Online Engineering And Architecture Courses & Certifications

Societies are plagued by challenges of unemployment, poverty, poor housing, and productivity constraints. Not only are developing countries but most cities around the world are pulled back owing to these pressures. In Edx’s Sustainable Cities course, candidates get to study these major issues and enable extraordinary changes in the future. 

Based on Sustainable Development Goal 11 of “making cities and human settlements inclusive, safe, resilient, and sustainable” by 2030, the Sustainable Cities programme by Edx is developed through a partnership between the Indian Institute for Human Settlements (IIHS) and the SDG Academy. 

Concepts touched on in the curriculum include urban sustainability through increased productivity, reduced inequality, and essential infrastructure provision. Sustainable Cities course, spread across nine weeks of learning, help students harness the power of urban development and determine opportunities in various fields, from cultural to economic infrastructures. 

Moreover, the Sustainable Cities online course is an intermediate course, instructed in English. However, learners can also opt for transcripts in English or Hindi based on preference. On paying a fee, verified certificates are available to students. There are two options for pursuing the programme, namely, paid certificate and free audit modes. In the free audit mode, the students will be provided only limited access to the course. 

The Roadway Design with OpenRoads online course is developed to enable students to explore the various methods of designing and constructing roadways using state-of-the-art software like Bentley’s OpenRoads designer. This civil engineering program is provided by Skill Lync for civil engineers and students. The 9 week program enhances the designing skills and technical skills of the students through an industrially relevant curriculum that provides knowledge to find opportunities in different companies in the industry. 

The roadway design certification course allows students to work on three projects during the course study to enhance and apply their practical knowledge. The candidates of this course are given a demo session to the course along with other significant learning experiences. The software tool applied during the training is Bentley OpenRoads Designer and Connect Edition that provides the designing abilities for a survey, drainage, subsurface utilities, and roadway design. The Roadway Design with OpenRoads online training ensures a course completion certificate and professional portfolio at the end of the program.

The MATLAB for Mechanical Engineers online training will help you become a certified MATLAB professional in the field of mechanical engineering. You will learn powerful simulation skills using the versatile libraries of the MATLAB programming language. This course will help you understand MATLAB use cases in mechanical engineering, various terminologies, and the mathematical models it supports.

MATLAB for Mechanical Engineers training course is an all-round training course specially crafted to teach core project mechanical engineering concepts and MATLAB programming skills. Candidates will gain expertise in the MATLAB programming language and modern tools and techniques necessary to design simulations for industry-related problems.

Furthermore, the Skill-Lync’s MATLAB for Mechanical Engineers course sports high-quality pre-recorded video lectures, mentored and curated by industry experts hailing from fortune 500 companies. Candidates receive dedicated support in the form of community forums and a support engineer. Besides, you will get a course-completion certificate upon the satisfactory conclusion of the programme. If you’re in the top 5% of your batch, you are also eligible to receive the merit certificate.

Diploma in Automation & Control is a government certificate online training program administered by INSTITUTE FOR DESIGN OF ELECTRICAL MEASURING INSTRUMENTS (IDEMI) Extension Center, Bangalore. The Diploma in Automation & Control certification syllabus will walk the learners through all the concepts related to automation and control. 

Offered by IDEMI, Diploma in Automation & Control online course is designed in a hybrid model in which the mode of teaching will be both offline and online. The course duration is two months. After the completion of the Diploma in Automation & Control Certification by IDEMI, the learners will be awarded a certificate that will help them to find a good professional opportunity in the sector.

The Design of RCC and PSC Superstructures using the LUSAS online course is developed for the students to explore the design and analytical techniques involved in building reinforced concrete cement and prestressed cement structures. The online program is provided by Skill Lync for the students and engineers who are interested in learning about precast structures. This civil engineering course is conducted for two months.

The course study involves the students gaining knowledge of the finite element analysis software tool LUSAS and enables them to explore the design techniques along with MS Excel software. The students are given a demo session and an opportunity to work with two industrially relevant projects to acquire hands-on experience of design concepts and technical skills. 

