Online Engineering And Architecture Courses & Certifications

The Computer Vision online course is a 12 weeks elective program offered by Swayam under an initiative by the government of India. The Computer Vision training covers a range of topics such as 2-D Projective Geometry, Stereo geometry, and Camera geometry. The Computer Vision syllabus includes an in-depth study of imaging geometry theory and computation, as well as scene comprehension. It will also expose learning candidates to classification, clustering, and deep learning techniques that are used in this field.

The Basic Electrical Circuits online course is a 12 weekly certification program offered by Swayam, an initiative by the government of India. Electrical circuits may be found everywhere, from microscopic ones in integrated circuits found in music players and mobile phones to massive ones that light our houses. 

This Basic Electrical Circuits training includes analytical techniques that may be applied to many types of circuits. The course starts by talking about electrical variables like current and voltage that are important elements in a circuit, and then covers fundamental elements like R, L, C, and controlled inputs and their characteristics. 

The Basic Electrical Circuits syllabus covers generic analysis methods that may be used on any circuit. The syllabus includes circuit theories and the fundamentals of a bad feedback circuit using op-amps. Following completion of this course, students should be able to evaluate memoryless linear circuits.

The Control and Tuning Methods in Switched Mode Power Converters online course is a 12 weeks program offered by Swayam. Switch-mode power converters (SMPCs) are critical components in energy-efficient power conversion in developing applications such as electric cars, renewable energy, data centres, industrial automation, and so on. In this context, selecting appropriate modulation and control techniques for SMPCs is critical in order to fulfill demanding criteria such as efficiency, transient performance, line, and load management, disturbance rejection, etc. The Control and Tuning Methods in Switched Mode Power Converters training cover all the associated topics and techniques.

While the bulk of commercial regulator implementations are focused on small-signal analysis and pulse width modulation, rising switching frequencies, which are linked in part to bandgap devices, allow for increased operational bandwidth and improved performance. This Control and Tuning Methods in Switched Mode Power Converters syllabus give an introduction to traditional control and modulation methods, highlights small-signal performance constraints, compares controller tuning methodologies, and examines large-signal control approaches. The analysis of tuning approaches demonstrates how large-signal-based classification tuning methods may greatly enhance SMPC efficiency and performance, followed by the requirement for mixed-signal and digital control implementation.

Enzymes are essential components of the biological system. Enzymes are biological catalysts that catalyze a wide range of metabolic processes that keep life going. Enzymes aid in the process of life in all living forms, from prokaryotes to eukaryotes. As a result, studying enzymes is critical to understand the molecular foundation of life.

Basic concepts in Enzymology training is an introductory program designed for undergraduate students majoring in Biotechnology, Biochemistry, Microbiology, and other life sciences such as Zoology and Botany. Basic knowledge of biological catalysts can lead to new paths of multidisciplinary research. This program would also serve as a basis for further Enzymology study.

The Basic Concepts in the Enzymology syllabus are intended to expose students to different theoretical and practical elements of enzymology. This course covers key points such as nomenclature and enzyme classification, the factors influencing their activities and the mechanism of enzyme action, enzyme kinetics, enzyme regulation, enzyme inhibition, purification, enzyme isolation, and various clinical and industrial applications of enzymes. The program will be divided into tutorials, lectures, and discussion/interaction sessions.

The Biological Inorganic Chemistry online course is offered by Swayam and counts 3 credit points according to Choice Based Credit System (CBCS) by UGC. Metal ions' have exceptional importance in biology, health, illness, and medicine has been increasingly clear during the last 30 years or so. The Biological Inorganic Chemistry training teaches about coordination compounds of metal ions that help to understand the inorganic components of biological and life processes. The biological system's metal ions can only be understood through a multidisciplinary approach. The biological Inorganic Chemistry syllabus broadly covers metal ions, it remains at the continually expanding intersection between the biological world and inorganic chemistry. It is becoming increasingly clear that some metal ions have a role in cellular and subcellular activities.

The C-Based VLSI Design online course is a 12 weeks program offered by Swayam, an initiative by the government of India. The online elective course includes 3 credit points. This course covers how to use high-level formulation to automatically transform a C code into a register transfer level (RTL) design using HLS. In recent years, HLS has been an important research topic in the realm of VLSI Electronic Design Automation (EDA). 

This C-Based VLSI Design training will teach students how to comprehend the overall HLS flow, how to transform C-code to its corresponding hardware, how to design C-code for effective system generation, and how software application compiler optimization may assist to enhance circuit efficiency.

