Amity University | M.Tech Admissions 2025
ApplyRanked amongst top 3% universities globally (QS Rankings).
Hello Raima,
The GATE cutoff score for non PWD candidates in 2018 were as follows on the basis of the category:
General - 483
OBC - 430
SC - 335
The cutoffs for 2019 should be approximately the same as the difference in difficulty level was not much.
Some additional information about GATE :
Graduate Aptitude Test in Engineering (GATE) is a national-level post-graduate entrance exam that is jointly conducted by the seven IITs (Bombay, Delhi, Kanpur, Guwahati, Kharagpur, Madras and Roorkee) and the Indian Institute of Science (IISc), Bangalore for admission to M.Tech programmes offered by government as well as many private institutes.
GATE 2019 was organized by Indian Institute of Technology (IIT) Madras in online mode on February 2, 3, 9 and 10, 2019.
COAP is conducted by IITs (IIT Madras in 2019) to facilitate admissions of aspirants in M.Tech programs of IITs. The candidates after applying to the IITs of their choice on the basis of the GATE scores, have to necessrily apply for COAP.
CCMT is conducted for admissions to M.Tech programs of NITs by different NITs (NIT Rourkela in 2019).
For more information about cutoffs of IITs and NITs and PSU recruitment, follow the below links:
Https://engineering.careers360.com/articles/psu-recruitment-through-gate
Https://engineering.careers360.com/articles/gate-cutoff-for-iits
Https://engineering.careers360.com/articles/gate-cutoff-for-nits
Hello Anmol,
According to previous years cutoff of GATE ( for metallurgy ), the IITs with their required cutoff are listed below :
1. IIT Kharagpur - In 2017 the cutoff was 432 and in 2016 the cutoff was 628
2. IIT Kanpur - In 2016 the cutoff was 544
3. IIT Madras - In 2016 the cutoff was 556 and in 2017 the cutoff was 526. In 2018 it was 593.
Note : The above mentioned marks are for general category.
If you want more information then you can go through the links given below -
https://engineering.careers360.com/articles/gate-cutoff-for-iits
https://engineering.careers360.com/articles/gate-cutoff-for-iit-madras
https://www.careers360.com/university/indian-institute-of-technology-kanpur
https://www.careers360.com/university/indian-institute-of-technology-kharagpur
I hope that you get your dream college. Just dont get down , and apply for other colleges to.
If you have any queries feel free to contact us.
Good luck !!!
Hey Vishal,
DTU (Delhi technological University ) is one of the top university that offers BBA in it's New Campus( East Campus). Given option one should always go for DTU rather than IIMT. Also IIMT is a private college whereas DTU is a government college with a strong backing from AAP.
Talking about the placements, DTU has always been in trend for placement scenarios and will definitely build a better placements this year for BBA as the course has started recently and have no good details. Moreoff the placements depends on the person's capabilities and not on the College mostly.
The faculty of the DTU college for BBA is highly qualified along with great experience of teaching in top colleges. So if given option one should go for DTU.
Hi,
After completing your naval architecture course, you can join Indian navy, coast guard as an officer.
Placements at IIT madras
Naval Architecture & Ocean Engineering- Rs. 4.4 lakhs to Rs. 20 lakhs per annum
Highest Package Offered (International)
$129,500 per annum
Highest Package Offered (Domestic)
Rs 30 lakh per annum
Talking about IITM JANAKPURI particularly. You might get an admission in 4th round of counselling if the last year's cut off is kept in mind.
last year's cut off:
GNGND
Min Rank -2359
Max Rank - 2636
OBGND
Min Rank -2430
Max Rank - 2430
Hi Narayanam
JEE Advanced is one of the toughest competitive exams in the nation. Moreover the trends of this exam are known to change every year.
The mark vs rank analysis of the test varies from year to year and fluctuates a lot. So nothing can be said about the rank from marks until the results are out.
Once the ranks are out some branch might be predicted.
Dear B Sumit
As you had mentioned your rank AIR 315 , then by looking into previous years cutoff for
Control and computing specialization is 510 General.
OBC 459
SCST 340
So by seeing last year cutoff you should get admission into IIT Bombay.
For IIT Madras the General cutoff for control and instrumentation is 779
So you get a strong chance to get any of them with your, favourite specialization.
Congratulations IItian.
As a second-year BS Data Science student at IIT Madras, I am truly impressed by the vibrant campus. Modern lecture halls, advanced computer labs, and a vast digital library make studying here enjoyable. There are comfortable reading lounges and the greenery around gives a calm atmosphere for focusing on my studies.
The infrastructure of my campus is very nice and provides the best environment for studying. Also my campus has all the necessary facilities like wifi , air conditioners etc which are fully functional and also the campus is hygienic.
IIT Madras is one of those places you hear about and imagine high-tech labs, brilliant minds, and a campus buzzing with activity. The library is huge and has pretty much every book or journal you could need. Hostels are decent, though some are better maintained than others, and the campus facilities like canteens, sports grounds, and Wi-Fi are reliable and student-friendly.
Ranked amongst top 3% universities globally (QS Rankings).
NAAC A+ Accredited | Scholarships worth 5 CR
Apply for Online MBA from UPES
Among Top 30 National Universities for Engineering (NIRF 2024) | 30+ Specializations | AI Powered Learning & State-of-the-Art Facilities
Ranked #42 among Engineering colleges in India by NIRF | Highest Package 1.3 CR , 100% Placements | Last Date to Apply: 31st August | Admissions Closing Soon
Apply for an Online MBA from Amity Online.
Last date to apply for IIT Madras BS Degree programme is September 4, 2025.
GATE 2026 registrations for MTech admissions start from August 28, 2025.