Online Engineering And Architecture Courses & Certifications

Human-Robot Interaction is the course provided by the University of Canterbury on the EdX portal for learners who are interested in building their future in robotics. The online self-paced course aims for the overall development of the learner. The candidate shall be exposed to the concepts like human-robot interaction and the latest research methods in this field. This is a comprehensive course that aims for the overall development of the learner. The candidate shall be learning about Human-Robot Interaction and drones. 

Human-Robot Interaction training shall be delivered by industry experts through online self-paced videos. The course comprises videos and lectures on how to design the robots and the technology adopted for the same. Students and researchers from robotics, computer science, psychology, sociology, and design will find it a concise and accessible guide to the current state of the field. This is a 14 weeks course during which the candidate should give 5-10 hours per week. The candidate shall also receive Human-Robot Interaction certification by EdX after the completion of the course. If the learners pursue the programme for free, they will have a limited duration of access to it. 

The Advanced Certificate Program in CFD-Aircraft Aerodynamics course is designed for engineering graduates and postgraduates from mechanical and aeronautical departments. The curriculum of the programme is designed by industry experts. The online course is provided to all the interested students by the Ramaiah University of Applied Sciences, Bangalore. The learnings of the course are provided to the students through the study material available in the programme. The Advanced Certificate Program in CFD-Aircraft Aerodynamics syllabus consists of three different modules that further involve different theoretical and practical aspects. Students can finish the entire curriculum within three months. Since it is a self-paced course, students can pursue this course according to their schedule. The Advanced Certificate Program in CFD-Aircraft Aerodynamics online course provides certification at the end of the programme to the students.

IC Engine Calibration using GT-POWER and GT-SUITE course is being imparted by Skill Lync to provide the learner's knowledge about calibration of IC engines. Skill-Lync provides industry-relevant courses for engineering students with the help of industry experts. Diesel and gasoline engines have great amounts of potential for combustion refinement. 

Achieving high fuel efficiency combined with good performance and drivability is important but so is focusing on the lowest possible engine-out emission. All of this depends upon calibration studies. GT-POWER and GT-SUITE are a part of the system-simulation domain as it uses sophisticated algorithms to solve fluid flow equations in composite electromechanical systems. 

Participants will learn about the importance of calibration studies and their fundamentals and the methodologies behind the calibration of IC engines. This course will be beneficial for students who aspire to develop their career as a calibration engineer targeting internal R&D projects, product development/systems development engineer, IC engine calibration engineer, or 1D-3D thermodynamic system simulation engineer. 

In this era driven by technology, there have been significant improvements in business operations, resulting in the boosted performance of various industry sectors and segments. The civil engineering field, in particular, has been blessed with computer-aided drafting, which is more accurate, less time consuming and cost effective in nature. AutoCAD is one such computer-aided designing software which has assumed great significance in the field of civil engineering as well as architecture.

AutoCAD is being preferred by the majority of global civil engineering companies for drafting designs and building projects. With a plethora of in-built templates, design layouts and other packages of CAD, AutoCAD is highly advantageous to work with. The transition between 2D and 3D models coupled with standardization, AutoCAD is a time-saving and cost-reducing tool available for civil engineers.

The AutoCAD Essentials for Civil Engineer course offered by Skill Lync is specially designed for students, working professionals and employees of civil engineering companies with an aim to disseminate essential tools, concepts, applications and commands of AutoCAD software; to draft and design projects. The course involves pre-recorded learning videos, real-world industry-relevant projects and certificate of completion as well as merit.

"Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads" is a short-term online course provided by Skill Lync that is specifically made for civil engineering students. Land in the urban areas is shrinking, and so it must be ensured that the high-rise buildings are both economical, and safe.

This "Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads" Certification Syllabus includes structural analysis and reinforced concrete design. RC & Steel buildings with a special focus on ETABS and SAFE software for designing code-compliant structures.

Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for the Seismic Loads Certification Course will help candidates build a solid professional portfolio by upskilling. And, showcasing this certificate of completion to the learner’s resumes or CVs will have a positive effect on their future career by getting themselves jobs.

The BIM in AEC Industry using Revit Certification Course is a 3 month long specialised course available on the Skill-Lync platform. The online course will educate learners about the fundamental features of BIM processes in the Architecture, Engineering, and Construction (AEC) industry.

