Instrumentation and Control Engineering

Instrumentation and Control Engineering

Degrees offered: B.E /B.Tech, Diploma, Dual Degree, M.E /M.Tech., M.S, Ph.D

What is Instrumentation and Control Engineering

Instrumentation and Control Engineering is a specialization in the field of instrumentation, control, design, and operations of automated equipment or machines used in industries.

An instrumentation and control engineering graduate is responsible for improving the productivity, stability, reliability and optimization of instruments in any industry.

They also make sure that the systems and processes of the industry operate effectively and safely. Students with this Instrumentation and Control Engineering degree have good opportunities in the electrical and mechanical sector.

Only a few choose this branch of Instrumentation and Control Engineering without knowing the golden opportunities it offers after completion. As a result, only a few graduates come out to the industry.

They are selected with no objection because the requirement is more, and the graduates are comparatively less. Both governmental and private industries hire instrumentation and control engineering graduates.

Eligibility Criteria (UG & PG) of Instrumentation and Control Engineering

For Undergraduates

  • Minimum eligibility for pursuing Instrumentation and Control Engineering is 65% marks in 10 +2 classes in the relevant stream.
  • The selection process differs between various institutions. Some universities or colleges offer admissions based on +2 scores and others through separate entrance exams.
  • For students from a reserved category, the benefits are applicable after they present the reservation certificates to competent authorities.
  • Most of the institutes conduct exams like JEE Main, UPSEE, WBJEE, and OJEE to give admissions.
  • The candidates must have to qualify by scoring minimum qualifying marks.


For Postgraduates

  • Post Graduation in Instrumentation and Control Engineering demands B.E/B.Tech in electrical engineering or B.E./B.Tech in mechanical engineering from a recognized institution.
  • Admission is merit-based, or entrance exam based and differs from college to college.
  • The above-mentioned eligibility criteria is common among most of the colleges across the country.


Entrance Exam for Instrumentation and Control Engineering

JEE Main: Joint Entrance Examination Main is for admission to national institutes of technology and other colleges which are called as centrally funded technical institutes.  The registration is online, and the exam has two phases. The first exam takes place during April and second takes place by the first week of September. Qualified candidates get admission in national institutes.

CET: Common Entrance Test is conducted for admission of students in medical, dental and engineering colleges of various states of India. The exam takes place twice in a year. The mode of the exam is online. Candidates who clear CET get admissions to best engineering colleges across India.

WBJEE: West Bengal Joint Entrance Exam is a state-level exam conducted only once in a year.  45% marks with computer science as mainstream in +2 examinations is the eligibility for candidates to appear for WBJEE. The duration of the exam is 2 hours and 30 minutes. The exam is conducted offline.

UPSEE: Uttar Pradesh State Entrance Examination is conducted for admission into 811 reputed colleges. The duration for the engineering UPSEE exam is 3 hours. The exam usually takes place in September.


Post Graduate Entrance Exam

GATE: Graduate Aptitude Test in Engineering is conducted nationally to postgraduate courses in engineering at IISc and IITs. Usually, it is conducted in February.

Scope of Instrumentation and Control Engineering in India and Abroad

Students who are interested in working with machines and other equipment are suitable for this Instrumentation and Control Engineering course. Those who have an analytical mindset are welcome. It would be a fascinating opportunity for those who want to work in Indian Engineering Services.

Instrumentation and control engineering graduates have a plethora of options to choose from. After graduation equipment manufacturers, installation units, maintenance firms and equipment designers hire them.

They develop electrocardiograph equipment for hospitals and computed tomography scanners for security systems. These are only some among the various career prospects available for instrumentation and control engineers.

A significant role in every successful aeronautical research project is played by the instrumentation and control engineering graduate.

Because of its interdisciplinary nature, the course bestows opportunities inside and outside the industry for graduates.

There is a huge scope for instrumentation abroad. Graduates can get into diverse industries like petroleum, different chemical factories, and steel manufacturing factories.

Another option is working in Middle Eastern countries where there are refineries, oil and gas sectors.

Course Fees Instrumentation and Control Engineering

Minimum Fees Maximum Fees
Private Government Private Government
UG
74.28 K
B.E /B.Tech in Instrumentation and Control Engineering at NSS College of Engineering, Palakkad
6.00 K
B.E /B.Tech in Instrumentation and Control Engineering at Government Engineering College, Rajkot
15.05 Lakhs
B.E /B.Tech in Instrumentation and Control Engineering at Thapar Institute of Engineering and Technology, Patiala
8.44 Lakhs
B.E /B.Tech in Instrumentation and Control Engineering at Netaji Subhas University of Technology, New Delhi
PG
19.98 K
M.E /M.Tech. in Instrumentation and Control Engineering at NSS College of Engineering, Palakkad
9.60 K
M.E /M.Tech. in Instrumentation and Control Engineering at Jadavpur University, Kolkata
4.49 Lakhs
M.E /M.Tech. in Instrumentation and Control Engineering at Birla Institute of Technology, Mesra
4.98 Lakhs
M.E /M.Tech. in Instrumentation and Control Engineering at Delhi Technological University, Delhi
DIPLOMA
---
Data not available
53.00 K
Diploma in Instrumentation and Control Engineering at Institute of Engineering and Rural Technology, Allahabad
---
Data not available
59.00 K
Diploma in Instrumentation and Control Engineering at Sant Longowal Institute of Engineering and Technology, Longowal