The Design of RCC and PSC Superstructures using the LUSAS training program helps the students gain technical skills and a course completion certificate to be recognized by employers for skill acquisition and career development.

Offered by Hamad Bin Khalifa University (HBKU), Using Photovoltaic (PV) Technology in Desert Climates is an 8-week online certification course. The course discusses the effect of temperature and dust on solar cells and PV modules. Students will get to know about the cleaning methods utilised to reduce soiling and how to measure solar cell and PV module performance. With Using Photovoltaic (PV) Technology in Desert Climates certification by HBKU via edX, students will also be able to optimise the design of the technology to enhance the energy yield.

Using Photovoltaic (PV) Technology in Desert Climates certification syllabus consists of eight modules that will be taught by expert faculty from Hamad Bin Khalifa University. The course can be accessed in the free Audit Track and Verified Track. In the Free Audit Track, learners will have limited access to course materials and edX support. Verified Track, on the other hand, will give them unlimited access to course materials and edX support, along with access to graded assignments and exams and a shareable certificate. Students can enrol in the free audit track with limited access or they can upgrade to the paid verified track directly.

The Health, Safety, and Wellness in Mining certification course is provided by EdX for learners who are keen to study various concepts related to health, safety, and wellness in the mining industry. Mining in itself is a huge and complicated process that must be done with precautions and safety measures. The online self-paced course by EdX is an initiative for making the workforce aware of the safety measures in this industry. This is one of a total of six Modern Mining Professional Certificate courses offered by EdX. 

Health, Safety, and Wellness in Mining training draws on the expertise of academics and content from the University of Queensland and Curtin University. This course comprises video lectures, training by experts, simulations, and class discussions. Besides, the candidate will also receive the  Health, Safety, and Wellness in Mining certification by EdX after the completion of the course if one has opted for a verified track learning mode. In the free mode, the learners can audit the self-paced course for a limited period. 

This is an online course on Advanced Textile Printing Technology by Swayam for candidates who have prior knowledge of dyeing and printing. The course offers various topics for a better understanding of textile printing technology to the participants. The course will cover the mechanism of sublimation transfer with the free path length and along with this, the course covers the topics like fundamentals conventional printing with complexities and limitations.

The Advanced Textile Printing Technology Certification course will provide the candidate with an E-certificate by the end of the course which will be having the logo of NPTEL and IIT Madras. The instructor in this course will be a well-experienced faculty member of IIT Delhi Professor Kushal Sen from the department of textile technology to guide the students during the course duration of the 8 weeks. 

Advanced Textile Printing Technology Training course will offer the candidate a self-paced online learning program and the course is free of cost as the swayam is the Indian government initiated online learning program for the better understanding of the candidate with no fee charges.

The Testing of Functional and Technical Textiles certification course is a significant phase during the selection of textile materials, and it helps students assess their performance characteristics. It explains to students how testing is crucial while ensuring that the customer specifications are met. 

The Testing of Functional and Technical Textiles online program is spread over eight weeks and falls under the broad domain of textile engineering. Swayam offers this online course at both the postgraduate and undergraduate levels. Moreover, the curriculum covers all topics ranging from geotextile testing to ballistic protective textile testing and has also been approved by the AICTE. 

The Testing of Functional and Technical Textiles certification training is offered by Professor Apurba Das. He is presently working as a professor in the Department of Textile Technology at IIT Delhi. Thus, the students can be assured of being trained by the best in the field.

The Architectural Acoustics certification course consists of eight modules that are clubbed into three sub-sections. The first section focuses on an introduction to the course and sound physics; the second part teaches space acoustic design, while the third part covers the core aspects of environmental noise control-air and structure-borne.

Backed with models that can be used by Acoustical Consultancies and Architectural Designers for their induction programmes, the Architectural Acoustics course by Swayam is designed for a neutral audience. However, candidates are required to possess some knowledge of Architecture, Mathematics, and Physics to enrol in the course. 

