Online Engineering And Architecture Courses & Certifications

The ‘Linear Systems Theory’ online course is a study about linear systems and control associated concepts in control engineering. This course is a National Program for Technology Enhanced Learning free online program provided on the Swayam education portal. The course curriculum is developed and offered by the Indian Institute of Technology Madras.

The online program is scheduled for twelve weeks and is an elective course for undergraduate and postgraduate level students. This course which is a part of the electrical, electronics, and communication engineering along with control and instrumentation domain is a faculty development program that is approved by the All India Council for Technical Education.

The course educator for this online certification course is Prof Ramkrishna Pasumarthy from the department of electrical engineering at IIT Madras. The ‘Linear Systems Theory’ training program will allow students to gain three credits and an e-verifiable course completion certificate after completing the course.

The ‘Principles and Techniques of Modern Radar Systems’ is a study about the multisystem of radars in electronics engineering. The radar system principles program is a National Program for Technology Enhanced Learning Program that provides free online training to the students pursuing their undergraduate and postgraduate levels in electrical engineering, electronics and communication engineering, or communications and signal processing, on the Swayam education platform.

This elective course is offered by the Indian Institute of Technology Kharagpur for twelve weeks by the course instructor, Dr. Amitabha Bhattacharya, an associate professor from the department of electrical, electronics, and communication engineering at IIT Kharagpur.

The ‘Principles and Techniques of Modern Radar Systems’ online training program is approved by the All Indian Council of Technical Education and allows the students to gain three credits after completion of this course. The candidates of this faculty development program can avail of the certificate which is e-verifiable containing the logos of NPTEL and IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ online course is about the functioning and principles of various kinds of electro-mechanical instruments. This is a National Program for Technology Enhanced Learning online course by the online education platform Swayam. The online course is developed and organized by the Indian Institute of Technology Kharagpur.

This NPTEL free online course is conducted for twelve weeks and is a core course for the students of undergraduate level. It is categorized under the domain of electrical, electronics, and communication engineering, control, and instrumentation along with power systems and power electronics. The course instructor for the All India Council for Technical Education (AICTE) approved online program is Dr. Avishek Chatterjee from IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ training program enables the students to gain three credit points and provides the eligible students with an e-certificate with the logos of NPTEL and IIT Kharagpur after course completion.

The Network(RAN) Performance & Optimization Training Course is a 12 week long course that focuses on the concepts of LTE network design and LTE optimization. The course offered on the Skill-Lync platform provides a detailed understanding of different LTE KPIs and throughput KPIs.

The Network(RAN) Performance & Optimization Live Course is delivered with the help of video lectures and informative course content. The course makes use of technical projects and industry-relevant cases of Network (RAN) Performance and Optimization.

After successfully completing the Network(RAN) Performance & Optimization Certification Course, all learners will be rewarded with a course certificate and the top 5% will be granted a merit certification.

The Developing IoT Applications Online Course is a 12 week long course that provides specialized knowledge on Internet of Things (IoT) applications. The course provided on the Skill-Lync platform discusses the basic building blocks of IoT and the different technologies employed in IoT.

Through the Developing IoT Applications Training Course, learners will get a platform to develop end-to-end applications using IoT in various engineering domains. Through video lectures and technical projects, learners will be introduced to theoretical and practical applications of IoT.

After completion of the Developing IoT Applications Certification Course, learners will receive a certificate of completion and the top 5% of a class will get a merit certificate. There is a one-on-one course demonstration available for the course.

The study of networks here in Communication Networks Certification calls for an understanding of network topologies, protocols, or algorithms that handle various information-exchange tasks or subtasks as well as tools for network design and performance analysis.

The properties and structure of communication networks are covered in detail in Communication Networks Classes to enable the back-and-forth movement of a physical entity, any network containing nodes and branches in any data communication and computer networks. 

All students get a Communication Networks Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Signal Processing Techniques And Its Applications Certification is that the information that they contain can be displayed, analyzed, or converted to another type of signal that is useful. In the practical world, analog products detect signals such as sound, light, temperature, or pressure and manipulate them accordingly to their usage.

Signal Processing Techniques And Its Applications Classes teach about the modern applications that have penetrated a wide range of systems, such as consumer electronics, digital communications, medical imaging, and so on.

All students get a Signal Processing Techniques And Its Applications Certification from the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam Initiative by the Government of India. 

