Page 105 - Best Online Certification Courses - Eligibility, Fees, Duration, Career Options

Offered by

IIT Kharagpur via Swayam

Certificate

Computational Fluid Dynamics

The Computational Fluid Dynamics online course is a 12 weeks program offered by Swayam, an initiative by the Ministry of Education, Government of India. CFD, or computational fluid dynamics, is a subfield of continuum mechanics concerned with the simulation analysis of heat transfer and fluid flow issues. The Computational Fluid Dynamics training covers analytical solutions to various differential, integral or integro differential models found through mathematical modelling of any continuous issue confined to basic geometries.

Analytical solutions cannot be derived for the majority of cases of practical importance, and a numerical method must be used. Computational Fluid Dynamics syllabus covers the technique of getting approximate numerical solutions using digital computers in the subject of mechanics. Computational Fluid Dynamics refers to the same approach for thermo-fluidic issues. CFD is concerned with providing an approximate analytical solution to the continuity equation focused on the basic conservation laws of momentum, mass and energy.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Madras (IITM) via Swayam +1

Certificate

Computational Fluid Dynamics using Finite Volume Method

The Computational Fluid Dynamics using Finite Volume Method online course is a 12-week FDP program offered by Swayam, an initiative by the government of India. The Computational Fluid Dynamics using Finite Volume Method training includes convection-diffusion, solution and discretization of diffusion and incompressible fluid equations. Each of the equations is discretized using the finite volume approach. The discretization and solution algorithms are written for both unstructured and structured models. The Computational Fluid Dynamics using Finite Volume Method syllabus covers hand computations on basic models as well as numerical coding of the algorithms.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IISc Bangalore via Swayam

Certificate

Drug Delivery: Principles and Engineering

The ‘Drug Delivery: Principles and Engineering’ online course is an advanced level course that provides insights on drug delivery and the principles and ideas based on it. The course is offered through the Swayam initiative by the Government of India. This online free training is conducted for twelve weeks and is a certification course for any individual interested in learning about the applications of drug delivery.

This elective course is developed and provided by the National Program of Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC) and is part of the biological sciences and bioengineering domain. The course educator for the Drug Delivery: Principles and Engineering online program is Professor Rachit Agarwal from the centre of biosystems science and engineering who will guide the students with the knowledge and experiential learning of the concepts during the training. The students of this course can apply for the certificate which is provided with the NPTEL and IISC logo on it.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Pharmaceuticals Knowledge of Biology Knowledge of Microbiology Knowledge of medical technology Knowledge of biomedical sciences Knowledge of Chemistry

Offered by

IISc Bangalore via Swayam

Certificate

Op-Amp Practical Applications: Design Simulation and Implementation

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ online course is offered by the Swayam platform, an initiative by the ministry of education in India. This design-based program is developed and structured by the ‘National program of Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC).

This is an elective course provided for the students and faculty in the engineering domain who will develop their skills and expertise in circuit designs.

The course educator for this online training program on Op-Amps is Dr. Hardik J. Pandya who is an assistant professor from the department of electronics systems engineering which is under the division of electric sciences in IISC, Bangalore. The program is part of the electrical, electronics, and communications engineering that will fetch the students with three credit points.

The ‘Op-Amp Practical Applications: Design Simulation and Implementation’ is a certification program that is scheduled for twelve weeks for the candidates of the course.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of electronics Knowledge of physics Knowledge of engineering

Offered by

IISc Bangalore via Swayam

Certificate

Bonds and Bands in Solids

The ‘Bonds and Bands in Solids’ online course is offered as part of the Swayam initiative by the ministry of education in India. This online program is developed and provided by the ‘National Program on Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore(IISC) hence the Swayam course certificate consists of the logos of NPTEL and IISC.

The online training of this core course is scheduled for twelve weeks where students are guided through the advanced level training in the domain of physics, chemistry and metallurgy, material sciences, and mining engineering.

