Online Engineering And Architecture Courses & Certifications

Agribusiness is a kind of business that concentrates on handling, distributing, promoting, and distributing agricultural products. Agribusiness aims to enhance operations to maintain reasonable rates. Challenges of Agribusiness Management certification course is developed by Bocconi University and taught by Vitaliano Fiorillo - Lecturer of Operations & Technology Management at SDA Bocconi School of Management, which is made available by Coursera.

Challenges of Agribusiness Management online training contains 5 hours of learning resources that focus on providing an in-depth understanding of the challenges and opportunities involved with agribusiness. With the Challenges of Agribusiness Management online course, individuals will be taught about concepts and strategies involved with agribusiness sustainability, agricultural system, agro-system, prosumerism, commoditization, service innovation, and much more.

The Robotics: Capstone Online Course is the 6th course in the 7 course series of Robotics Specialization provided on the Coursera website. In the specialization programme, candidates will get an opportunity to find practical solutions for real-world problems using the techniques learned throughout the course. 

The Robotics: Capstone Certification Course is conducted by the University of Pennsylvania under the guidance of Sid Deliwala belonging to the Department of Electrical and Systems Engineering. The open online course will equip learners with mathematics and programming skills and methods used by researchers in robotics engineering labs. 

The Robotics: Capstone Training Course can be scheduled according to the preferred timelines of learners. The 100% online course is only open to learners who have completed the first 5 courses of the Robotics Specialization. The course will be taught with the help of video lectures and academic readings, and earn a digital shareable certificate at the end.

The Robotics: Aerial Robotics Certification Course is the first out of six of the Robotics Specialization Programme offered by the faculty of the University of Pennsylvania. The course provides a detailed introduction to the mechanics of flight, the working of quadrotor flying robots and the robotics engineering mechanism that supports other micro aerial vehicles.

The Robotics: Aerial Robotics Online Course will provide a window towards different dynamic models, device controllers, and planners operating in three dimensional environments. Through this 100% online course, learners will be able to witness real world examples from the immensely growing drone industry along with its practical applications.

The Robotics: Aerial Robotics Training Course is taught by Prof. Vijay Kumar, Professor of Mechanical Engineering and Applied Mechanics of the University of Pennsylvania. The course would require learners to have some mathematics knowledge in linear algebra, single variable calculus, and differential equations along with basic programming experience with MATLAB or Octave.

A branch of mechanical engineering called mechanics of materials uses numerical simulations to study deformable solids. The property of an element to withstand actions and forces exerted without breaking, lasting deformation, or acquiring degradation is referred to as resistance. Mechanics of Materials IV: Deflections, Buckling, Combined Loading & Failure Theories certification course is designed by the Georgia Institute of Technology and taught by Dr. Wayne Whiteman - PE & Senior Academic Professional, which is made available through Coursera.

Mechanics of Materials IV: Deflections, Buckling, Combined Loading & Failure Theories online classes provides 8 hours of comprehensive lectures that aims to assist the participants in exploring the analysis and design of engineering structures taking into account the factors of combined loading, deflection, buckling, and failure theories. With Mechanics of Materials IV: Deflections, Buckling, Combined Loading & Failure Theories online course, participants will be taught about basic and advanced concepts like differential equations, double integration method, superposition, and singularity functions to study beam structure and mechanics of materials including loading, deflection, buckling, failure and more.

An understanding of structural dynamics is crucial in civil engineering when designing new structures or retrofitting older ones to withstand extreme dynamic loading from earthquakes, hurricanes, and strong winds. It is also crucial when determining the emergence and placement of damage within an existing framework. Foundation of Structural Dynamics certification course is designed by ISAE-SUPAERO - an educational platform that provides courses in aerospace engineering and taught by Yves Gourinat - Professor of Physics of Structures & Biodynamics, which is presented by Coursera. 

Foundation of Structural Dynamics online classes offers 6 hours of digital lessons that are designed to provide students with a thorough understanding of fundamental dynamics and prepare them for potential direct and indirect applications in structural dynamics. With Foundation of Structural Dynamics online training, students will gain a better understanding of the fundamental theorems of structural dynamics and their implications for complicated systems as well as will be taught about concepts involved with digital modeling, kinematics, dynamics, conservations, and more.

Introduction to Engineering and Design online certification is created by BrownUniversity and taught by Karen Haberstroh - Lecturer, School of Engineering & Associate Director of Engineering Programs, School of Professional Studies at Brown University, which is offered by edX which is aimed at candidates who want to learn the fundamentals of engineering and discover the engineering design approaches, from concept generation and optimized choice assessment,

Introduction to Engineering and Design online training incorporates 9 hours of comprehensive lectures, which is a great approach for candidates looking to enhance their technical knowledge and apply engineering and design principles to their current employment. Introduction to Engineering and Design online classes also concentrate on specific engineering fields such as biomedical engineering, chemical engineering, civil engineering, electrical engineering, mechanical engineering, and material engineering as well as provide insight into specific design difficulties within their respective engineering disciplines.

