UIET Kanpur All Questions

Core placements at UIET Kanpur for Metallurgical Engineering are bleak, however it is one of the oldest as well as newest branch of Engineering, with infinite opportunities and extensive research going on in fields of Material Science around the world.

Perhaps after Graduation in Metallurgical from UIET Kanpur you can pursue Masters degree from one of the Top IITs or IISc Bangalore in Materials Engineering. Hence, you will find yourself in midst of a sea of opportunities with Companies like Tata Steel, Microb, Airbus, GE Aviation, Boeing, Vedanta , Jindal Stainless, AM/NS India, Reliance, Applied Materials being regular recruiters at these institutes.

Besides, GATE Exam is also used by various PSUs like SAIL, IOCL,DRDO, Hindustan Copper, BARC, BIS, Nalco as well as RINL for recruiting Metallurgical Engineers.You also have many Off Campus opportunities by top Conglomerates after Graduation in Metallurgical Engineering. Tata Steel annually organizes its Assistant Engineer Trainee Exam, for recruitment of Assistant Managers/Assistant Engineer Position. Arcelor Mittal-Nippon Steel India and Tata Metaliks also have regular Off campus drives for Metallurgical Engineers.

All the best.

Dear student,

As you have secured 50069 overall general merit rank then congratulations you can easily get metallurgical engineering branch in uiet Kanpur.

As per seeing previous year cut off Trends, there is a high chance that you can get your preferred branch in your preferred college during round 1 counselling. Because for last year for Round 1 counselling the highest cutoff closing rank for metallurgical engineering was near about 56000 and your rank is lower than this. So there is a chance that you can get metallurgical engineering branch. But still if you don't get allotted this seat in first round this year, then it is sure that you can get till 2nd round. So you can rest easy, because you will definitely get metallurgical branch in your preferred college that is uiet Kanpur.

Also check out the following link to know the cutoff of uiet kanpur :-
https://www.careers360.com/colleges/university-institute-of-engineering-and-technology-csjmu-kanpur/cut-off?college_id=2488&exam_sub_exam_id=2330&counselling_id=4201&category_of_admission_id=3&caste_id=2&gender_id=1

Also check out our upsee college predictor tool to get an appropriate idea of colleges that you can get on basis of your upsee rank :-
https://www.careers360.com/upsee-college-predictor

Dear student,

As you have secured 50069 overall general merit rank in UPSEE 2020 exam then, congratulations you can get your preferred college.

Now, as per seeing the previous year cut off Trend, you can easily get your preferred branch - metallurgical and materials engineering in uiet Kanpur.

Last year the highest cutoff closing rank for metallurgical and materials engineering branch in uiet Kanpur was - 56048. For cse branch the closing rank was - 8095. And for IT branch the cutoff closing rank was - 16401.
And other branches like electronics and communication engineering had a closing rank of - 18783.

So there is a high chance that you can get only metallurgical and materials engineering branch in uiet Kanpur. And other than this branch you can't get any branch in uiet kanpur.

Also check out the previous year cutoff trend for uiet Kanpur for different branches :-
https://www.careers360.com/colleges/university-institute-of-engineering-and-technology-csjmu-kanpur/cut-off?college_id=2488&exam_sub_exam_id=2330&counselling_id=4201&category_of_admission_id=3&caste_id=2&gender_id=1

Also check out our upsee college predictor tool to get an appropriate idea of colleges that you can get on basis of your upsee rank :-
https://www.careers360.com/upsee-college-predictor

Dear student,

Assuming that you have secured 50069 overall general merit rank in UPSEE 2020 exam then, congratulations you can get your preferred college.

Now, as per seeing the previous year cut off Trend, you can easily get your preferred branch - metallurgical and materials engineering in uiet Kanpur.

Last year the highest cutoff closing rank for metallurgical and materials engineering branch in uiet Kanpur was - 56048 and your rank lies below this closing rank.