The students will learn about the concepts and aspects of the electronic and vibrational states in solids in this online course instructed by Professor Ramasesha from IISC. The ‘Bonds and Bands in Solids’ certification course is a faculty development program accredited by the All India Council for Technical Education(AICTE) and the students of this course receive three credit points after completion.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics Knowledge of Chemistry Knowledge of Metallurgy Knowledge of engineering

Offered by

IISc Bangalore via Swayam

Certificate

One and two dimensional NMR Spectroscopy for chemists

The ‘One and two dimensional NMR Spectroscopy for chemists’ online course is part of the faculty development program and approved by the All India Council for Technical Education. This online core course is offered for twelve weeks through the Swayam initiative by the ministry of education in India for the students interested in learning about NMR spectroscopy and the scope of research in the field of chemistry and pharmaceutical industry.

This postgraduate level program is developed by the collaboration of the National Programme for Technology Enhanced Learning and the Indian Institute of Science(IISC) in Bangalore. The course curriculum is focused on the practical applications and knowledge acquisition by the students about the aspects of Nuclear Magnetic Resonance(NMR) spectroscopy.

The students of the ‘One and two dimensional NMR Spectroscopy for chemists’ training will receive three credit points and a course certificate (e-Verifiable) after completion of the final examination with the mandatory requirements.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Chemistry Knowledge of Biology Knowledge of Pharmaceuticals

Offered by

IISc Bangalore via Swayam

Certificate

Introductory Neuroscience & Neuro-Instrumentation

The ‘Introductory Neuroscience & Neuro-Instrumentation’ online course is a design-based program offered in the Swayam portal which is an initiative by the ministry of education in India. This faculty development program approved by the AICTE is developed and provided by the National Program for Technology Enhanced Learning in collaboration with the Indian Institute of Science(IISC) in Bangalore. The course study is focused on the design aspects and implementations of neuroscience in our day-to-day lives.

The program is conducted for a period of twelve weeks by the course instructor from the center for Bio-systems science and engineering in IISC, Dr. Mahesh Jayachandra is the facility technology manager in neurophysiology. This is an elective course and developed as a part of the electrical, electronics, and communication engineering domain.

The students of the ‘Introductory Neuroscience & Neuro-Instrumentation’ training program will gain three credit points and receive a course certificate that contains the NPTEL and IISC logo making it E-Verifiable.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics Knowledge of science Knowledge of biomedical sciences Knowledge of engineering Knowledge of Biology

Offered by

IISc Bangalore via Swayam

Certificate

Semiconductor Devices and Circuits

The Semiconductor Devices and Circuits online course is a faculty development program approved by the ‘All India Council for Technical Education. It is made available by the ministry of education (Indian Government) through the Swayam platform. This online program is part of the Electrical, Electronics, and Communications Engineering and VLSI design section and is scheduled for a period of twelve weeks.

This core course is developed by the National Program of Technology Enhanced Learning (NPTEL) and the Indian Institute of Science (IISC) and the certificates are authenticated by NPTEL and IISC. The course instructor is Sanjiv Sambandan, an assistant professor in the department of instrumentation and applied physics who will provide valuable insights on semiconductor devices and about the relation between the performance of circuits to the material and device behavior.

The Semiconductor Devices and Circuits program is for the students in their bachelor’s or master’s program to improve their skills and expertise in semiconductor technology.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of electronics Knowledge of physics Knowledge of engineering

Offered by

IISc Bangalore via Swayam

Certificate

Linear Algebra

The Linear Algebra online program is a Swayam course provided by the Ministry of Education(Government of India) and is designed by the National Programme on Technology Enhanced Learning(NPTEL) and the Indian Institute of Science in Bangalore. This course is part of the mathematics domain and will take twelve weeks for the students to complete the training.

The course instruction is done by Prof. Dilip. P. Patil, a faculty member of the department of mathematics in IISC. The course materials that include books, references, and assignments will be a source of extensive learning of the subject.

The Linear Algebra training provides expertise that enables students to equip themselves with valuable mathematical insights that improve their job skills. The students of this course will develop their knowledge of the geometric concepts involved in mathematical applications and other algebraic principles. This core course will fetch the candidates three credit points and a certificate from Swayam that is recognized by NPTEL and IISC Bangalore.

12 Weeks

₹ Free

Compare

Skills Covered:

Mathematical skill

Offered by

IISc Bangalore via Swayam

Certificate

Design of photovoltaic systems

The Design of photovoltaic systems online course is a faculty development program advocated by the AICTE and is developed by the National Programme of Technology Enhanced Learning and the Indian Institute of Science in Bangalore. This design-based program is an elective course and a part of electrical, electronics, and communication engineering.