The BIM in AEC Industry using Revit Training Course will provide learners with industry-specific knowledge and expertise of Revit tools that handle digital models. This course can be taken up by civil engineering aspirants who wish to learn about the theoretical and practical applications of BIM in the AEC industry.

After attending the BIM in AEC Industry using Revit Live Course, all learners will be rewarded with a certificate of completion and 5% of learners will get a chance to win a merit certificate. The course will be supported by online videos, technical projects, and a well-structured curriculum.

The Analysis and Design of Industrial Structures using STAAD.Pro certification is an online 3 months programme that is prepared, produced by SKill Lync. This course gives a comprehensive idea of industrial steel structures that gives a general overview of a steel building’s structural systems. Here each element exposure to design, and material specification is explained to the students with the use of the Limit State Design method based on IS 800: 2007.

The Analysis and Design of Industrial Structures using STAAD.Pro training gives deep-rooted exposure to  STAAD Pro which is a software that enables every student to analyse, model, and then design an industrial structure. Another focus of this course is especially on the Pre Engineered Buildings and Pipe racks with the help of case studies. The different steps that get involved in designing substructures are also taught to these participants that will give them a fulfilling idea on industrial designing.

The Introduction and Applications of Hydrologic Engineering Center’s- River Analysis System (HEC-RAS) is a study about the various uses of open channel hydraulics, which includes flood hazard mapping, roadway crossing analysis, and the designing of bridges. This civil engineering software-oriented program is provided by the online education platform Skill Lync. The course is conducted for three months and the students of this program will learn to analyze river models and their behavior with the help of HEC-RAS. 

The course curriculum involves the students working with the HEC-RAS software on two experimental projects and other software like AutoCAD, QGIS, HEC-HMS, MS-EXCEL. The candidates of the program are ensured with the theoretical knowledge of the modeling potential, drawbacks, and tools of HES-RAS. The course also offers practical insights on rivers Bridge & Culvert modeling, Road crossing with presentations, and problem-solving on computing floodways, flood fringe volumes that are also associated with bridges and culverts which are discussed during the online training. 

The Construction Planning using Primavera P6 Training Course is a 3-month long online course that focuses on the key aspects of construction planning, management, and implementation using Primavera P6. The course is available on the Skill-Lync platform is suitable for those interested in the civil engineering domain.

Through the Construction Planning using Primavera P6 Course Certification Course, learners will be introduced to topics like project planning, project management along with the software Oracle Primavera P6. The course can help learners build a career in the field of project management.

After completing the Construction Planning using Primavera P6 Live Course via expert course videos, industry-oriented projects, and other assessments, learners will be rewarded with a certificate of completion and the top 5% of the class will get a merit certificate.

The BIM Ready (Architecture) Live Course is an online course that focuses on the contemporary architecture and construction industry by exploring the working of Building Information Modeling (BIM) and Computer-Aided Design (CAD). The course equips learners with advanced software skills to excel in the field. The course is aimed at professional architects and students of architecture.

The BIM Ready (Architecture) Training is provided through e-live classes, live projects, and a hands-on learning system. The course led by BIM experts teaches learners about the role of BIM and CAD in technical, architectural, and structural spheres. Upon successful completion, candidates will receive a course certificate. The BIM Ready (Architecture) Certification by Techno Struct Academy provides learners with placement opportunities in MNCs.

The ‘BIM Ready (Structural)’ online course is offered for the students to upskill themselves with the knowledge of concepts and frameworks of building information modeling. The students are given a chance to explore the field of structural engineering by learning more about the technicalities associated with design and structure. This certification course is provided by TechnoStruct Academy for a duration of forty-five days with thirty hours of online classes and thirty hours of hands-on sessions. 

The students of this course will get practical experience with the software tools such as AUTO CAD 2D & 3D, STAAD Pro, REVIT Structure, DYNAMO, NAVISWORKS, Autodesk BIM 360, Scan to BIM associated with structural engineering and BIM which build industrial competence in them. The candidates also get advantages of internship privileges and professional skillsets.

The ‘BIM Ready (Structural)’ online certification course equips students with the course completion certificates after finishing the course study with the expertise to become a BIM structural engineer. 

The field of electronics has constantly been evolving and has witnessed morphological changes with the latest technologies. After the integrated circuit was invented, a new trend in the field of microelectronics set in. It leads to the miniaturisation of a lot of components like computers, mobiles, and laptops. The Advanced Certificate Program in VLSI System Design by MS Ramaiah University of Applied Sciences, Bangalore is a course that highlights and demonstrates the use of VLSI system design in integrated circuits.

