleges

Exams

Colleges

Resources

Exams

Resources

Top Courses & Careers

Colleges

Exams

Upcoming Events

Resources

Other Exams

Exams

Colleges

Top Countries

Resources

Exams

Top Schools

Products & Resources

NCERT Study Material

NPTEL Courses & Certifications 2025

Credential

Course Type

By Date

Program level

Provider

Duration

mode of Study

Course Fee

Payment Options

Course Level

Certificate availability

Language

Which credential are you looking for?

Articles

Popular Articles

Latest Articles