Course Subjects

 Some of the subjects covered in Instrumentation and Control Engineering are:

  • Engineering Mathematics
  • Electrical and Electronic Measurements
  • Control Systems and Process Control
  • Analytical, Optical and Biomedical Instrumentation
  • Basics of Circuits and Measurement Systems
  • Transducers, Mechanical Measurement and Industrial Instrumentation
  • Analog Electronics
  • Digital Electronics


Postgraduate studies in instrumentation and control engineering are about advanced process control and guidance methods in modern industries. Some subjects in postgraduate instrumentation studies are:

  • Advanced Mathematical Techniques
  • Sensors
  • Adaptive and Robust Control Systems
  • Digital Electronics
  • Experimental Methods and Analysis
  • Optical Instrumentation
  • Image Processing
  • Electrical Circuits
  • Biomedical Instrumentation

Careers in Instrumentation and Control Engineering

There is a myriad of career possibilities for instrumentation and control engineers. Candidates who have graduated can choose from any of the options available. Though the course is less popular, it has bright opportunities for graduates.  Appealing job opportunities are available in electrical, mechanical and electronics.

Both Government and private sectors hire Instrumentation and Control Engineering. Key recruiters in this field are robotics, automation, space, manufacturing industries and chemical factories.

Multinational companies and government agencies offer comparatively better salary packages than all other companies as experience pays in case of every career. Experience in Instrumentation and Control Engineering  escalates your pay.

Job Profiles and Top Recruiters

Instrumentation and Control Engineering Job Profiles

As mentioned earlier Instrumentation and Control Engineering graduates are responsible for the effective and efficient working of industrial systems. There are numerous roles that an instrumentation engineer can play. Some of the job roles and their description are as follows,

Job Profile

Job Description

Materials Specialist

A material specialist makes sure the right material is used for the right job and involved in developing, maintaining and evaluating materials. 

Can also be involved in research and development of anything.

Mining Engineer

A mining engineer makes sure that the underground resources such as oil, minerals and oil are extracted safely and efficiently. 

Assess the feasibility and commercial benefit of new sites.

Manufacturing Engineer

A manufacturing engineer works to improve the process of making products like food, plastics, and pharmaceuticals.

He/she designs new equipment, processes and systems. Purchases and installs the equipment.

Design Engineer

Design engineers study and research ideas for new products and the equipment used to make them. They decide if a design will be cost-effective and work efficiently.

Quality Control Technician

Quality control technician is responsible for testing materials and ensures they fulfil all the laws of a firm and industry standards.

Instrumentation Control Specialist

An Instrumentation and Control Engineering  specialist is responsible for designing, developing and managing the equipment. Make sure that these instruments work effectively.

Process Technician

Process technician works to plan, analyze and control the quality of manufacturing processes.


Top Recruiters for Instrumentation and Control Engineering

Top recruiters are from areas like railways, construction companies, telecommunication sectors, automotive companies, oil and gas sectors, power generation and energy companies. Companies which manufacture ammeter, voltmeter electrocardiograms and various other equipment also hireInstrumentation and Control Engineering graduates. Some of the top recruiters are,

  • National Instruments
  • Tata Consultancy Services
  • Larsen & Toubro
  • GAIL
  • Invensys
  • Siemens
  • Suzlon
  • Bechtel
  • Whirlybird
  • NTPC

And many more.

Required Skillset for Instrumentation and Control Engineering

Creative problem-solving skills and troubleshooting skills: Instrument failure and lack of spares, usage of equipment in a wrong way, incorrectly specified instrumentation or incorrectly installed installation all are common Instrumentation and Control Engineering problems. Strong problem-solving skills help engineers out of these.

Critical thinking: Critical thinking is essential for all branches of engineering especially in mechanical and technical development branches

Knowledge in high-level computer technology: Matlab, Labview, and Arduino are a few software that instrumentation and control engineering students must know. In situations where they need to draw some layouts, panel drawings and GA drawings and wiring drawings, AutoCAD or any other computer-aided design software are needed.

Eyes that denote minute details are required for Instrumentation and Control Engineering. Good communication skills, interpersonal skills and ability to motivate others are needed when working with a team.


Above mentioned are mostly soft skills, contrary to those installation details, C design and start-up used in instrumentation and control jobs are skills in demand. Instrumentation and Control Engineering must have the ability to measure the flow of temperature and pressure control.

Course Curriculum for Instrumentation and Control Engineering

Bachelor’s degree in instrumentation and control engineering is a 4-year course which is a branch of electrical and electronic engineering. The course is beneficial for further studies like M.E and PhD, the core objective of it is the design and configuration of automated systems.

In the era of automated systems, instrumentation professionals are going to increase sharply. Students learn about adding sensors to the systems which have recorders, transmitters, and display or control systems.

Several projects are covered in the course to understand how a typical industry works. They will learn how the instruments are maintained and operated in automation.

The question have been saved in answer later, you can access it from your profile anytime. Access now

Explore Engineering colleges in other popular locations

Download the Careers360 App on your Android phone

Regular exam updates, QnA, Predictors, College Applications & E-books now on your Mobile

Careers360 App
  • 150M+ Students
  • 24,000+ Colleges
  • 500+ Exams
  • 1500+ E-books
  • Economic Times
  • Financial Express
  • Firstpost
  • Livemint