The Advanced Certificate Program in VLSI System Design certification syllabus will guide learners through practical and theoretical concepts to undertake various roles in IC designing.

The Advanced PCB Design Using Altium ECAD Software online course is offered by the online education platform Skill Lync as a part of the electrical engineering courses developed by them. The tool focussed course is scheduled for three months for the students and graduates of electrical and electronics engineering. This skill development programme is a study about the Printed Circuit Boards(PCBs)  found in electronic gadgets which have become an indispensable part of our day-to-day lives. These printed circuit boards are responsible for the electrical activity between the components and for mechanical assistance.

The software tool used in this course is an electronic design software and the most powerful high-end tool utilised to design PCBs. The professionally qualified course educators and the projects enable students to gain an in-depth understanding of the concepts and ideas through the theories and practical applications of principles associated with printed circuit boards designs. 

Fundamentals of DC-DC Converters using MATLAB and Simulink certification is a 3 months course that is designed online to help professionals gain knowledge of DC-DC Converters, and make models with the help of MATLAB and Simulink. This course will enable people to understand why, and how  DC-DC converters are a necessary evil for both mechanical, and electrical engineers.

Fundamentals of DC-DC Converters using MATLAB and Simulink training will provide in-depth analysis, design, and modeling of non-isolated DC-DC converters. The students will hence design and illustrate the DC-DC converter application. They will also undergo different kinds of simulation using MATLAB, and Simulink. This course covers the basic principles of function and Bode plot. This certification programme will also help the learners in designing the converter of separate applications. The details covered under the rectifier circuits of this course will be helpful for tackling the challenges that arise in power electronic industries. 

Hybrid Electric Vehicle Simulation Using GT-SUITE certification is 3 months programme with variable course access depending on the course package pricing basic, pro or premium.  Vehicles with IC engines have these days become a requisite for everyday life. The only downside of these vehicles is harmful emissions. There has been a great amount of research that takes place in this sector, hence this course will be a guiding lamp for the participants wanting to study the GT-SUITE software.

Hybrid Electric Vehicle Simulation Using GT-SUITE training is given based on the development of hybrid vehicles that have been developed keeping in mind the electric emissions to save the environment. This certificate course has been made by Skill Lync that provides fundamental knowledge of HEV development before one can dig deep into it.

The Hand-Held Products certification course is a 3 months short one designed by the Institute For Design Of Electrical Measuring Instruments, IDEMI extension center Bangalore. The course has been backed by Samsung Technical School which is a collaboration of the Ministry of Micro, Small & Medium Enterprises (MSME), and Samsung India. This program caters mainly to students who have any degree or diploma, or have completed a minimum education of class 12. 

The Hand-Held Products training can be completed by paying a very nominal program fee. Alongside the course content, the institute IDEMI also provides special on-the-job training for a month. This training is usually offered in the Samsung Service Centre. The candidates will have a varied knowledge of how exactly all smartphones can be repaired with ease.

The VLSI: Basics of Digital Electronics Online Course is a specialized course that explores the different aspects of Very-large-scale integration (VLSI) and digital electronics. The course offered on the Skill-Lync platform will help learners understand the advanced techniques of logic and design in consumer electronics.

Through the VLSI: Basics of Digital Electronics Certification Course, learners will be introduced to design verification techniques and fundamental aspects of digital electronics. The course will assist learners with the technical knowledge and skills required to become a front-end engineers.

After completion of the VLSI: Basics of Digital Electronics Live Course, learners will be rewarded with a certificate of completion and the top 5% of learners in a class will receive a merit certificate.

Electronic Cooling Simulations using ANSYS ICEPAK course is being offered by Skill Lync to give the learners an opportunity to understand the concepts of computational fluid dynamics. Skill-Lync is a platform that provides industry-oriented advanced engineering courses for engineering students by collaborating with industry experts. ANSYS ICEPAK is a powerful CFD suite, which enables multi-physics coupling between thermal, electrical, and mechanical analyses for electronics design. 

It is combined with thermal–stress analysis, ANSYS Workbench for coupling with MCAD, with ANSYS Mechanical, and advanced post-processing through ANSYS CFD-Post. Through this course, participants will learn the procedure of providing effective cooling, modeling and treating the electronic systems manually on ICEPAK. 