Moreover, this eight-week core is an undergraduate-level course and falls under the category of Architecture and Planning. Prof. Sumana Gupta and Prof. Shankha Pratim Bhattacharya from IIT Kharagpur teach this online course. Besides, this course is free to learn from, with an option to appear for a proctored exam at designated centres for a nominal fee of Rs 1,000.

In everyday lives, you get to see different signals and systems being used at large ranging from making a phone call, editing a picture, editing audio files, listening to songs to something as complex as speech recognition software, and taking X-rays. 

All of this requires assembling, stockpiling, transferring, processing data from the actual world. Signals and Systems program deals with performing all of the above tasks by studying the fundamental structure of systems and signals.

System and signals program part 1, which is divided into two halves explores multiple properties related to systems and signals and learning of various systems and theorems with their characterization. These ideas will be useful in comprehending different electrical engineering programs. 

Signals and systems course will be very useful for students of other fields such as mechanical and aerospace as well and even for other branches of science and engineering. 

The program information will be available in English and Hindi but the assignments will be in English only.

Signals and systems form a part of our day-to-day experiences let it be as basic as listening to music, receiving and making calls, using voice recognition software like Google Now and Siri, photo editing to taking ECGs. Each of these includes gathering, transmitting, storing, and preparing data from the physical world.

This course will prepare you to handle these assignments effectively by learning the fundamental numerical system of signals and systems. The contents of this course are divided into two parts namely part one – EE210.1x and part two - EE210.2x. And this being part two will include various transforms and theorems where the contents of part one will be these courses prerequisites. The candidates will deal with Z- transform, Laplace transform, sampling theorem, and discrete Fourier transform, the concepts introduced in this course will be used in understanding various other courses such as communication systems, digital signal processing, digital message transmission, electrical engineering courses, and understanding control systems.

Signals and Systems, Part-2 will provide the candidates with a clear understanding of the contents that fall under signals and systems.

The Wheeled Mobile Robots programme is a collaborative online course by IIT Madras and IIT Palakkad. Students will learn algorithms and measurements to design basic electrical and mechanical robots. The curriculum adopts an elective approach to product design, mechanical engineering, technology, and manufacturing processes subjects. Those interested in mobile robotics and are at their graduate/undergraduate level will gain the most from this course.

Aiming at undergraduate/postgraduate students, the Wheeled Mobile Robots certification syllabus is spread across eight weeks. It explains sensors, robot types, mapping, motion controlling, navigation, and error propagation. Students will also learn the Newton-Euler and Lagrange-Euler methods of mobile dynamics. Assignments and study references come along as course materials.

Learners can opt for the Wheeled Mobile Robots certification to verify their newly acquired knowledge. They must register via the course website for the proctored examination conducted by Swayam at select examination centres. Additionally, they must complete the study and submit all the in-course assignments.

The Robot  Motion Planning  Certification course is an 8-week online course. The IIT Kanpur is responsible for creating and approving the course syllabus, although Swayam is used to deliver the course. Once more, the Indian Institute of Technology, Kanpur, and NPTEL are the organizations that award this course certificate.

The training in robot motion planning is a part of the robotic engineering elective curriculum. Ashish Dutta is the professor of this certificate programme. The fundamental ideas and mathematics covered in this course will be necessary for understanding, analyzing, and designing the algorithms needed for the motion planning of serial robotic arms.

Shells are an essential element of structural engineering, just like beams and plates. Theory of Composite Shells program is a postgraduate level course that will take you on a journey from the basic concepts of doubly curved shells to the development of shell equations. It will also provide an introduction to three-dimensional solutions of a cylindrical shell.

IIT Guwahati has designed the curriculum of Theory of Composite Shells certification in association with NPTEL. The course will be taught by professor Poonam Kumari and will be available online on Swayam, an online learning platform that is a Ministry of Education, Government of India initiative. 