The C-Based VLSI Design syllabus includes advanced topics like HLS for Security, HLS for FPGA targets, HLS verification, and RTL optimizations difficulties will be discussed. This course will prepare the candidate to do research in the field of HLS. This program will also assist the student in becoming adept at the EDA industry.

The Chemical Process Intensification online course is a 12 weeks program offered by Swayam, an initiative by the ministry of education, Government of India. This course examines the advancements in a variety of enhanced technologies, with a focus on the use in chemical processes. The Chemical Process Intensification training is designed to be a valuable resource for practising chemists and engineers who are interested in using enhanced separator and/or reactor systems in the chemical industry. The course offers engineers and chemists who are unfamiliar with the principles of chemical engineering and process intensification a rudimentary understanding of these topics.

The Chemical Process Intensification syllabus is an invaluable resource for chemical engineers who want to use their knowledge in separation and reaction engineering to the formulation and construction of green processing techniques based on system intensification concepts. Students enrolled in undergraduate and postgraduate degree programs that address advanced reactor processes and design intensification will get a better grasp of practical applications in various fields.

The Computational Complexity online course is a 12 weeks program offered by Swayam, an initiative by the government of India’s Ministry of Education. This Computational Complexity training provides an overview of computation complexity. Various computational complexity classifications and computing models are covered in the course. Computational models quantify many elements of computing such as space, time, unpredictability, amount of communication, number of gates, and so on. According to these many theories, the complexity categories classify distinct computational tasks based on their ease or difficulty. The Computational Complexity syllabus also covers how these complexity classifications are connected to one another. Several of the outcomes are quite interesting and make use of a variety of intriguing ideas.

The Computational Continuum Mechanics online course is a 12 weeks AICTE approved program provided by Swayam under an initiative by the government of India. Continuum mechanics is a fascinating but difficult subject. The subject includes nonlinear finite elements which are usually unclear to the learner. Computational continuum mechanics training attempts to fill this void. As a result, it may be thought of as an applied form of a continuum mechanics program. It is assumed that candidates have no prior knowledge of continuum mechanics. The course begins with a solid foundation in kinematics, tensors, and kinetics.

The Computational Continuum Mechanics training includes various principles to establish the constitutive relations for the basic hyperelastic material analysis of nonlinear finite elements. Following that, the linearization of the weak version of the equilibrium equations is described and discretized to get the finite element equations, namely the residual vectors and tangent matrices. The Computational Continuum Mechanics syllabus includes the Newton-Raphson solution process, as well as arc length methods and line search for improving the solution procedure.

This Computational Electromagnetics online course is designed for senior undergraduates and first-year graduate students who have completed a semester in Engineering Electromagnetics. The Computational Electromagnetics training provides mathematical formulations of the primary methods now in use by the various communities: Finite Element Method, Integral Equations Methods, and Finite Difference Time Domain Method. These approaches are demonstrated by their application to scattering and impedance calculation/antenna radiation issues.

The Computational Electromagnetics syllabus covers calculating mutual coupling between antennas, Introduction to inverse problems, determining the electromagnetic patterns of a waveguide, the Integral Equation Method, and approaches for combining the Finite Element Methods. Programming problems encountered during the implementation of these solutions will also be discussed.

The Computational Fluid Dynamics online course is a 12 weeks program offered by Swayam, an initiative by the Ministry of Education, Government of India. CFD, or computational fluid dynamics, is a subfield of continuum mechanics concerned with the simulation analysis of heat transfer and fluid flow issues. The Computational Fluid Dynamics training covers analytical solutions to various differential, integral or integro differential models found through mathematical modelling of any continuous issue confined to basic geometries.

Analytical solutions cannot be derived for the majority of cases of practical importance, and a numerical method must be used. Computational Fluid Dynamics syllabus covers the technique of getting approximate numerical solutions using digital computers in the subject of mechanics. Computational Fluid Dynamics refers to the same approach for thermo-fluidic issues. CFD is concerned with providing an approximate analytical solution to the continuity equation focused on the basic conservation laws of momentum, mass and energy.

The Computational Fluid Dynamics using Finite Volume Method online course is a 12-week FDP program offered by Swayam, an initiative by the government of India. The Computational Fluid Dynamics using Finite Volume Method training includes convection-diffusion, solution and discretization of diffusion and incompressible fluid equations. Each of the equations is discretized using the finite volume approach. The discretization and solution algorithms are written for both unstructured and structured models. The Computational Fluid Dynamics using Finite Volume Method syllabus covers hand computations on basic models as well as numerical coding of the algorithms.