In this course, the learners gain an understanding of the functioning of the photovoltaic cell and its design system and structure. The program is organized for a period of twelve weeks and the course educator for this course is a faculty from IISC, Prof. L. Umanand from the department of electronics systems engineering. The course curriculum provides three credit points and levels of the undergraduate or postgraduate standard for the students.

The Design of photovoltaic systems training provides an opportunity for the students to discuss the principles of electrical features and coordination in the PV cells and circuits through an experiential learning process.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of electronics Knowledge of engineering

Offered by

IISc Bangalore via Swayam

Certificate

Fabrication Techniques for MEMs-based sensors: clinical perspective

The ‘Fabrication Techniques for MEMs-based sensors: clinical perspective’ online course is provided on the online education portal, Swayam by the ministry of education in India. This course is a faculty development program accredited by the AICTE and is developed and offered by the National Program for Technology Enhanced Learning(NPTEL) in partnership with the Indian Institute of Science(IISC), Bangalore.

The fabrication techniques program is an elective course that is scheduled for a period of twelve weeks and is part of the electrical, electronics, and communications engineering domain. The students of this course will get an opportunity to explore the aspects of fabrication and microengineering. The course instructor for this undergraduate-level training program is Prof. Hardik Jeetendra Pandya from the department of electronics systems engineering in the division of electrical sciences.

In this course, the students will gain an experiential understanding of the techniques and principles while also receiving the three credit points and the Swayam course certificate that consists of the logos of NPTEL and IISC.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering Knowledge of science Knowledge of Biology Knowledge of physics

Offered by

IISc Bangalore via Swayam

Certificate

Fundamentals of micro and nanofabrication

The ‘Fundamentals of micro and nanofabrication’ online course is provided on the online free education provider portal of Swayam, an initiative of the ministry of education in India. This online program is part of the biological sciences and bioengineering division and is developed and offered by the National Programme for Technology Enhanced Learning(NPTEL) in collaboration with the Indian Institute of Science(IISC) in Bangalore.

This faculty development program is approved by the AICTE and is conducted for a period of twelve weeks for the interested students from various domains. This core course is guided by the course instructors and faculties from IISC which includes, Prof.Shankar Kumar Selvaraja who is the deputy chairman of the National Nanofabrication Center at IISc, and Prof.Sushobhan who is an assistant professor at the center for Nano Science and Engineering (CeNSE).

The participants of the ‘Fundamentals of micro and nanofabrication’ training program will be awarded three credit points and a course certificate with the logos of NPTEL and IISC which makes the certificate e-Verifiable.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Chemistry Knowledge of engineering Knowledge of Microbiology

Offered by

IIT Roorkee via Swayam +1

Certificate

Joining Technologies for metals

The ‘Joining Technologies for metals’ online course is about the process of joining metals which is a significant part of several manufacturing industries. This training course on metal joining technologies is a National Program for Technology Enhanced Learning Program(NPTEL) online certification course designed and conducted by the Indian Institute of Technology(IIT) Roorkee. The NPTEL course is provided for the students pursuing production engineering or mechanical engineering courses on the Swayam education platform.

This online certification course curriculum consists of eight modules divided into forty presentations which will take twelve weeks for the students to complete the course. This faculty development program on joining metals is instructed by Prof. D K Dwivedi from the department of mechanical and industrial engineering. This AICTE approved program is a core course for engineering students that will enable them to gain two credit points after course completion.

The ‘Joining Technologies for metals’ training program is categorized under the domain of mechanical engineering and materials joining division.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of electronics Mechanical knowledge Knowledge of physics Knowledge of Metallurgy Knowledge of Chemistry

Offered by

IIT Kharagpur via Swayam +1

Certificate

Hydrostatics and Stability

The course on ‘Hydrostatics and Stability’ is provided on the Swayam online educational platform initiated by the ministry of education in India. This National Program for Technology Enhanced Learning online course on the significant aspects of naval architecture is developed and offered by the Indian Institute of Technology Kharagpur.