Theory of Composite Shells is an eight-week course that offers certification as well. There are periodic assignments and an exam held at the end of the term to help motivate you and understand your progress. There is no enrolment fee for this AICTE approved FDP course.

The Introduction to Launch Vehicle Analysis and Design certification course is an AICTE approved course which is available on the website at zero cost. The course deals with the topics of aerospace engineering which includes launch vehicles that are used in space for transporting objects. Participants will get deep knowledge and information on the topic as each topic is discussed separately with examples and activities throughout the Introduction to Launch Vehicle Analysis and Design certification syllabus. The course is available throughout the year in the online mode for the students. The course takes 8 weeks to get completed, however,  candidates will get access to the program after the mentioned time. 

Candidates get to be certified participants in the Introduction to Launch Vehicle Analysis and Design training. The certificate can be achieved through the registration fees for the exam and a qualified proctored exam. Students can learn from the program according to their conditions. Students do not have to meet any deadlines or requirements for this course and can study from the program without any limitations. The Introduction to Launch Vehicle Analysis and Design online course not only includes lectures but also provides discussion groups, tests, quizzes, etc. for a better understanding of the subject to the students. This is self-paced training and students are allowed to learn from the provided notes whenever they require.

The Feature Engineering certification course is of an intermediary level of training which is a hundred percent online course and it can be viewed on the website of Coursera. The programme is within the easy reach of the enrolled students at zero cost. The training is a part of the course named Machine Learning with TensorFlow on Google Cloud Platform Specialization that is available on Coursera. Aspiring participants who join the online course of Feature Engineering will be able to comprehend several features used for distinct functions in order to make an accurate model of machine learning.

In the Feature Engineering online course, students are not limited to follow a particular set of reading materials and they can learn from the external study matter along with the one provided by the platform within the programme. The programme does not limit students with any fixed schedules or deadlines and participants are allowed to set their own study schedules according to their preferences and requirements.

This intermediate level of the programme can be concluded by spending a total of approximately 8 hours. If the participant successfully completes the curriculum, he or she will be able to receive a certificate for the online course from the platform.

CRISPR is among the most disruptive inventions in recent times, alongside IoT payments and blockchain. This gene-editing technology has already had an influence on industries including agriculture, biofuel, and healthcare, and its worldwide commercial potential is expanding at a rapid pace. The CRISPR: Gene-editing Applications online course gives a thorough grasp of the CRISPR Cas9 gene-editing technique, its numerous applications, and the business prospects presented by genetic engineering.

With a specific industrial emphasis and legitimate case studies, the CRISPR: Gene-editing Applications training investigates the use of CRISPR in biotechnology and explores how it can aid in enhancing food yields, creation of disease-resistant cultivars, and allow bioenergy to become a sustainable alternative to fossil fuels.

Study the prospects for healing inherited genetic problems, curing viral infections, and improving cancer research. The CRISPR: Gene-editing Applications syllabus provides candidates with a comprehensive knowledge of the CRISPR environment and its future possibilities, as well as industry perception into the ethical concerns of gene editing.

The ‘Remote Sensing and GIS’ online course is supported by the National Program for Technology Enhanced Learning(NPTEL) and is provided on the Swayam online education platform. This course on remote sensing and Geographic Information systems (GIS) is developed and offered by the Indian Institute of Technology(IIT) Guwahati for undergraduate, postgraduate students, and Ph.D. scholars.

The course study is based on the modern concepts and remote sensing principles and GIS that help the students understand their applications. The online training is conducted for eight weeks by the course instructor, Prof. Rishikesh Bharti, a faculty member of the department of civil engineering at IIT Guwahati. 

This faculty development program by Swayam is a part of the civil engineering domain and is approved by the All India Council for Technical Education. The students of this core course of undergraduate or postgraduate level will receive two credit points and a course completion certificate after completing the program.

The program on ‘Sustainability through Green Manufacturing Systems: An Applied Approach’ is a National Program for Technology Enhanced Learning free course developed and organized by the Indian Institute of Technology Kanpur. The online course is provided by the Swayam online education portal initiated by the ministry of education in India.