Principles of Communication Systems - I Certification begins with various basic tools such as Fourier Series/Transform,  along with other significant modulation techniques like such as Amplitude Modulation, Frequency Modulation, Phase Modulation etc. Sampling process and Quatization, including Nyquist criterion and reconstruction of the original signal from the sampled signal will be dealt with in the later parts of the course.

Principles of Communication Systems - I Classes are intended to serve as a foundational course for introducing the students to various dimensions of probability from the perspective of contemporary digital and wireless communications. It includes ideas in probability and random variables/processes.

All students get a Principles of Communication Systems - I Certification from the Indian Institute of Technology Kanpur (IIT Kanpur) under the Swayam Initiative by the Government of India. 

The primary purpose of Analog Electronic Circuits Certification is to serve as a foundational course for undergraduates and as a refresher course for graduate students and circuit designers employed in the industry.

It strikes the ideal mix between theory and practice in Analog Electronic Circuits Classes so that the studied circuits can be built in a laboratory course for undergraduates and their measured performance can be easily compared to the theoretically expected performance. It boosts theoretical confidence. 

All students get an Analog Electronic Circuits Certification by the Indian Institute of Technology Kharagpur (IIT Kharagpur) under the Swayam initiative by the Government of India.

An in-depth comprehension of sampling, reconstruction, and sample rate conversion using multi-rate building blocks is part of the Multirate DSP Certification. Multiple sampling rates are referred to as multi-rate and are used by a multi-rate DSP system inside the specified system. 

Multirate DSP Classes will be giving a brief outline of the course and also an introduction to the elements of the course as it has a lot of very practical and intuitive applications and will be very helpful in understanding why multi-rate signal processing is beneficial to us.

All students get a Multirate DSP Certification from the Indian Institute of Technology Madras (IIT Madras) under the Swayam Initiative by the Government of India. 

Circuit Analysis for Analog Designers Certification program is designed to cover the circuit analysis areas that a working analog designer needs to know. Aspiring analog designers are introduced to more complex concepts including inter-reciprocal networks, analog filters, and circuit noise analysis.

Transmission lines, distributed circuits, and the analysis of circuits with modest nonlinearities are all covered in detail in the Circuit Analysis for Analog Designers classes. 

All students get a Circuit Analysis for Analog Designers Certification from the Indian Institute of Technology Madras (IIT Madras) under the Swayam Initiative by the Government of India. 

Operation and Planning of Power Distribution Systems Certification provides a general overview of modern power distribution systems commencing with explanations of various power distribution system components and configurations, load models, various reliability evaluation methods, and various power distribution planning approaches.

Operation and Planning of Power Distribution Systems Classes will give an overview of the historical development of the electrical power system and especially the Indian power system - how it evolves centuries ago and how it is in its present shape.

All students get an Operation and Planning of Power Distribution Systems Certification from the Indian Institute of Technology Guwahati (IIT Guwahati) under the Swayam Initiative by the Government of India.

Design and Analysis of VLSI Subsystems Certification introduces students enrolled in this course to a detailed introduction to the topics of designing Digital CMOS VLSI subsystems utilizing delay, power, and area design metrics.

More emphasis is placed on power estimation, interconnect-aware designs, and discussions of a few power-benefitting designs in the Design and Analysis of VLSI Subsystems Classes.

All students get a Design and Analysis of VLSI Subsystems Certification by International Institute of Information Technology Bangalore (IIIT Bangalore) under the Swayam Initiative by the Government of India. 

Physics of Nanoscale Devices Certification will introduce students to the basic physics of novel miniaturized i.e mesoscopic and nanoscopic devices.

Physics of Nanoscale Devices Classes would start from the basics of quantum mechanics and equip the students to delve into advanced topics in nanoscale devices. Devices that were thought to be beyond the reach of engineers can now be fabricated in new ways. The crucial factor has been the development of newer techniques by which extremely narrow rods, or nanowires, of a semiconductor can be formed. 

All students get a Physics of Nanoscale Devices Certification by Indian Institute of Technology Roorkee (IIT Roorkee) under the Swayam Initiative by Government of India.

The online course on Biophotonics by Swayam introduces the rudimentary concepts of photonics and biology along with the discipline of medicine. The Biophotonics certification syllabus for a period of twelve months will be covering the following topics- basics of biology, light-matter interactions, biophotonics, biosensors, light activate therapy and other topics related to the domain. For the course, students from a multi-discipline can join. Candidates from electronics, biological sciences, bioengineering, communication engineering, and others can apply for the Biophotonics online course and have their existing skills developed. 