They will gain knowledge about the ANSYS ICEPAK software and SpaceClaim software. SpaceClaim helps in building CAD models for CFD analysis and converts them into CAD shapes. The course covers various aspects such as physics of the problem, thoughts on simulation method, problem setup and boundary conditions, visualization to quantitative post-processing, results, and meshing of geometry. 

Finite element analysis is used across all engineering disciplines. The Finite Element Analysis programme is designed to help students understand how it is utilised by engineers today. If you would like to know how to solve any complex engineering problem by dividing the component into smaller parts, you would greatly benefit from this course.

Through the Finite Element Analysis training, you will learn how finite element analysis helps troubleshoot old designs and evaluate the feasibility of new ones. Additionally, you will deepen your knowledge of finding solutions at times when you lack a prototype.

With the use of Hypermesh and Ansys for finite element analysis, as well as the use of CATIA for geometric modelling, you can solve any engineering problem. The Finite Element Analysis certification course teaches you how to do just that. 

Upon finishing the course, you will earn a certificate and be empowered enough to carry out independent analysis, no matter what engineering problem you set out to solve.

The Advanced Turbomachinery Simulations using CONVERGE Certification Course offered by Skill Lync provides extensive training to learners in three months regarding computational fluid Dynamics theory and its application in internal flows. The course lays special focus on simulating the superchargers, centrifugal pumps, and turbochargers. 

Problems and assignments posed in this course would strike the brains of learners and drive them to think over and understand important concepts like where the fluid separates and how fluid flows through turbomachines, apart from a comprehensive insight into a recirculation zone where it gets generated. The faculty will also engage in active discussions regarding the plot performance curve for different applications, besides answering how the shape of outlet runners and the shape of blades affect the results. 

The opportunity to work on software like Converge will be convenient and robust, given that the meshing is automated, leading to saving a lot of time and effort. Skill Lync will offer various other complementary services including resolution of doubts via email and Whatsapp. Finally, candidates will attain deep-rooted knowledge of important theories revolving around the concepts of Cavitation, Turbulence (RANS), and CHT.

When seeking the right course which would holistically cover the application of computational fluid dynamics theory (CFD) simulating HVAC applications, this Certification Course on HVAC Systems Flow Analysis using Converge is the answer. Apart from discussing the relevant domain, it also briefs upon relevant aspects of the impact of CFD on internal flows. Its special focus on HVAC applications like superchargers, cold aisle for data centre, hot aisle, heat exchangers, and turbochargers provides candidates with an elaborate description of the technical know-how. 

This course introduces students to exciting software to work on, CONVERGE STUDIO being the primary one. Besides this, they will also gain hands-on experience with ParaView to post-process the results and CYGWIN/CMD to run the simulation. Projects spread throughout the course engage the students with the curriculum and enforce the ideas of analysis of HVAC systems flow in learners through the same.

Experts possessing years of experience in this industry will teach important concepts including the method of fluid movement through HVAC applications. This shall also involve sub-concepts of locating the recirculation zone after the fluid is separated. The theory behind cavitation, turbulence (RANS), regions, and interfaces is an additional offering.

The Solar Energy online course is an eight-week course offered by the Delft University of Technology- one of the largest technological universities in the Netherlands. This introductory course explores the different technologies, and principles underlying photovoltaic conversion, solar module constructions, and solar cell fabrications.

Students will receive an online ebook “Solar Energy- Basics, Systems, and Technology” at no extra charge for learning. The Solar Energy Certification Syllabus assigns one topic per week, replete with assignments, exams, exercises, and lecture videos. Moreover, this online course focuses on electricity generation from solar energy. The latest advancements in solar technology such as crystalline silicon, thin films, and other lab-scale examples are also covered.

Mr. Arno Smets from the Delft University of Technology instructs the course. He was the first recipient of the Exceptional Contributions by edX to online teaching and learning. Mr. Smets teaches Computer science, electrical engineering, and mathematics. Lastly, a verified Solar Energy Certification is also available to learners after completing the program and may a minimal required fee.

The candidates may enroll in this course for free or by paying a certain amount of money. There are 2 tracks namely verified or audit track which offers direct access to the course materials. If the candidates opt for the verified mode they are entitled to unlimited access and if they opt for the audit access, they are going to receive only limited access to the course materials.