The online program is scheduled for eight weeks and the course instructors are faculty from IIT Kanpur namely, Prof. Deepu Philip working in the industrial & management engineering department and Prof. Amandeep Singh from the mechanical engineering department. The course study helps the students discuss the innovative ways that lead to green manufacturing systems that provide sustainability. By the end of this undergraduate-level course, the students will gain two credit points and a course completion certificate for which the proctored final exam is mandatory. This ‘Sustainability through Green Manufacturing Systems: An Applied Approach’ training program, a part of the management studies and manufacturing processes and technology is an elective course.

The Manufacturing Process Control I certification by the Massachusetts Institute of Technology (MIT) is an 8-week online course. This online certification course is designed to provide fundamental concepts of manufacturing processes. Offered via edX, the Manufacturing Process Control I online course will help learners build powerful statistical process control methods that are the foundation of world-class manufacturing quality. The Manufacturing Process Control I certification syllabus will expose learners to statistical methods applied to any unit manufacturing process.

By enrolling in the Manufacturing Process Control I certification course, participants will be able to identify inherent variability in continuous production. They will also be able to apply basic concepts of probability and statistics to characterize process variation and differentiate between design specifications and process capability.

The Manufacturing Process Control I training programme is a part of the Principles of Manufacturing MicroMasters program which is designed and delivered by MIT’s top-ranked Mechanical Engineering department in the world. Learners who pass the eight courses in the program will get the MicroMasters Credential and qualify to apply to gain credit for MIT’s Master of Engineering in Advanced Manufacturing & Design program.

The Manufacturing Systems I certification by Massachusetts Institute of Technology, Cambridge via Edx is an 8-week online course. This online certification course is designed to provide learners with an understanding of seemingly indistinct production lines with a particular emphasis on disruptive events like their effects and how to cope with them, along with inventory dynamics and management. A part of the Principles of Manufacturing MicroMasters program, the Manufacturing Systems I online course from MIT via edX exposes learners to how to assess manufacturing systems to optimise performance and control cost.

The Manufacturing Systems I certification syllabus covers essential topics that provide learners with the basis to enter the manufacturing field and get placed in roles such as operations managers, supply chain managers and others. This online certification course can be pursued by anyone who studied calculus, probability and statistics at the undergraduate level. The Manufacturing Systems I certification course has Verified Track through which students will get access to complete course materials, video lectures, graded assignments, and assessments with a shareable certificate. Students can enrol in the free audit track with limited access or they can look to upgrade directly to the paid verified track.

The Manufacturing Process Control II certification by the Massachusetts Institute of Technology, Cambridge is an 8-week online course. This online certification course is offered by edX and is part of the Manufacturing MicroMasters program. The Manufacturing Process Control II online course emphasises the foundations of statistical process control to add process modelling and optimisation. In this online certification course from MIT via edX, learners will understand how to design experiments for process improvement and methods to optimise processes and accomplish robustness to noise inputs.

The Manufacturing Process Control II certification syllabus is designed in a way that helps students develop skills in engineering and management essential for competence and competitiveness in the modern manufacturing industry. The curriculum will conclude with a capstone activity that integrates all the Statistical Process Control topics. Participants can attend the Manufacturing Process Control II classes through video lectures by subject matter experts from MIT and graded assignments. Participants will be able to either enrol in the free audit track that has limited access or if they want lifetime access can look to upgrade to the paid verified track so that they do not find any interruption.

Designed exclusively for mechanical and production engineering students, the Materials Science and Engineering online course by Swayam focuses mainly on structural materials. The course covers both the theoretical as well as practical aspects of materials engineering. The syllabus has been divided into three categories, Crystallography, Mechanical properties, and Phase diagrams and heat treatments, each of which will be studied in detail. 