The faculty development program for the undergraduate level students of ocean engineering is scheduled for a period of twelve weeks and this core course will enable the students to gain three credit points after course completion.

The online training for the ‘Hydrostatics and Stability’ course is guided by the course educator, Prof Hari Warrior from the department of ocean engineering and naval architecture at IIT Kharagpur. This undergraduate and postgraduate level course enables students to understand the principles and techniques of hydrostatics and stability. The eligible students are awarded the course certificate which consists of the logos of NPTEL and IIT Kharagpur.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Introduction to Western Political Thought

The ‘Introduction to Western Political Thought’ online course is an elective course provided on the Swayam online educational platform. This training program is developed and offered by the Indian Institute of Technology Guwahati in association with the National Program for Technology Enhanced Learning.

The western political thought course is instructed by Dr. Mithilesh Kumar Jha, from the department of humanities and social sciences in IIT Guwahati teaching political science. The course deals with the significant philosophers and their ideologies that influenced and shaped western political thought. The training is conducted for twelve weeks and is a part of the humanities and social sciences categorization. The ‘Introduction to Western Political Thought’ is a faculty development program approved by the All India Council for Technical Education. The students of this course will build a strong theoretical foundation of western political ideas and will gain three credit points after the course completion.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of political science Knowledge of Sociology Knowledge of history

Offered by

IIT Bombay via Swayam +1

Certificate

Introduction to interfacial waves

The Introduction to interfacial waves online course is a study about the wider aspect of vibrations and oscillations along with the specific focus on the challenges in hydrodynamic stability. This National Program for Technology Enhanced Learning(NPTEL) online course is developed and offered by the Indian Institute of Technology(IIT) Bombay for students pursuing chemical engineering and mechanical engineering as an elective course.

The course instruction is conducted for twelve weeks and the course educator for this faculty development program is Dr. Ratul Dasgupta, an associate professor from the department of chemical engineering at IIT Bombay.

The students of this online training program are provided with three credit points and a course certificate. The course certificate consists of the logos of NPTEL and IIT Bombay adding more value to it. The online course on introduction to interfacial waves is provided on the Swayam education platform and is a postgraduate level program.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Madras (IITM) via Swayam +1

Certificate

Integrated Photonics Devices and Circuits

The Integrated Photonic Devices and Circuits training program is offered by the Indian Institute of Technology Madras and is a National Program for Technology Enhanced Learning online free course. The online course is a faculty development program approved by the All India Council for Technical Education and is provided on the online free education portal, Swayam which is an initiative of the ministry of education in India.

This elective course is conducted for twelve weeks by students of engineering by Prof Bijoy Krishna Das faculty of the department of electrical engineering in IIT Madras. The course provides three credit points to the students after completing the course successfully. The undergraduate and postgraduate level program enables students to gain a theoretical and practical learning experience of the ideas and aspects of integrated photonics devices and circuits. The students are issued with the course completion certificate with the logos of NPTEL and IIT Madras which explains the acknowledgment.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of electronics Knowledge of physics Knowledge of engineering

Offered by

IIT Madras (IITM) via Swayam +1

Certificate

Stochastic Modeling and the Theory of Queues

The ‘Stochastic Modeling and the Theory of Queues’ training is a National Program for Technology Enhanced Learning online course offered by the Indian Institute of Technology Madras on the Swayam online education portal. This online program is provided for free as an elective course for the students of postgraduate level and research scholars.

The online course on stochastic modeling and queuing theory is scheduled for a period of twelve weeks and the course study is led by Prof Krishna Jagannathan, an assistant professor in the department of electrical engineering at IIT Madras.

The students of this course will get an opportunity to discuss detailed concepts and principles associated with the domain of electrical, electronics, and communication engineering and communication and signal processing. The learners will gain three credit points after completing this ‘Stochastic Modeling and the Theory of Queue program and a course completion certificate which consists of the logos of NPTEL and IIT Madras.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering Mathematical skill Programming skills Knowledge of electronics

Offered by

IIT Kharagpur via Swayam +1

Certificate

Upstream LNG Technology

The ‘Upstream LNG Technology’ training program is a National Program for Technology Enhanced Learning online free course developed by the Indian Institute of Technology Kharagpur. The informative course is provided on the Swayam online education platform for the students of undergraduate and postgraduate levels.