The Advanced Certificate Program in Computer-Aided Design certification course is offered to the students by the Ramaiah University of Applied Sciences. The course is designed for engineering graduates. Candidates who apply for the programme will be able to learn different aspects related to computer-aided design, such as geometric models, prototype building, engineering drawing, etc. The Advanced Certificate Program in Computer-Aided Design syllabus includes 3 modules, and every module takes up to 4 weeks to get completed. So, the entire curriculum can be completed within three months. The course is self-paced and can be accessed in online mode. The Advanced Certificate Program in Computer-Aided Design online course also includes laboratory work and projects along with the theoretical aspects. Students who complete the course get a certificate at the end of the programme.

The Introduction to Model-Based Development using MATLAB and Simulink course is a comprehensive study of model-based development. It is an embedded software development technology realized using MATLAB- a versatile and powerful programming platform. The course focuses on the Advanced Driver Assistance Systems (ADAS), which is an electronic system used to ease the process of driving.

The Skill Lync Introduction to ADAS using MATLAB and Simulink training will make you proficient in model-based development and Advanced Driver Assistance Systems (ADAS). You will have an edge in concepts like Model in Loop Testing (MIL), auto code generation, Software in Loop (SIL) Testing, and development of an ADAS feature from scratch. 

Apart from the high-quality video lectures mentored by industry experts, the Introduction to Advanced Driver Assistance System using MATLAB and Simulink online training also provides industry-based projects. It will help you apply the newly acquired concepts and knowledge. Skill Lync offers a course-completion certificate to candidates finishing the curriculum. Also, students who manage to hold a position in the top 5 percent of the batch receive a merit certificate.

The Development of Hybrid Drives using MATLAB & Simulink online course is offered by the online education provider Skill Lync for the engineering students to improve their skill and knowledge in the automotive domain. This online programme on hybrid drives is scheduled for eight months which includes course modules and industrially relevant projects that ensure the skill development of the course participants.

The course study includes exploration of the concepts based on the hybrid electric powertrains, the various kinds of constructions for today and tomorrow, the present modes, the designing and model techniques for powertrains, and the strategies involved in simulation associated with such power trains and hybrid electric vehicles. This online training delves into the complex design structures of hybrid electric vehicles and enables the learners to understand the scope of hybrid electric vehicles in the automotive industry. The professionally qualified course educators and experimental teaching methodologies through projects that deal with modelling procedures while working with MATLAB and Simulink provide a wholesome learning.

The Electric Motor Design using MATLAB and ANSYS Maxwell certification is a 12 week course. This course has been hand-made and presented by the Skill Lync platform. Before the actual course starts, there is a demo session that can help all the students enrol in this course with their vision being clear. This course is the most ideal for mechanical engineers wanting to design electric motor vehicles.

The Electric Motor Design using MATLAB and ANSYS Maxwell training is capable of teaching the candidates to convert electrical energy into mechanical energy for bringing about the desired motion. The candidates can make use of MATLAB and ANSYS Maxwell software in drilling machines, pumps, and more by understanding the vehicle components of Battery & Motor. The main focus of this course by Skill Lync usually establishes a focus on all the components of electric motor designing.

The Automotive Systems and Controls using MATLAB/Simulink certification is a 3 months course that introduces students to how Simulink and MATLAB can be used in the case of automotive systems along with their control. This course will help participants to attain the objectives desirable with a control system.

Suitable for novice or experienced engineers the Automotive Systems and Controls using MATLAB/Simulink training for getting research in the industry related to different kinds of projects, and exercises. These will improve the brain of the participants for implementing the skills based on hypothetical situations. When this programme ends, the participants will become completely ready to face issues that arise from control systems. Also, a sales consultant will be helping the participants to gain confidence to pursue this course and get recognized by globally acclaimed organisations.

AC-DC Rectifiers, Harmonics, and Related Standards using MATLAB and LTspice certification is a 3 months online course by Skill Lync that comes with different fee structures based upon the access timing of the course. The one with lifetime access has the highest fee of Rs. 15,000. The applications of this course are included in popular electronic devices in daily lives like TV, charging circuits, audio amplifiers, mobile phones, etc.

AC-DC Rectifiers, Harmonics, and Related Standards using MATLAB and LTspice training help engineers understand why the backbone of electronic power systems is the AC-DC rectifiers. Since AC or DC converters use is increasing rapidly, the professionals will essentially understand this certificate course to know the thorough working of AC-DC converters. During the coursework, all the participants shall be curating simulation circuits using software like LTspice, and MATLAB. The working projects will be putting the student’s theoretical knowledge to use in practical life.