The ‘Drug Delivery: Principles and Engineering’ online course is an advanced level course that provides insights on drug delivery and the principles and ideas based on it. The course is offered through the Swayam initiative by the Government of India. This online free training is conducted for twelve weeks and is a certification course for any individual interested in learning about the applications of drug delivery.

This elective course is developed and provided by the National Program of Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC) and is part of the biological sciences and bioengineering domain. The course educator for the Drug Delivery: Principles and Engineering online program is Professor Rachit Agarwal from the centre of biosystems science and engineering who will guide the students with the knowledge and experiential learning of the concepts during the training. The students of this course can apply for the certificate which is provided with the NPTEL and IISC logo on it.

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ online course is offered by the Swayam platform, an initiative by the ministry of education in India. This design-based program is developed and structured by the ‘National program of Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC).

This is an elective course provided for the students and faculty in the engineering domain who will develop their skills and expertise in circuit designs. 

The course educator for this online training program on Op-Amps is Dr. Hardik J. Pandya who is an assistant professor from the department of electronics systems engineering which is under the division of electric sciences in IISC, Bangalore. The program is part of the electrical, electronics, and communications engineering that will fetch the students with three credit points. 

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ is a certification program that is scheduled for twelve weeks for the candidates of the course.

The ‘Bonds and Bands in Solids’ online course is offered as part of the Swayam initiative by the ministry of education in India. This online program is developed and provided by the ‘National Program on Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC) hence the Swayam course certificate consists of the logos of NPTEL and IISC.

The online training of this core course is scheduled for twelve weeks where students are guided through the advanced level training in the domain of physics, chemistry and metallurgy, material sciences, and mining engineering.

The students will learn about the concepts and aspects of the electronic and vibrational states in solids in this online course instructed by Professor Ramasesha from IISC. The ‘Bonds and Bands in Solids’ certification course is a faculty development program accredited by the All India Council for Technical Education(AICTE) and the students of this course receive three credit points after completion.

The ‘Introductory Neuroscience & Neuro-Instrumentation’ online course is a design-based program offered in the Swayam portal which is an initiative by the ministry of education in India. This faculty development program approved by the AICTE is developed and provided by the National Program for Technology Enhanced Learning in collaboration with the Indian Institute of Science(IISC) in Bangalore. The course study is focused on the design aspects and implementations of neuroscience in our day-to-day lives.

The program is conducted for a period of twelve weeks by the course instructor from the center for Bio-systems science and engineering in IISC, Dr. Mahesh Jayachandra is the facility technology manager in neurophysiology. This is an elective course and developed as a part of the electrical, electronics, and communication engineering domain.

The students of the ‘Introductory Neuroscience & Neuro-Instrumentation’ training program will gain three credit points and receive a course certificate that contains the NPTEL and IISC logo making it E-Verifiable.

The Semiconductor Devices and Circuits online course is a faculty development program approved by the  ‘All India Council for Technical Education. It is made available by the ministry of education (Indian Government) through the Swayam platform. This online program is part of the Electrical, Electronics, and Communications Engineering and VLSI design section and is scheduled for a period of twelve weeks. 

This core course is developed by the National Program of Technology Enhanced Learning (NPTEL) and the Indian Institute of Science (IISC) and the certificates are authenticated by NPTEL and IISC. The course instructor is Sanjiv Sambandan, an assistant professor in the department of instrumentation and applied physics who will provide valuable insights on semiconductor devices and about the relation between the performance of circuits to the material and device behavior.

The Semiconductor Devices and Circuits program is for the students in their bachelor’s or master’s program to improve their skills and expertise in semiconductor technology.

The Design of photovoltaic systems online course is a faculty development program advocated by the AICTE and is developed by the National Programme of Technology Enhanced Learning and the Indian Institute of Science in Bangalore. This design-based program is an elective course and a part of electrical, electronics, and communication engineering.  

In this course, the learners gain an understanding of the functioning of the photovoltaic cell and its design system and structure. The program is organized for a period of twelve weeks and the course educator for this course is a faculty from IISC, Prof. L. Umanand from the department of electronics systems engineering. The course curriculum provides three credit points and levels of the undergraduate or postgraduate standard for the students. 

The Design of photovoltaic systems training provides an opportunity for the students to discuss the principles of electrical features and coordination in the PV cells and circuits through an experiential learning process.

The ‘Fabrication Techniques for MEMs-based sensors: clinical perspective’ online course is provided on the online education portal, Swayam by the ministry of education in India. This course is a faculty development program accredited by the AICTE and is developed and offered by the National Program for Technology Enhanced Learning(NPTEL) in partnership with the Indian Institute of Science(IISC), Bangalore.

