Hindustan University B.Tech 2025
ApplyNAAC A+ Grade & NBA Accredited. QS Gold Rated Institute. Recruiters-Audi, IBM, Amazon, Bosch
Hello Student,
Please post your queries in the question and answer portal of the career 360 app. It will be beneficial for your since you will get answers from Student experts here. You can also post your queries in the comment section of this question only. I will try to answer maximum queries you will post.
Hope this helps you!
Regards.
Hi Priyanshu !
DRDO recruits engineers through the following :
1)Through Gate/NET
2)Through apprenticeship
3)Through their own exam sometimes
4)Through direct interview for contract basis.
Every year RAC of DRDO recruits Scientists in DRDS mostly at entry level (Scientist 'B'). However, depending on the requirements in specialized areas of research & development, limited number of scientists are also recruited in higher grades (Scientist 'C' to Scientist 'H').
Qualifying GATE is mandatory eligibility for Recruitment in DRDO. Other than that, candidates also have to appear for a written descriptive test followed by a personal interview as a part of DRDO recruitment through the GATE 2021 procedure. Candidates will be allowed to work for DRDO only after qualifying for all the stages.
The elgibility criteria goes like this:
So,As you are now pursuing your B.tech in Metallurgical Engineering,it is recommended that you start preparing for the GATE and you must have the knowledge of the above mentioned languages.
After the completion of your degree,you can apply through the DRDO official website along with your GATE score.The short-listed applicants on the basis of their GATE score and other criteria have to appear for a written test and a personal interview (PI).
All the best !! Feel free to ask if you have any more queries.
Hello Aspirant,
You have good chances to get admission into University Institute of Engineering and Technology CSJMU, Kanpur
And also you have good chances to get B.Tech Metallurgical and Materials Engineering.
Other branches you'll get there are as follows:-
You can also get many other good colleges with your rank.
For further analysis use the college predictor tool:-
https://www.careers360.com/upsee-college-predictor
Hope this helps!
Good luck!
Thank you.
Hi Priyanshu, the choice filling modification are available in 3&4th rounds as well. The general starting rank is from 2-3k and the cut off rank varies from 5-8k each year. So there is a chance you may be allotted the college. Coming to the placement records, the UIET holds a rating of 4.3/5 as per placement. The placement opportunities are great. Top recruiters are TCS, Infosys,HCL, PSUs like Gail, NTPC, DRDO,SAIL etc. The metallurgical engineering faculty is excellent as they include professors from IIT Kanpur. Overall it's a great college. All the best.
Dear Aspirant you can go through the previous year cut off of UIET on https://www.careers360.com/colleges/university-institute-of-engineering-and-technology-csjmu-kanpur/cut-off?college_id=2488&exam_sub_exam_id=2330&gender_id=1&counselling_id=4201&category_of_admission_id=3&caste_id=2
As per 2019 56000 was the closing rank of the course so there is a chance of you bagging a seat in further rounds. Though the placements in UIET are not great but you can pursue post graduation from top institutions like IISC, IITs via gate and get a chance to work with Tata Steel, jindal stainless, vedanta, GE aviation etc which are top recruiters in this field. Also via Gate you can get an entry in to reputed PSUs like IOCL, SAIL, DRDO, BARC, BIS, NALCO etc. Also Tata Steel annually organizes its Assistant Engineer Trainee Exam, for recruiting the people asAssistant Managers/Assistant Engineers. Arcelor Mittal-Nippon Steel India and Tata Metaliks often conduct regular Off campus drives for Metallurgical Engineers.
All the best.
Hello aspirant,
Congratulations for the rank that you get in UPSEE 2020. According to last some year cut offs yes you have very good chances of getting admission into UIET Kanpur in metallurgical engineering but the chances of getting it in first round are very because the cut offs for last round are very much near to the your rank so that you have possibilities of getting seat for metallurgical engineering is in last rounds. You should also go through the last years cut offs which will be helpful for you definitely. link for cut offs is provided below.
Also I would like to request you to go through our college predictor tool which will be very helpful for you in predicting your chances in various institutions of UP as per your preferences.
https://www.careers360.com/upsee-college-predictor
Best of luck.
Hello Priyanshu!
About 1,60,610 students applied for UPSEE-2020, from which only 1,34,505 candidates appeared for the exam. About, 1,23,027 candidates qualified UPSEE-2020 exam. You can check the statistics of the UPSEE-2020 exam using the link below:-
You didn't mention your category, so I consider you belong to the open category. According to the previous year's data of closing ranks in various branches in the University Institute of Engineering and Technology CSJMU, Kanpur ; it is predicted that you have good chances to get seat for B.Tech Metallurgical and Materials engineering with your rank. The last year's closing rank for this branch was 82,909 for the open category . So, you can most probably secure a seat by the second counseling round in the worst case.
You can predict your chances in other branches too in other top colleges, using the link below:-
https://www.careers360.com/upsee-college-predictor
All the best!
Hello
In the second year, change of branch may be allowed to a limited number of students
on the basis of their academic performance in the first year subject to the departmental
strength constraints. No department shall exceed the maximum sanctioned strength or
fall below 60% of the sanctioned strength in a particular branch of that year as a result
of branch changes. Branch change is a privilege and not a right and will be considered for meritorious students subject to the constraints mentioned above. Requests for change of branch should be made to the Chairperson, APEC, at the end of the secondsemester. The students seeking branch change must not have any backlog and musthave a CPI equal to or greater than 8.00 at the end of the first two semesters.
Good Luck.
This institute is quite good in infrastructure,it has a huge and proper managed library and other facilities are also quite good in college,the area of building is properly managed in a way to make sure that there is no issue comes with anything in the future...
The campus is astonishing . Every thing is well maintained . Infrastructure is great . Free WiFi campus, smart boards and various facilities. It has well qualified faculty with an environment that encourages you to work hard . Library is open from 10 am go 9 pm . Aur conditioned library is there. Hostel is also good with neat and hygienic food quality.
Yeah there is all necessary infrastructure that a common student dream for. Class furniture are somewhere dull but every class is good. Library open from 10am to 9 pm. AC available in library. Hostel is good but nit in tge sense of food.
NAAC A+ Grade & NBA Accredited. QS Gold Rated Institute. Recruiters-Audi, IBM, Amazon, Bosch
Ranked #42 among Engineering colleges in India by NIRF | Highest CTC 50 LPA , 100% Placements
Recognized as Institute of Eminence by Govt. of India | NAAC ‘A++’ Grade | Upto 75% Scholarships
Ranked #1 Among all Private Indian Universities In QS Asia Rankings 2025 | Scholarships worth 210 CR
Apply for IIM Indore Master of Management Studies program
100% Placement Record | Highest CTC 42 LPA | NAAC A++ Accredited | Ranked #68 in India by NIRF Ranking 2024