BIET Jhansi All Questions

hiii ,

if you do not report physically you should contact the college immediately with a valid reason of you not visiting there physically , otherwise they may cancel your application and you seat .

for more colleges through jee mains you can use the college predictor - https://engineering.careers360.com/jee-main-college-predictor?ici=cp-listing_engineering&icn=JEE-Main-College-Predictor

Hi,

B.I.E.T. Jhansi is a very nice place for those who are very good at doing things independently i.e. there is no burden of classes so if you want to prepare for upsc and other exams you will have ample of time.

Secondly placement is meagre ( that is also the case with prestigious colleges too) but institute hold a positive feedback from employers thanks to alumni.

Points to remember :-

1: NO Campus placement for core students(Mechanical, Civil, Electrical, Chemical).

2: You may go for GATE or other civil services exam during or after your b.tech.

3:You have lot of time to prepare as it’s a typical government college so not a plenty of lectures.

4 :Faculty is good and supportive.

5: I am not sure about practical knowledge as they have labs and I have seen them performing practicals several times.

Placement offers in civil engineering are the least here, and it is around 10-40%. The highest salary offered is Rs. 70,000 per month. The average salary offered is Rs. 35,000 per month. Students prefer to learn coding here because companies like Wipro, TCS, etc., offer a number of opportunities. In recent batch, almost 5 students are given internships with a stipend of Rs. 30,000 by various companies such as Byju's, TCS, etc.

For more information, use link - https://www.careers360.com/colleges/bundelkhand-institute-of-engineering-and-technology-jhansi/placement

Hope this helps.

Good luck.

hello kumarabhi,

For all students , the total fees structure for btech in mechanical engineering in Biet jhansi is 2.89 lakhs.

Although you can also try for fee waiver options in this college as you belong to sc category .

You can also check other colleges with the help of college predictor tool here :

https://engineering.careers360.com/jee-main-college-predictor?utm_source=qna&utm_medium=jee_cp

I hope that this will help .

Dear aspirant,

I would recommend you to go for ece in biet Jhansi as the colleges above neither comes in tier 2 or tier 3 colleges so it would be better if you take higher branch in lower cut offs colleges.

Apart from this in terms of placements and faculty iet lucknow is on a better place but you are getting civil or electrical so it is better to join non branch in biet Jhansi.

Although various factors are considered while deciding the cut offs like number of candidates appearing in the examination, number of vacant seats in college, previous years cut offs and difficulty level of the paper.

For more information you can check out the link given below-

https://www.careers360.com/colleges/bansal-institute-of-engineering-and-technology-lucknow/amp

hii ,

the fee for biet jhansi is approx 250000

and the highest package is 1800000PA offered in 2021

also check more collges through jee rank

for finding more colleges through jee rank use the college predictor tool - https://engineering.careers360.com/jee-main-college-predictor?utm_source=qna&utm_medium=jee_cp

Hello,

Both  Bundelkhand Institute of Engineering & Technology (BIET) Jhansi and Kamla Nehru Institute of Technology (KNIT) Sultanpur are under State Government of Uttar Pradesh and holds good reputation in industry.

But if we compare many fields BIET Jhansi is better than KNIT.

In terms of placement, both colleges will not satisfy you.

In KNIT 60 - 70% student get placed 4 LPA and the highest package is 10 LPA.

In BIET 70 - 75% student get placed 3.5 LPA and the highest package is 8 LPA.

For information about KNIT Sultanpur do check below:

https://www.careers360.com/colleges/kamla-nehru-institute-of-technology-sultanpur/placement

For information about BIET Jhansi do check below:

https://www.careers360.com/colleges/bundelkhand-institute-of-engineering-and-technology-jhansi/placement

Thank you

Hello,

Congratulations on getting such good colleges. I will give you a preference list which will comprise of all these factors:

• Overall ranking
• Infrastructure
• Location/accessibility
• Branch that you are been offered(Core/interdisciplinary)
• Placement opportunities
• Industry Exposure

The preference order you should consider is BIET over KNIT.

• B.Tech Computer Science and Engineering at KNIT Sultanpur had the highest placement percentage of 65%
• EPAM, TCS, WIPRO, and other service-based companies come in this college and the average placement is 4lpa and the highest package is 10lpa.
• B.Tech Computer Science Engineering at BIET Jhansi had the highest placement percentage of 70%.
• At BIET JHANSI, the placement of this year is started with finalizing the schedule of dream companies like ADOBE,TECH MAHINDRA, HCL COMNET, SYNERGY TECH, NECHCL ST, DSCL, JINDAL,ADTEL, L&T, SAMSUNG etc. the highest package offered this year is staggering Rs. 7.89 Lacs/year excluding benefits.

I would also like to add here that an engineering course should be very much taken with an interest in the field so I would suggest you to consider that factor and if you are not aware of the branches mentioned look them up on the internet more reliable will be to go through the syllabus on the respective colleges' website. An interest in the field is the key factor in deciding how your 4 years of college will be and what opportunities you will land for yourself.

For information about Courses & Fees, Admissions, Placements, Reviews, Facilities and Qna about KNIT Sultanpur do check below:

https://www.careers360.com/colleges/kamla-nehru-institute-of-technology-sultanpur/placement

For information about Courses & Fees, Admissions, Placements, Reviews, Facilities and Qna about KNIT Sultanpur do check below:

https://www.careers360.com/colleges/bundelkhand-institute-of-engineering-and-technology-jhansi/placement

Good luck, hope it helps!!

Hello Khushi,
I hope you're well. As per the rank you mentioned it's a very low chances to get IET Lucknow, KNIT Sultanpur and BIET Jhansi or in any other govt colleges but you can get some best private colleges like:
1. AK Garg Engineering College
2. JSS Noida
3. GL Bajaj
And many more.
You may predict best colleges according to your rank and percentile through our college predictor. Our team will help you to get admission in best colleges.
https://engineering.careers360.com/jee-main-college-predictor?utm_source=qna&utm_medium=jee_cp

Hope this will help you.

Thank you!

Hello

BIET JHANSI is better to KNIT.

In the event that you need to appreciate time outside school additionally or needs to get ready for aggressive tests at that point go for BIET JHANSI as I likewise has a place with JHANSI and can say that Jhansi is superior to sultanpur. City is very huge with some great instructing, bunches of showrooms, cafeteria with domino's and pizza cabin with great taste. In the event that you are branch explicit, at that point settle on any and on the off chance that you need to see the school in general independent of area of that school or city or some other offices at that point go for weave else pick BIET. In any case, in the event that you can select private schools keeping situation in perspective, at that point join AKG or jss and so on NCR universities.

Both have likenesses in situation factors.

Hello aspirant

hope you are doing great. As per your query  I would glad to tell you that both are branches of BIET jhansi are very good . Coding culutre of cse branch is more better than IT branch due to students crowd. But if you are hard working students ,have keen in data structure and algorithms then you can go for BIET jhansi IT branch and will get placement in a product based company

Hope you found this answer helpful. Good luck for your future