The online training is scheduled for twelve weeks and the course study is guided by Prof Pavitra Sandilya from the cryogenic engineering center in IIT Kharagpur assisted by two other research scholars. This faculty development program is approved by the All India Council for Technical Education and is part of the chemical engineering and physics category. The participants of this online program will gain three credit points and a course completion certificate after completing the course and clearing the exam with the required mandates. The course certificate of the ‘Upstream LNG Technology’ online course consists of the NPTEL and IIT Kharagpur’s logos which makes the certificates more significant and authorized.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Chemistry Knowledge of physics Knowledge of engineering

Offered by

IIT Delhi via Swayam +1

Certificate

Technical Textiles

The Technical Textiles is provided on the Swayam online educational platform for the undergraduate and postgraduate students of textile engineering and technology, and material sciences. This National Program for Technology Enhanced Learning free online course is developed by the Indian Institute of Technology Delhi. The course is a study about the details of technicalities associated with the textile industry and to understand the characteristics and functional properties of textile materials and their implementation.

This faculty development program belonging to the field of textile engineering is a core course organized by the IIT Delhi for twelve weeks. The course educator to guide the students through the course is Prof Apurba Das, from the department of textile technology in IIT Delhi. The course is approved by the All India Council for Technical Education and helps the students acquire three-course credits and a course completion certificate that consists of the logos of NPTEL and IIT Delhi representing their recognition of the ‘Technical Textiles’ online training.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering Knowledge of fashion industry

Offered by

IISc Bangalore via Swayam

Certificate

Enclosure design of electronics equipment

The ‘Enclosure design of electronics equipment’ online course is about the process and techniques of product designing of electronic equipment and devices. This program is a National Program for Technology Enhanced Learning(NPTEL) online certification course and is developed and offered on the Swayam online education portal by the Indian Institute of Science (IISC) Banglore. This faculty development program on electronics design is approved by the AICTE and aids in the skill development of the candidates in the field of electrical engineering, and electronics and communication engineering.

The learners of this course will gain three credit points after completing the course study guided by the IISC faculty, Prof .V.Chalapathi Rao from the department of electronics systems engineering in IISC. The course on ‘Enclosure design of electronics equipment’ by Swayam aids in the discussion of issues in the mechanical aspects of electronic equipment design and prototyping. This online elective NPTEL course is conducted for twelve weeks for undergraduate and postgraduate level students.

12 Weeks

₹ Free

Compare

Skills Covered:

Designing skills Knowledge of electronics Knowledge of engineering

Offered by

IIT Kharagpur via Swayam +1

Certificate

Power system analysis

The ‘Power system analysis’ course is offered by the Indian Institute of Technology Kharagpur through the Swayam online education portal. It is a National Program for Technology Enhanced Learning(NPTEL) online free course for the students pursuing their bachelor’s or master’s degree in electrical engineering.

The course helps the students gain comprehensive knowledge of per-unit systems and circuit system applications. This faculty development program by IIT Kharagpur is conducted for twelve weeks and is approved by the All India Council for Technical Education. The undergraduate-level course is guided by Dr. Debapriya Das from the department of electrical engineering at IIT Kharagpur. The course which is a part of the Electrical, Electronics and Communications Engineering, and Power Systems and Power Electronics domains enables students to earn three-course credits. The course certificate received after completion of the ‘Power system analysis’ online training consists of NPTEL and IIT Kharagpur logos that represent its authenticity.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering Knowledge of physics Knowledge of electronics Civil Engineering skills

Offered by

IIT Madras (IITM) , IIT Roorkee via Swayam +1

Certificate

Glass in buildings: Design and applications

The ‘Glass in buildings: Design and applications’ online course is provided by the National Program for Technology Enhanced Learning in collaboration with the Glass academy. This online course on the role of glass in building is offered on the Swayam online education platform by the faculty from the Indian Institute of Technology Madras and the Indian Institute of Technology Roorkee.

The course study is based on the sustainability aspects of glass and its applications. This online program is an elective course for students of the civil engineering and architectural domain. The online training is held for twelve weeks by industrial professionals and domain experts of diverse potential. This AICTE approved course enables the students to earn three-course credits and a Glass in buildings: Design and applications certificate after completing the program.