The course will be held over digital platforms. The applicants further can register for the course for free but for getting the certificate they can choose to apply for the exam. For the benefit of the participating candidates, the course type has been structured as an elective. The program will thus help the students to learn about the basics of light-matter interactions.

The online certification program on VLSI Physical Design by Swayam will be introducing the appearing candidates with the fundamentals and the principles that are involved in the basic design flaw in the VLSI physical design automation. The VLSI Physical Design training will also be covering the basic data structural designs and the algorithms used for implementing the designs in the solution statements. 

In the VLSI Physical Design certification syllabus, the candidates will be provided with- assignments and examples that will be helping them to comprehensively understand the primary concepts that are involved in the VLSI physical design.   

Over the course of twelve weeks, the concepts that will be involved are - Grid routing and global routing, Interconnect modeling and layout compaction, Detailed routing and clock design, Physical synthesis and performance-driven design flow, Clock routing, and power/ground, Static timing analysis, and timing closure. The program will thus help them to develop the students existing skills in digital circuits.

The study of the 8085 architecture, functional diagram specifics, instruction kinds with straightforward programming, addressing modes, memory interface, and timing diagram is provided by Digital Electronics and Microprocessor Certification, interacting with auxiliary hardware like the 8155 and 8255.

Digital Electronics and Microprocessor Classes introduces the students to the fascinating world of microprocessors and its integrated circuit parts, their programmability for a certain application, etc. 

The 8085 microprocessor family is covered in depth in the Digital Electronics and Microprocessor Certification Syllabus, and you will also be introduced to additional cutting-edge microprocessor families. 

All students get a Digital Electronics and Microprocessor Certification by College of Engineering, Anna University, Chennai under the Swayam Initiative by the Government of India. 

Engineering undergraduate first-year students from all disciplines are primarily eligible for The Principle of Electrical Sciences Certification. Nearly every aspect of fundamental electrical engineering is covered in the Principle of Electrical Sciences Classes, from electrical machines and transformers to DC and AC circuits.

Principle of Electrical Sciences Certification Syllabus will acquaint you with certain basic ideas, terminologies, and methods related to the steady state analysis of electrical circuits generated by sinusoidal or d.c. sources.

All students get a Principle of Electrical Sciences Certification by Indira Gandhi National Open University (IGNOU) under the Swayam Initiative by the Government of India. 

The edX Solar Energy online course explains the basics of photovoltaic aspects, solar energy, and conduction physics. Through this course, learners can design solar cells and understand the optics needed to do so. Spread over 12 weeks, the course is set at an advanced level and covers engineering subjects.

The Solar Energy: Photovoltaic (PV) Energy Conversion course is taught by professors from the  Delft University of Technology or TU Delft. The programme requires an effort of at least ten hours each week to complete it successfully. Learners can access the course materials with limited tests and discussions to augment their learning process. 

Moreover, by paying a fee to receive a verified certificate, students also receive tools for experimentation and have unlimited access to materials and graded tests. The video transcripts are scheduled for the Solar Energy: Photovoltaic (PV) Energy Conversion course by edX and are in English. Corporate packages are also available for enterprises. The course provides two enrollment modes; paid and free. In the paid mode, the candidates will have unlimited access to the course and a certificate of completion whereas in the free audit mode, they will be given access only for a limited period. 

The Engineering Econometrics certification course is an elective course under the management studies category at IIT Kharagpur. This course is offered at both the undergraduate and postgraduate levels for students of management, engineering, or multidisciplinary subjects. And Prof Rudra P Pradhan instructs this online course. 

The Engineering Econometrics training syllabus will explore data modelling, spreadsheet, and analysis required to make significant business analytics decisions. This is quantitative training that will discuss problems related to business/management. Moreover, to enhance the students' decision-making and problem-solving skills, the course uses real-life cases and problem sets.  

Students can audit the Engineering Econometrics programme by Swayam for free if they meet the essential prerequisites. However, those who want to receive the course certificate on completion must complete all 12 in-course assignments and the end-term proctored exam. The cumulative passing score of the assignments and exam will determine the eligibility for the e-certificate.

The Engineering Mathematics II online course is a 12-week course and the second part of Engineering Mathematics training. This programme is an undergraduate-level core course, and a  part of the mathematics category, offered by IIT Kharagpur. The course will be instructed in English by Prof Jitendra Kumar.