The fabrication techniques program is an elective course that is scheduled for a period of twelve weeks and is part of the electrical, electronics, and communications engineering domain. The students of this course will get an opportunity to explore the aspects of fabrication and microengineering. The course instructor for this undergraduate-level training program is Prof. Hardik Jeetendra Pandya from the department of electronics systems engineering in the division of electrical sciences. 

In this course, the students will gain an experiential understanding of the techniques and principles while also receiving the three credit points and the Swayam course certificate that consists of the logos of NPTEL and IISC.

The ‘Fundamentals of micro and nanofabrication’ online course is provided on the online free education provider portal of Swayam, an initiative of the ministry of education in India. This online program is part of the biological sciences and bioengineering division and is developed and offered by the National Programme for Technology Enhanced Learning(NPTEL) in collaboration with the Indian Institute of Science(IISC) in Bangalore.

This faculty development program is approved by the AICTE and is conducted for a period of twelve weeks for the interested students from various domains. This core course is guided by the course instructors and faculties from IISC which includes, Prof.Shankar Kumar Selvaraja who is the deputy chairman of the National Nanofabrication Center at IISc, and Prof.Sushobhan who is an assistant professor at the center for Nano Science and Engineering (CeNSE).

The participants of the ‘Fundamentals of micro and nanofabrication’ training program will be awarded three credit points and a course certificate with the logos of NPTEL and IISC which makes the certificate e-Verifiable.

The ‘Joining Technologies for metals’ online course is about the process of joining metals which is a significant part of several manufacturing industries. This training course on metal joining technologies is a National Program for Technology Enhanced Learning Program(NPTEL) online certification course designed and conducted by the Indian Institute of Technology(IIT) Roorkee. The NPTEL course is provided for the students pursuing production engineering or mechanical engineering courses on the Swayam education platform.

This online certification course curriculum consists of eight modules divided into forty presentations which will take eight weeks for the students to complete the course. This faculty development program on joining metals is instructed by Prof. D K Dwivedi from the department of mechanical and industrial engineering. This AICTE approved program is a core course for engineering students that will enable them to gain two credit points after course completion.

The ‘Joining Technologies for metals’ training program is categorized under the domain of mechanical engineering and materials joining division. 

The course on ‘Hydrostatics and Stability’ is provided on the Swayam online educational platform initiated by the ministry of education in India. This National Program for Technology Enhanced Learning online course on the significant aspects of naval architecture is developed and offered by the Indian Institute of Technology Kharagpur.

The faculty development program for the undergraduate level students of ocean engineering is scheduled for a period of twelve weeks and this core course will enable the students to gain three credit points after course completion.

The online training for the ‘Hydrostatics and Stability’ course is guided by the course educator, Prof Hari Warrior from the department of ocean engineering and naval architecture at IIT Kharagpur. This undergraduate and postgraduate level course enables students to understand the principles and techniques of hydrostatics and stability. The eligible students are awarded the course certificate which consists of the logos of NPTEL and IIT Kharagpur.

The Introduction to interfacial waves online course is a study about the wider aspect of vibrations and oscillations along with the specific focus on the challenges in hydrodynamic stability. This National Program for Technology Enhanced Learning(NPTEL) online course is developed and offered by the Indian Institute of Technology(IIT) Bombay for students pursuing chemical engineering and mechanical engineering as an elective course.

The course instruction is conducted for twelve weeks and the course educator for this faculty development program is Dr. Ratul Dasgupta, an associate professor from the department of chemical engineering at IIT Bombay.

The students of this online training program are provided with three credit points and a course certificate. The course certificate consists of the logos of NPTEL and IIT Bombay adding more value to it. The online course on introduction to interfacial waves is provided on the Swayam education platform and is a postgraduate level program.

The Integrated Photonic Devices and Circuits training program is offered by the Indian Institute of Technology Madras and is a National Program for Technology Enhanced Learning online free course. The online course is a faculty development program approved by the All India Council for Technical Education and is provided on the online free education portal, Swayam which is an initiative of the ministry of education in India.

This elective course is conducted for twelve weeks by students of engineering by Prof Bijoy Krishna Das faculty of the department of electrical engineering in IIT Madras. The course provides three credit points to the students after completing the course successfully. The undergraduate and postgraduate level program enables students to gain a theoretical and practical learning experience of the ideas and aspects of integrated photonics devices and circuits. The students are issued with the course completion certificate with the logos of NPTEL and IIT Madras which explains the acknowledgment.

The ‘Stochastic Modeling and the Theory of Queues’ training is a National Program for Technology Enhanced Learning online course offered by the Indian Institute of Technology Madras on the Swayam online education portal. This online program is provided for free as an elective course for the students of postgraduate level and research scholars.