Apart from the expert guidance, the course educators for the ‘Glass in buildings: Design and applications’ online certificate courses are Prof. K N Satyanarayana and Dr. E. Rajasekar from the Indian Institute of Technology.

12 Weeks

₹ Free

Compare

Skills Covered:

Civil Engineering skills Knowledge of engineering Designing skills Knowledge of Urban Planning

Offered by

IIT Kharagpur via Swayam +1

Certificate

Design Of Reinforced Concrete Structures

The ‘Design Of Reinforced Concrete Structures’ online course is a study about the aspects of design structures in concrete provided by the Swayam online education platform by the ministry of education in India. The course on concrete design structures is a National Program on Technology Enhanced Learning(NPTEL) online course developed by the Indian Institute of Technology Kharagpur.

This faculty development program for the students pursuing civil engineering and architecture is held for twelve weeks. The course educator for the online program is Prof. Nirjhar Dhang from the department of civil engineering at IIT Kharagpur. This postgraduate-level course is approved by the All India Council for Technical Education and allows the students to earn three credits. The ‘Design Of Reinforced Concrete Structures’ training program is part of the civil engineering and structural design domains. The students will receive the course certificate with NPTEL and IIT Kharagpur logos.

12 Weeks

₹ Free

Compare

Skills Covered:

Civil Engineering skills Knowledge of engineering Mathematical skill Designing skills

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Fluidization Engineering

The ‘Fluidization Engineering’ training program discusses fluidization in association with hydrodynamics and transport aspects for the students and industry professionals to gain valuable experience. The online National Program for Technology Enhanced Learning online course is provided by the Swayam online education platform. This free online training is developed and facilitated by the Indian Institute of Technology Guwahati for students from engineering and science backgrounds.

This faculty development program offered by the IIT Guwahati is organized for twelve weeks. The course educator for the course on fluidization is Dr. Subrata Kumar Majumder, a faculty in the department of chemical engineering at IIT Guwahati. This is an elective course for undergraduate and postgraduate level students which enables them to earn three credit points after completing the online training.

After completion of this ‘Fluidization Engineering’ online program, the eligible students are issued with the course completion certificate that consists of the logos of NPTEL and IIT Guwahati.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of physics Knowledge of Chemistry Knowledge of engineering Knowledge of science

Offered by

IIT Delhi via Swayam

Certificate

Analog Electronic Circuits

The ‘Analog Electronic Circuits’ online course is a study about metal-oxide-semiconductor field-effect transistors (MOSFET) and their applications in analog circuits. This is a National Program on Technology Enhanced Learning(NPTEL) free online training course provided by the Swayam under the ministry of education in India initiative. This program is developed and offered by the Indian Institute of Technology Delhi and the online classes are held for twelve weeks.

This faculty development program is a core course for undergraduate level students belonging to the domain of electrical, electronics, and communication engineering, or control and instrumentation, and VLSI design. The AICTE approved curriculum is instructed by the course educator, Dr. Shouri Chatterjee from the department of electrical engineering at IIT Delhi.

In the ‘Analog Electronic Circuits’ training program, the students will receive three credit points and a course completion certificate which is e-verifiable with the logos of NPTEL and IIT Delhi.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of electronics Knowledge of physics Knowledge of engineering

Offered by

IIT Kharagpur via Swayam +1

Certificate

Industrial Safety Engineering

The ‘Industrial Safety Engineering’ online course is a study about the different aspects and operations of safety involved in engineering systems in the industry. This training program is a National Program for Technology Enhanced Learning online course and is provided on the Swayam online education platform. The elective course for postgraduate level students is offered by the Indian Institute of Technology Kharagpur.

This faculty development program is conducted for twelve weeks for the students belonging to domains of engineering, science, and management. The course on engineering safety systems is approved by the All India Council for Technical Education.

The course educator for the ‘Industrial Safety Engineering’ online training is Dr. Jhareswar Maity, faculty from the department of industrial and systems engineering at IIT Kharagpur. The students in this online course can earn three credits after completion of the program and will receive the course completion certificate fulfilling the required mandates.