The Engineering Mathematics II certification syllabus deals with the essential and fundamental aspects of mathematics required for undergraduate science or engineering studies. Some of the topics covered under the course in the first eight weeks are vector calculus, numerical and complex analysis, and Laplace Transform methods applied to several engineering-related problems. 

Towards the end, the last four weeks of the Engineering Mathematics II training deals with module five, including in-depth information about the Fourier Series Representation and Transform.  The course also has many reference materials to help the candidates do their research. Candidates may even register for the exam and receive an e-certificate based on their eligibility.

The Introduction to Environmental Engineering and Science - Fundamental and Sustainability Concepts Certification consists of a 12-week online course. IIT Kharagpur develops and approves the course syllabus, even if Swayam is appointed to teach the course. The Indian Institute of Technology, Kharagpur, and NPTEL are the organisations authorized to issue this course certificate.

The Introduction to Environmental Engineering and Science - Fundamental and Sustainability Concepts Certification course is a 12-week online program. The course syllabus is prepared and verified by IIT Kharagpur even if Swayam is appointed to provide the course. This course certificate is presented by the Indian Institute of Technology, Kharagpur, and NPTEL.

Introduction to Environmental Engineering and Science - Fundamental and Sustainability Concepts training is a part of the multidisciplinary core curriculum. This certification course is taught by Brajesh Kumar Dubey.

This online course's goal is to give a general overview of the environmental challenges that, per the directive of the Hon'ble Supreme Court of India, all of our working professionals should be aware of so that recycling, waste management, public health, and air and water pollution control can be improved.

This course covers the fundamental concepts of ecology, water pollution, water and wastewater quality and treatment, solid and hazardous waste management, soil and noise pollution, sustainability concepts including environmental impact assessment, life cycle assessment, waste minimization, the circular economy, and sustainable development insurance.

The Automotive Class A Surfacing using ALIAS Training by Skill Lync focuses on understanding and learning how to use the ALIAS and design surface of automobiles. The computer-aided industrial design software is in predominant use in automotive design, and industrial design for generating Class A surfaces through NURBS modelling methods and Bezier surfaces.

The Automotive Class A Surfacing using ALIAS Online Course covers the specialised features of the software such as CAID/CAD Design, controlling geometry, NURBS and slab modelling, and surface editing. The curriculum also familiarises you with the different continuities and various forms of concept modelling, technical surfacing, and surface modelling along with reverse engineering.

The Automotive Class A Surfacing using ALIAS Programme is a six-month training which provides intensive knowledge about using ALIAS for automotive class A surfacing via industry-based projects. Skill Lync will assist you with video lectures, in-course assignments, and exercises to help strengthen your understanding. After finishing the programme, you will receive a course completion certificate. Students who complete with good performance among the top 5% of the batch will get a certificate of merit.

The Simulation and Design of Power Converters using MATLAB and Simulink programme by Skill Lync has been specially developed and crafted for professionals who have a keen interest and desire to learn about the designing and operations of power converters. The technology used in this programme is LTSpice, Simulink and MATLAB. The programme is taught from an analytical point of view and approach with both theoretical and practical exposure via real-life case studies. Skill Lync is a programme facilitator who teaches candidates in developing simulation models, analysis of DC/DC Converters and application of Solar Inverters, Data Center Converters, PC Power Supply and others. 

MATLAB/Octave Vehicle dynamics is a study of the mathematical modelling for suspensions, tyres modelling, handling of a vehicle and ride. The final execution of any vehicle depends on several parameters like steering mechanics, steering and swingarm geometries, ride frequency, ride handling, opposing characteristics, and dynamics. Thus, it's important to recognize and improvise these attributes to style a masterpiece automobile.

To calibrate these parameters, we must always understand its importance and crux. This course helps you perceive the ideas and theories, alongside the mathematical modelling concerned within the arena of auto dynamics. You may conjointly learn the initial style section of a vehicle within the business. You’ll be able to put up with this course only if you're fascinated by the sphere of engineering and motorsport engineering, by the sphere of suspension style, ride dynamics, and tyre modelling. BAJA and FSAE sports enthusiasts also can sign up for this course.

 This course is going to be useful in beginning a career within the boundaries of auto dynamics and can conjointly assist you in following an academic degree within the field of motorsport /automotive engineering.