Drones for Agriculture: Prepare and Design Your Drone (UAV) Mission certification course is created by WageningenX and taught by Dr Ir. Lammert Kooistra - Associate Professor in Geo-Information Science & Remote Sensing at Wageningen University & Research and Dr João Valente - Assistant Professor in UAVs, Robotics & AI at the Information Technology Group Wageningen University & Research at Wageningen University & Research, which is presented by edX.

Drones for Agriculture: Prepare and Design Your Drone (UAV) Mission online course is intended for agricultural professionals, multidisciplinary technical investigators, and learners who want to master how to utilize a small, commercially available drone to capture high-resolution images of agricultural fields. With Drones for Agriculture: Prepare and Design Your Drone (UAV) Mission online training, learners will also be taught about topics like several drone laws, flight planning, mission planning, data collection, and data visualization as well as will be produced with an understanding of the aerial mapping and how to implement it in a programmable small drone. EdX provides two varied options to enrol in the self-paced programme; verified and audit-free. In the verified mode, the students can access the course materials for an unlimited duration and in the free mode, they can audit it only for a limited period. 

The Introduction to Systems Engineering Certification Course is a 100% online course available on the Coursera platform that discusses the fundamentals of systems engineering. The course will explore different components of a system and examine its design and production process.

Through the Introduction to Systems Engineering Online Course, learners will be able to identify the process behind the development and management of complex systems. The course will be instructed by Dr. Mike Ryan and Dr. Ian Faulconbridge, professors of the School of Engineering and IT at The University of New South Wales, Sydney, Australia.

After completing the Introduction to Systems Engineering Live Course through video lectures, reading materials, practice exercises, and quizzes, learners will be rewarded with a certificate of completion. The course deadlines can be set according to the schedule of the learner.

The African Cities: An Introduction to urban planning course by Coursera explains the brief about the urban planning in African cities through environmental, social, economical and technical dimensions. It talks about the development which could be brought to create a change. 

Development is needed everywhere and it's also something to be learned carefully. One can access this knowledge easily at their convenience. This course helps the learners to gather all the necessary information needed for their careers in this field ahead. 

Under this course, practical knowledge is provided for better understanding as well. This course is great for learners interested in the urbanization field. They could easily acquire all the knowledge they require. Africa is one of the countries that have new business ideas coming up. Setting developments can lead up to huge success over there. 

VLSI chip is a modern and complex chip that is often called a remarkable beast. It packs a billion transistors, logic gates employed in millions to compute and control, huge memory blocks, a third party worked, pre-designed functions that come in blocks (IP blocks or Intellectual Property blocks) embedded in the chip. How can you actually design this chip? The sequence of CAD tools that use abstract descriptions provided for the chip which are refined meticulously in steps to come up with a final design. 

This course is a second part of the VLSI CAD course called the certification course on VLSI CAD Part II: Layout. The course focuses on the important tools that are used for designing and creating an ASIC (Application Specific Integrated Circuit) or an SoC design process (System of Chip). The main target of this course is to help candidates develop an understanding and better knowledge of the key geometrical and logical representations that make it feasible to map from the logic part to layout and particularly to route, place, to evaluate the perfect timing of the large logic networks. 

The VLSI CAD Part II: Layout certificate programme goal is that candidates should be able to utilize and understand the working of tools right at the basic level of its fundamental logic and algorithms and the supporting data structures. The Course is well-curated to include ASIC routing and placement, technology mapping, Analysis of timing involved, etc

The ‘Robotics: Estimation and Learning’ online course is a study about robots with the techniques and strategies involved in determining the surrounding factors during flight and movement. This online program is part of the Robotics specialization of the mechanical engineering domain that is under the physical science and engineering courses. This Robotics course is provided by the online educational platform Coursera and the curriculum is offered by the University of Pennsylvania. This self-paced learning course training is framed to be completed in fifteen hours. 

The course instructor for this online training is Daniel Lee from the Electrical and Systems Engineering department. The students are ensured with the flexibility in deadlines and subtitles offered in languages such as English, Spanish, and Chinese along with the videos and other exercises that add up to an experiential learning process. The ‘Robotics: Estimation and Learning’ by Coursera enables the candidates of the program to receive a shareable certificate for recognition after completion of the course study.

The Robotics: Computational Motion Planning Certification Course is a 100% online course that explores the nuances of robotics including its working mechanism, control systems and motion planning. The course available on the Coursera learning platform has a flexible pattern that allows learners to reset deadlines.

Through the Robotics: Computational Motion Planning Online Course, learners will be introduced to topics like automated planning and scheduling in the field of robotics engineering. The course will be instructed by CJ Taylor, Professor of Computer and Information Science at The University of Pennsylvania.

After completing the Robotics: Computational Motion Planning Live Course, learners will receive a certificate of completion. The course is the second one out of six course constituting the Robotics Specialization Programme.