12 Weeks

₹ Free

Compare

Skills Covered:

Mathematical skill Knowledge of engineering Knowledge of science Civil Engineering skills

Offered by

IIT Madras (IITM) via Swayam +1

Certificate

Introduction to robotics

The ‘Introduction to robotics’ online course is a study about the state-of-the-art technologies and techniques associated with designing robots and their applications. This National Program for Technology Enhanced Learning(NPTEL) free online course on robotics is provided on the Swayam online education platform. The online training is offered by the faculty of the Indian Institute of Technology Madras.

The program is conducted for twelve weeks and is a core course for the undergraduate and postgraduate level students of design engineering or robotics. The course instructors of this certification program are Dr. T Asokan from the department of engineering design, Prof. Balaraman Ravindran teaching computer science, and Dr. Krishna Vasudevan of the electrical engineering department. This AICTE approved faculty development program enables the students to receive three credits after completing the online training. The ‘Introduction to robotics’ e-certificate is issued to the qualified students with NPTEL and IIT Madras logos on it.

12 Weeks

₹ Free

Compare

Skills Covered:

Robotic skills Automation skills Knowledge of Artificial Intelligence Knowledge of physics Knowledge of engineering Designing skills

Offered by

IIT Kharagpur via Swayam +1

Certificate

Flow Through Porous Media

The ‘Flow Through Porous Media’ National Program for Technology Enhanced Learning (NPTEL) online course describes the classification and application of porous media flow with an understanding of industrial applications. This course is provided on the Swayam online education platform to the students of undergraduate, and postgraduate level from various disciplines of engineering which includes petroleum, biochemical, soil science, geotechnical, and hydrology. This elective course is developed and offered by the Indian Institute of Technology(IIT) Kharagpur.

This faculty development program on porous media flow will take twelve weeks to complete the course. The course instructor for the AICTE approved online training program is Prof. Somenath Ganguly from the department of chemical engineering at IIT Kharagpur. The candidates who take this elective course will be provided with three credits for their undergraduate or postgraduate program. Along with the course credits, the eligible students can get the course certificate which consists of the logos of NPTEL and IIT Kharagpur.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of science Knowledge of Chemistry Knowledge of engineering

Offered by

IIT Guwahati (IITG) via Swayam +1

Certificate

Mass Transfer Operations II

The ‘Mass Transfer Operations II’ online course is part of the National Program for Technology Enhanced Learning(NPTEL) and is provided as Swayam courses for undergraduate level students. This online program on ‘Mass Transfer Operations’ is designed and taught by the faculty of the Indian Institute of Technology Guwahati.

This is a core course for the students and is categorized under the chemical engineering domain. The course instructor for the online training is Dr. Chandan Das from the department of chemical engineering at IIT Guwahati. The course study will focus on the aspects of

Mass transfer and analysis, theoretically and experimentally. The students can earn three credits after completing this course and will be provided with a course completion e-certificate with the logos of NPTEL and IIT Guwahati which can be downloaded from the website.

This ‘Mass Transfer Operations II’ is a faculty development program approved by the All India Council for Technical Education that is organized for twelve weeks.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Chemistry Knowledge of engineering

Exams

Colleges

Predictors

Resources

Quick links

Exams

Colleges & Courses

Predictors

Resources

Exams

Colleges

Predictors & E-Books

Resources

Engineering Preparation

Medical Preparation

Law Preparation

MBA Preparation

Exams

Colleges

Resources

Exams

Colleges

Predictors & Articles

Resources

Exams

Colleges

Predictors

Resources

Exams

Colleges

Upcoming Events

Resources

Exams

Colleges

Resources

Quick Links

Top Streams

Specializations

Resources

Top Providers

Exams

Colleges

Resources

Diploma Colleges

Exams

Colleges

Resources

Exams

Resources

Top Courses & Careers

Colleges

Exams

Upcoming Events

Resources

Other Exams

Exams

Colleges

Top Countries

Resources

Exams

Top Schools

Products & Resources

NCERT Study Material

Popular Searches

Online Certification Courses

Credential

Course Type

By Date

Program level

Provider

Duration

mode of Study

Course Fee

Pricing

Payment Options

Course Level

Certificate availability

Financial AID

Language

Which credential are you looking for?