So there is a high chance that you can get metallurgical and materials engineering branch in uiet Kanpur.

Also check out the previous year cutoff trend for uiet Kanpur for different branches :-
https://www.careers360.com/colleges/university-institute-of-engineering-and-technology-csjmu-kanpur/cut-off?college_id=2488&exam_sub_exam_id=2330&counselling_id=4201&category_of_admission_id=3&caste_id=2&gender_id=1

Also check out our upsee college predictor tool to get an appropriate idea of colleges that you can get on basis of your upsee rank :-
https://www.careers360.com/upsee-college-predictor

Hello,

With the said rank, you can get B. Tech in Metallurgical and Materials Engineering based on previous year cutoff data. The following ranks are the previous year cutoff data

Round	Opening Rank	Closing  Rank
1	11450.0	56004.0
2	20373.0	57724.0
3	19379.0	82902.0
4	21163.0	82902.0

As the above mentioned data is of previous year cutoff, so this year the cutoff may varies depending on various parameters.

Revert back in comment section, if you have any doubts regarding this.

The best colleges in lucknow are:-

1. SMRS College of Engineering

2. Institute of Engineering and Technology Lucknow

3. Lucknow University

4. SR Group of Institution

5. RR Group of Institution

6. Shri Ramswaroop Memorial University

7. BN College of Engineering

8. Integral University of Engineering

9. Babu Banarasi Das National Institute of of Technology and Management

10. Ambalika Institute of Management and Technology

11. Azad Institute of Engineering and Technology

12. MG Institute of Technology and Management

13. Goel Group of Institution

14. Babasaheb Bhimrao Ambedkar University

15. GRGC Group of Institution.

Here below is link provided to predict your the college

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

Hope this help you..

As per the information provided by you, you have HIGH chances of getting admission into BTech Metallurgical & Materials Engineering at UIET, Kanpur. As per last year's data, the state cutoff rank for this stream last year was 82902. Be assured, you have good chances of getting this stream in UIET, Kanpur.

Best wishes ahead. Thank You.

Hello Priyanshu!

You said you have predicted your rank to be 36k in UPSEE this year. And you will also use EWS Quota for getting seat in your preffered colleges.

I will tell you that you have good chances to get UP Textile Technology Institute, Kanpur in B.Tech Textile chemistry. The previous year cutoff state rank for this branch was 69,169 last year.

You have equally good chances to get seat in four branches in University Institute of Engineering and Technology CSJMU, Kanpur . The branches are B.Tech ECE, B.Tech MECH, B Tech Metallury and Material engineering and B.tech Chemical Engineering. The last year minimum state cutoff ranks for these branches in UIET Kanpur was as follows:-

B.Tech ECE- 50,182

B.Tech Metallurgy and materials engnn.- 56,048

B.Tech Mech- 60,519

B.Tech Chemical Engineering - 72,864

There are other good government and private colleges in which you can get various branches. check them using the link below:-

https://www.careers360.com/upsee-college-predictor

All the best!

Hey there,
You may get admission in University Institute of Engineering and Technology, CSJMU.
But, you will not be able to get in first round.
Last year, for first round closing rank was 42,779.
And fourth round's closing rank was 75,837.
Hence, based on your rank there are very rare chances that you will get admission here in the first round.

Dear student,

As you have secured 50079 general rank in UPSEE then as per your preferred college, that is, University Institute of Engineering and Technology, kanpur (uiet kanpur) you can easily get metallurgical and materials engineering branch if you belong from home state.

The last year cutoff closing rank for metallurgical and materials engineering in uiet Kanpur for general category candidates was - 56048.
And you rank is under 56000, so there is a good chance for you to get your preferred branch in uiet kanpur.

So as you can see you can easily get metallurgical and materials engineering branch from your general category (till last round counseling), without applying for ews category certificate or your category.

Also check out our upsee college predictor tool to get an appropriate idea of colleges that you can get on basis of your upsee rank :-
https://www.careers360.com/upsee-college-predictor