The Robotics: Mobility Certification Course is a 100% online course that explores the specifications of robotic mobility through the study of robotic motors and sensors. The course available on the Coursera platform is the third out of six in the Robotics Specialization programme. 

Through the Robotics: Mobility Training Course, learners will be introduced to the complex process of robotics design, robotics mobility, and kinematics. They will be instructed by Daniel E. Koditschek, Professor of Electrical and Systems Engineering at The University of Pennsylvania.

After completing the Robotics: Mobility Live Course through expert video lectures, informative readings, graded assignments, quizzes, and exams, learners will receive a certificate of completion. The flexible structure of the course will allow learners to reset the deadlines according to their preferences.

Robots can resemble humans, but are not needed to, and are capable of adopting any appearance and performing any number of tasks. They can be programmed by humans or computers, but they can also have their own Artificial Intelligence software routines that allow them to take in and analyze information and make decisions as if they were living creatures. Some are even capable of learning on their own using machine learning. Building a Future with Robots certification course is developed by the University of Sheffield, will be taught by Sandor Veres, and is delivered by FutureLearn.

Building a Future with Robots online training comprises more than three weeks of comprehensive learning resources and unlimited access to the course for those who want to develop various understandings about how robots will affect many facets of human life in the future, and analyze present and future revelations in the discipline of robotics.  Building a Future with Robots online classes cover topics such as the impact of how robots sense their environment, how robotics is inspired by nature, and how robots will interact with people. Candidates will obtain an understanding of the fundamental challenges of robotic design and illustrate how research is being conducted to address these obstacles and more.

The Particle Dynamics Course covers concepts of particle dynamics, which is one of the most fundamental subjects covered under Mechanical Engineering. You will be able to organize your knowledge about various concepts such as force, motion, work, energy, impulse, and momentum, among others. Newton's 2nd Law of motion and its integration over time and displacement are also part of the curriculum. 

The Coursera Particle Dynamics Online Programme is the first of the two-part Engineering Dynamics module, the second part being Rigid Body Dynamics. It consists of pre-recorded video lectures that are each about 15 minutes long. These video lectures include problem-solving exercises. 

The Particle Dynamics Course is an intermediate-level programme offered by the KAIST ( Korea Advanced Institute of Science and Technology ). You will require approximately 14 hours to complete this course. Besides, you also have to appear for a final exam. You can also purchase a certification experience of the course. This certificate will add tremendous value to your resume.

The Introduction to Engineering Mechanics Certification Course is a 100% online course on engineering mechanics available on the Coursera online learning platform. The course will deal with applications of basic mathematics and physics along with applications of real-world engineering concepts.

The Introduction to Engineering Mechanics Training Course has flexible deadlines that allow learners to reset deadlines and progress at their own pace. Dr. Wayne Whiteman, an academic professional at the Woodruff School of Mechanical Engineering, Georgia Institute of Technology.

After completion of the Introduction to Engineering Mechanics Live Course through video lectures, reading materials, practice exercises, and graded assignments, learners will receive a course certificate of completion.

The Application in Engineering Mechanics Online Course is a specialized course provided on the Coursera platform dealing with the applications of the concepts in engineering mechanics. The learners of this certificate course should have knowledge of the course contents in “Introduction to Engineering Mechanics” in order to understand this course. The course is available in a flexible mode that allows learners to choose their preferred schedule.

The Applications in Engineering Mechanics Training is instructed by Wayne Whiteman, PE, a Senior Academic Professional at the Woodruff School of Mechanical Engineering. After completing all course content through videos, reading materials, and practice quizzes, learners will be assessed. The Applications in Engineering Mechanics Certification by Coursera will be provided to learners who complete the course successfully.

The Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading Certification Course is a 100% online course that discusses the mechanics of materials with a special focus on solid objects that are subjected to stress. The course is available on the Coursera platform and is instructed by Wayne Whiteman, a senior academic professional in the Woodruff School of Mechanical Engineering. 

The Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading Training will be provided in a flexible manner wherein the candidates reset deadlines according to their preference. Once the course lessons are completed and the assessments are fulfilled, learners will get the Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading Certification by Coursera.

The word nanotechnology refers to all those branches of science and engineering where components, structures, sensors, and processes are designed, characterized, produced, and used under phenomena occurring at dimensions in the nanometer range. Nanotechnology and Nanosensors, Part1 online certification is developed by Technion - Israel Institute of Technology and taught by Prof. Hossam Haick - Head of the Laboratory for Nanomaterial-Based Devices, which is made available through Coursera.

Nanotechnology and Nanosensors, Part1 online course offers 11 hours of digital lessons that help candidates develop the skills necessary to apply what they know about nanotechnology and nanosensors to a subject that fascinates them. Nanotechnology and Nanosensors, Part1 online classes explains the basic concepts and techniques associated with the fabrication, characterization, and manipulation of nanostructures, nanosensors, nanodevices, nanoparticles, and more.