IIT Patna All Questions

Hi Vivek,

The Metallurgy department in IIT Patna is quite a new branch. Moreover it is difficult to judge the placement scenario for so new a branch based on past details. Perhaps at the same rank, you might be making into Metallurgical Engineering at IIT BBSR, or Mining Machinery or Environmental at IIT ISM Dhanbad or Ceramic Engineering at IIT BHU. These have better placement prospects, you can try for these.

In case, you're not making any, you might consider IIT Patna for Metallurgy.

Hope this helps.

Dear Aspirant,

See IIT Patna has higher ranking.

Median Salary of IIT Patna is 14 lakhs.

Median Salary of NIT Jamshedpur is 6.80 lakhs.

FEES-

IIT Patna :8.45 Lakhs

NIT Jamshedpur :7.16 Lakhs

Find more about these two here:

https://www.careers360.com/university/indian-institute-of-technology-patna/btech-metallurgical-and-materials-engineering-course

https://www.careers360.com/university/national-institute-of-technology-jamshedpur/btech-metallurgical-and-material-engineering-hons-course

Find a detailed comparison between these two here:

https://www.careers360.com/compare-colleges?college=107-146-course=268816-7833

You might either select for RF & Microwave at IIT KGP and opt for sliding, incase you think you have better options like VLSI at some of the Top 8 IITs. Honestly speaking, RF & Microwave students have lower prospects when it comes to placements. You do have options still, but most of the Electronics Companies open for VLSI & Embedded Systems Stream. You still have options with Software, Analytics, Data Science, Edtech Firms and Startups, but youll have a very effective and interesting college life at KGP with its diverse culture and excellent faculty and research facilities. Incase youre planning Government Jobs, PSUs or joining Public Research Organizations like DRDO, ISRO, BARC, CSIR where effectively RF & Microwave Technology comes in real use, IIT KGP is the best place. Even if youre planning a PhD in future, this is the place for you.

Hello,

To get admission into any of IITs, you will have to appear for JEE ADVANCED. To predict the proper rank is not possible as, Cutoffs fluctuates every single year. And Cutoffs are different for every branch. Cutoffs are Depends of various factors like-

1. Previous year Cutoffs trend

2. Number of seats in the courses offered by the Institutions

3. Number of Candidates appeared for the exam

4. Difficulty level of the question paper

As you're an OBC- NCL Candidate, You will have to score 9 as Minimum percentage of Marks in each Subjects, and you will have to score minimum 22.5 as Minmum percentage of Aggregate marks. This is the minimum percentage of Marks required for inclusion in JEE ADVANCED 2021 rank list

Please go through this link to see the minimum percentage as catehory and, previous year Cutoffs of IIT Patna (use this Cutoff for reference And predict your rank) as per branch and Category-

https://www.google.com/amp/s/engineering.careers360.com/articles/jee-advanced-cutoff-for-iit-patna/amp

Good Luck.

hi,

to apply for phd course , the candidates must have completed master degree course on m.tech course in relevant discipline , gate score is important to select for phd courses, you have to separately apply for each of the iits, or nits or any other central funded institute by checking the eligibility criteria, availability of subjects offered for phd courses.

hope it would help.

Hello Aspirant,

First of all let me make you clear that in IITs there is no reservation for Home state quota instead there is only All India quota and admission will be done only on the basis of your category or CRL rank.

As we go through the latest cut-off of 2020 then it shows that the closing rank for OBC category was 1108 for CSE branch in IIT Patna. See it is quite difficult to tell you about exact marks to score because for JEE-Advance no maximum marks are fixed but yes with regards to JEE-Advance 2021 if you secure your AIR in JEE-Advance under top 1100 in OBC category then there are good chances for you to get CSE branch in IIT Patna.

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your JEE-Main score, category, and state you can use JEE-Main College Predictor :-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

As you are preparing for JEE-Main or JEE-Advance 2021 the I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main or JEE-Advance 2021 :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

I hope this information helps you.

Good Luck!!

From view of career scope and prospects I would suggest you to prefer Electrical Engineering at Delhi Technological University over IIT BHU Pharmaceutical and IIT Patna Metallurgy. DTU has excellent infrastructure, faculty and research facilities and is one of the Best when it comes to Electrical Engineering in North India, next to IIT Delhi and IIT Roorkee. The institute has a very strong employer outlook and most of the Top Companies like Tata Motors, Texas Instruments, Adobe, Microsoft, Google, Intel are regular recruiters from Department of Electrical Engineering.

However, this is my perception, incase you are seriously interested in pursuing Engineering from One of the IITs  I would suggest you to prefer IIT BHU over IIT Patna, as you will have a better exposure and more opportunities. Secondly, Metallurgy is a good branch if taken in one of the Older IITs, whereas the MT Department at IIT Patna is just a couple of years old and lacks in experience, projects and expertise in faculty and research. At IIT BHU, you  will have a number of Non Core Opportunities in IT, Software, Finance and Analytics domains besides getting a fair chances to securw a Branch Change in first year, perhaps the grading system at IIT BHU is one of the Most relaxed among most IITs.

hey!

IITs are considered the best institues in India for engineering courses. ECE in IIT bhubneshwar is worth trying as the placement opportunities are very good , around 80% with maximum package of 32 LPA.

IIT Patna also provides good facilities to students , good placement opportunities are there, average package goe upto 5-6 LPA in companies like Amazon, Microsoft etc.

But if you wish to job in both Electrical industry and software field then you must join ECE and if you have interest only in software then join CSE.

Thankyou

hello aspirant

the documents required for admission in IIT patna are

class 10 marksheet

class 12 marksheet

self attested photographs

date of birth proof

signature

resedential proof

after uploading you have to pay the fee regestration

IIT patna is great iit in terms of placement, academics, infrsrtructure, facultiies, facilities etc