The online course on stochastic modeling and queuing theory is scheduled for a period of twelve weeks and the course study is led by Prof Krishna Jagannathan, an assistant professor in the department of electrical engineering at IIT Madras.

The students of this course will get an opportunity to discuss detailed concepts and principles associated with the domain of electrical, electronics, and communication engineering and communication and signal processing. The learners will gain three credit points after completing this ‘Stochastic Modeling and the Theory of Queue program and a course completion certificate which consists of the logos of NPTEL and IIT Madras. 

The ‘Upstream LNG Technology’ training program is a National Program for Technology Enhanced Learning online free course developed by the Indian Institute of Technology Kharagpur. The informative course is provided on the Swayam online education platform for the students of undergraduate and postgraduate levels.

The online training is scheduled for twelve weeks and the course study is guided by Prof Pavitra Sandilya from the cryogenic engineering center in IIT Kharagpur assisted by two other research scholars. This faculty development program is approved by the All India Council for Technical Education and is part of the chemical engineering and physics category. The participants of this online program will gain three credit points and a course completion certificate after completing the course and clearing the exam with the required mandates. The course certificate of the ‘Upstream LNG Technology’ online course consists of the NPTEL and IIT Kharagpur’s logos which makes the certificates more significant and authorized.

The Technical Textiles is provided on the Swayam online educational platform for the undergraduate and postgraduate students of textile engineering and technology, and material sciences. This National Program for Technology Enhanced Learning free online course is developed by the Indian Institute of Technology Delhi. The course is a study about the details of technicalities associated with the textile industry and to understand the characteristics and functional properties of textile materials and their implementation.

This faculty development program belonging to the field of textile engineering is a core course organized by the IIT Delhi for twelve weeks. The course educator to guide the students through the course is Prof Apurba Das, from the department of textile technology in IIT Delhi. The course is approved by the All India Council for Technical Education and helps the students acquire three-course credits and a course completion certificate that consists of the logos of NPTEL and IIT Delhi representing their recognition of the ‘Technical Textiles’ online training.

The ‘Enclosure design of electronics equipment’ online course is about the process and techniques of product designing of electronic equipment and devices. This program is a National Program for Technology Enhanced Learning(NPTEL) online certification course and is developed and offered on the Swayam online education portal by the Indian Institute of Science (IISC) Banglore. This faculty development program on electronics design is approved by the AICTE and aids in the skill development of the candidates in the field of electrical engineering, and electronics and communication engineering. 

The learners of this course will gain three credit points after completing the course study guided by the IISC faculty, Prof .V.Chalapathi Rao from the department of electronics systems engineering in IISC. The course on ‘Enclosure design of electronics equipment’ by Swayam aids in the discussion of issues in the mechanical aspects of electronic equipment design and prototyping. This online elective NPTEL course is conducted for twelve weeks for undergraduate and postgraduate level students.

The ‘Power system analysis’ course is offered by the Indian Institute of Technology Kharagpur through the Swayam online education portal. It is a National Program for Technology Enhanced Learning(NPTEL) online free course for the students pursuing their bachelor’s or master’s degree in electrical engineering.

The course helps the students gain comprehensive knowledge of per-unit systems and circuit system applications. This faculty development program by IIT Kharagpur is conducted for twelve weeks and is approved by the All India Council for Technical Education. The undergraduate-level course is guided by Dr. Debapriya Das from the department of electrical engineering at IIT Kharagpur. The course which is a part of the Electrical, Electronics and Communications Engineering, and  Power Systems and Power Electronics domains enables students to earn three-course credits. The course certificate received after completion of the ‘Power system analysis’ online training consists of NPTEL and IIT Kharagpur logos that represent its authenticity. 

The ‘Glass in buildings: Design and applications’ online course is provided by the National Program for Technology Enhanced Learning in collaboration with the Glass academy. This online course on the role of glass in building is offered on the Swayam online education platform by the faculty from the Indian Institute of Technology Madras and the Indian Institute of Technology Roorkee. 

The course study is based on the sustainability aspects of glass and its applications. This online program is an elective course for students of the civil engineering and architectural domain. The online training is held for twelve weeks by industrial professionals and domain experts of diverse potential. This AICTE approved course enables the students to earn three-course credits and a Glass in buildings: Design and applications certificate after completing the program.

Apart from the expert guidance, the course educators for the ‘Glass in buildings: Design and applications’ online certificate courses are Prof. K N Satyanarayana and Dr. E. Rajasekar from the Indian Institute of Technology.