IIT Roorkee curates the Materials Science and Engineering certification program. The course will be taught by a top instructor from the institute, Professor Vivek Pancholi. This course is an elective type, undergraduate-level program. The course falls under the category of Mining engineering, Material sciences, and Metallurgy. 

The Materials Science and Engineering training will take around eight weeks to complete. Candidates will be taught online via video tutorials and graded assignments for self-assessment. There will also be an optional certification exam at the end of the term for candidates who want to receive the e-certificate.

The Solar Photovoltaics: Principles, Technologies and Materials online programme is curated by IIT Kanpur. It is an elective course which runs for a duration of eight weeks. It is designed for both UG and PG level students and falls under the category of Electronic materials, Metallurgy and Material sciences and Mining engineering. This programme is an FDP course approved by AICTE. 

The aim of the Solar Photovoltaics training by Swayam is to introduce the candidates to the different photovoltaic materials and their role and functioning in solar cells' operation. Other important topics such as semiconducting materials, semiconductor junctions and their basic properties will also be discussed. This programme will also focus on first, second and third-generation solar cells and photovoltaic devices' essential characteristics.

The Solar Photovoltaics certification programme is taught online and rife with study materials and video tutorials. Candidates will be able to access all course material free of cost and at their own pace. They can also apply for certification and appear for the proctored exam at the end of the term.

The Fluid Machines certification programme will cover the basic principles governing energy transfer in a Fluid Machines and take up the different kinds of air and hydraulic machine systems, along with their performances. You will learn about the physical concepts, mathematical operations, along with exercise problems and examples of practical importance.

Moreover, the Fluid Machines course curriculum includes topics such as Hydraulic Impulse Turbine, Air Compressor, Hydraulic Pump, and more comprehensively. By the course end, you will have a firm grip over the fundamental concepts of Fluid Machines. Not to mention, you will become adept at applying the laws and principles to requirement-specific applications. 

Prof. Suman Chakraborty, who is currently an institute chair professor at the Indian Institute of Technology, Kharagpur, will be the course coordinator for the Fluid Machines programme by Swayam. An expert in the field, she is the recipient of the Shanti Swaroop Bhatnagar Prize, the highest scientific prize from the government of India. 

Besides, after the conclusion of the Fluid Machines course, students will be eligible for positions in companies like G.A.I.L., O.N.G.C., Shell, I.O.C.L., G.E., and more.

During the past 20 years, the world has seen a rapid increase in the demand for Refrigeration as well as Air Conditioning Mechanics. There was also a rise in the employment opportunities available to these mechanics, with a total of around 11,000 new vacancies being added, or created, between the years 2019 and 2020. 

While refrigeration is the process of removing heat from an enclosed space for reducing as well as maintaining the temperature of the contents of that space, on the other hand,  air conditioning helps in regulating the amount of air in any large building. The aforementioned Certified Basic Refrigerator and Air Conditioning course is offering the students a comprehensive study of the refrigeration cycles as well as a proper insight into the psychrometric processes used in air conditioning. 

It also provides the students with skills that are required for seeking employment in various companies. 

Additionally, the course will help you understand the correct process for verifying technical and mechanical gaults for HVAC systems, while also providing you with technical assistance and job training. 

The Steam Power Engineering Course’s syllabus design is made with the complete dedication and hard work of a skilled tutor. The first half of the course deals with the study of the simple steam power cycle, regeneration, reheat, and superheating. Then in the latter part of the course, actual cycle and component efficiency will also be taught. 

As the course mainly deals with Steam Power Plants, each part of the plant is discussed in detail too. The key parts which are first discussed are the kinds of steam generators, and their parts, steam turbines, their efficiency, types, and arrangements. The main motive of this course is to provide knowledge to individuals about electricity generation when steam is used as a medium. 

Swayam Steam Power Engineering Course is suitable for people in need of good teaching guidance regarding the topic of the steam power plant and its importance in today’s time. The course is ongoing and will continue for 8 weeks. This course can be selected by candidates desiring to develop a career in thermal power plants, steam power plants, or as a power engineer.