Skill Lync’s SolidWorks Boeing 747 Design training course takes an out-of-box approach to help you master the industry-grade modelling platform, SolidWorks. Unlike traditional classroom learning, the programme is entirely project-based. You will get to design the entire complex structure of a Boeing 747-8 on SolidWorks. 

Learning to use SolidWorks efficiently is an essential skill for mechanical, automotive, and aerospace engineers who are just starting their career as professionals. The SolidWorks Boeing 747 Design programme will provide crucial hands-on experience in complex design modelling. You can embellish your portfolio with professional-level projects. 

The SolidWorks Boeing 747 Design online training offers high-quality video lectures curated and mentored by industry experts. Candidates can get in touch with the course instructors through Whatsapp, email, video call, or telephones. Moreover, Skill Lync’s community forum will be accessible for learners to discuss course-related doubts and queries. Upon satisfactorily completing the training, you will get a course-completion certificate, shareable on LinkedIn. 

The Automotive Lighting Design using CATIA V5 programme has a comprehensive curriculum to help you become familiar with CATIA software and its tools. From CATIA software overview to drawing and doing necessary tooling checks, this course covers essential aspects of design lighting for automobiles. Also, the curriculum will make you acquainted with CATIA tools and increase your knowledge in automotive lighting design.

The Automotive Lighting Design using CATIA V5 course by Skill Lync has an impressive leaderboard, composed of experts in mechanical engineering and design. They provide a splendid learning and project experience to aspiring mechanical, aerospace, and automobile engineers with this all-encompassing design course. 

The Automotive Lighting Design using CATIA V5 course covers CATIA V5 software in-depth. It is a leading CAD (Computer-aided Design) software which is used extensively for product design, analysis, and simulation across aerospace and automotive industries. Furthermore, the certification course will increase your employability in the Research and Development departments and design sectors of various companies. You will also receive a course completion certificate upon satisfactory completion. 

Skill Lync Automotive Sheet Metal Design using NX CAD course is helpful for candidates willing to work with NX software. The curriculum provides a comprehensive understanding of theoretical and physical design factors used for the creation of first-rate BIW components. The certification course will help learners gain in-depth knowledge of metal sheet designing in automobile engineering.

Moreover, the Automotive Sheet Metal Design using NX CAD online course focuses expansively on the fundamental and advanced theories and concepts of BIW component design. The certification course also covers Modern design technology and the creation of successful contemporary products. 

Apart from the high-quality video lectures, the Automotive Sheet Metal Design using NX CAD programme also provides you with industry-grade projects. These hands-on projects are aimed at strengthening the knowledge garnered from the module and building your strong technical portfolio. Upon successful completion, you will receive a certificate. Apart from this, the top 5% of students in the class will receive a merit certificate.

The Computational Fluid Dynamics online course is a 12 weeks program offered by Swayam, an initiative by the Ministry of Education, Government of India. CFD, or computational fluid dynamics, is a subfield of continuum mechanics concerned with the simulation analysis of heat transfer and fluid flow issues. The Computational Fluid Dynamics training covers analytical solutions to various differential, integral or integro differential models found through mathematical modelling of any continuous issue confined to basic geometries.

Analytical solutions cannot be derived for the majority of cases of practical importance, and a numerical method must be used. Computational Fluid Dynamics syllabus covers the technique of getting approximate numerical solutions using digital computers in the subject of mechanics. Computational Fluid Dynamics refers to the same approach for thermo-fluidic issues. CFD is concerned with providing an approximate analytical solution to the continuity equation focused on the basic conservation laws of momentum, mass and energy.

The Advanced Fluid Mechanics 1: Fundamentals online course allows learners to delve deep into the fundamental principles of fluid mechanics. Students can learn about several of its connections with continuum mechanics like hydrostatics, buoyancy, inviscid flow, rigid body accelerations, and the application of Bernoulli's theorem.

The Advanced Fluid Mechanics 1: Fundamentals certification course is spread over 12 weeks and is instructed by the top instructors from MITx. This instructor-led program has a fixed schedule. It is the first out of the three-course sequence in the incompressible fluid mechanics course. This series enhances students' abilities in the application of equations and analysis of complex models of fluid physics phenomena. 

Furthermore, the Advanced Fluid Mechanics 1: Fundamentals certification syllabus is based on MIT's class 2.25 Advanced Fluid Mechanics 1: Fundamentals, a fairly popular graduate program in MIT's mechanical engineering department. Learners get access to high-quality materials that are incredibly relevant to engineers and scientists from a wide range of chemical, mechanical, and process industries.