Page 2 - List of all Courses & Certifications - Eligibility, Fees, Duration, Career Options

Offered by

IIT Kanpur via Swayam

Certificate

Introduction to Astrophysical Fluids

The Introduction to Astrophysical Fluids program is an elective course under the discipline of Physics. This AICTE approved FDP course will be held for 12 weeks and instructed by Prof Supratik Banerjee. The course is suitable for students pursuing any advanced UG or PG degrees.

The domain discussed in the Introduction to Astrophysical Fluids certification course has been under active research for the past 70 years. Candidates will learn about magnetospheric plasmas and solar wind, and how large interstellar clouds are borne out of the astrophysical fluid expansion. The course thoroughly explains phenomena such as solar flares, sunspots, stellar winds, accretion disks, star formation, supernovae explosions, and much more.

Derived from the IIT Kanpur course, the Introduction to Astrophysical Fluids training explicates astrophysical theories with an analytical, research-oriented, and systematic approach. Candidates will understand these concepts through phenomenological descriptions and by using specific mathematic tools taught throughout the course.

12 Weeks

July 23 - October,12 2023

₹ Free

Compare

Skills Covered:

Knowledge of physics

Offered by

IIT Kanpur via Swayam

Certificate

Introduction to Robotics

The Introduction to Robotics program is developed by IIT Kanpur. It explores the concepts and mathematical calculations that go behind building robotic manipulators. This introductory course lays a foundation in advanced topics such as AI, automation, self-driving vehicles, and much more. Concepts studied include kinematics, VAL programming, automation, trajectory planning, and vectors.

The Introduction to Robotics certification syllabus uses video lectures, book references, a final assessment to facilitate learning. Learners must be familiar with mathematics, differential equations, and matrices- all on a fundamental level. This AICTE approved course is best suited for undergraduate and postgraduate-level electrical, mechanical, and computer students.

Engineering teachers and working professionals may also apply as this elective course is an FDP (Faculty Development Program). Candidates can opt for the Introduction to Robotics certification by securing the minimum marks as mentioned. For this, they need to complete the course, submit assignments, and write the final-term proctored test.

12 Weeks

January 17 - April,08 2021

₹ Free

Compare

Skills Covered:

Automation skills Robotic skills

Offered by

IIT Kanpur via Swayam

Certificate

Microeconomics Theory and Applications

The Microeconomics: Theory & Applications certification course will make students meet the ongoing policies and their respective implementation, the candidate can understand and grab the benefits and consequences of implemented policy in a better effective manner. This is indeed a doctoral tool for teaching economic theory and how these economic actors work within the so-called business social institution, including individuals such as customers and businesses.

This is one of the classes taken by students in their M.S./M.A. 1st-semester coursework in the programme in Economics. For M.Com./M.B.A.-registered students, microeconomics may be the only course they take in economics, and it offers a sound base for the economic theory that may be beneficial in their successful jobs. The Microeconomics: Theory & Applications training will provide an immense structure framework of the economy.

This basic course is intended to provide a framework for applied studies in economics, business, or public policy. That's why several lectures on quantitative methods that are useful in applied work have been offered in this course. The Microeconomics: Theory & Applications certification will be provided in the last. Candidates will be able to use fundamental microeconomic theory and mathematical methods to answer a variety of real-life market and policy problems upon successful completion of this course.

12 Weeks

January 23 - April,14 2022

₹ Free

Compare

Skills Covered:

Knowledge of Economics

Offered by

IIT Kanpur via Swayam

Certificate

Manufacturing Process Technology I & II

The Manufacturing Process Technology I & II online training will introduce learners to the basics of machining processes and their applications in machinery and manufacturing industries. For most manufacturing enterprises, the long-term objective is to stay in business and make profits. So manufacturing industry professionals must always be aware of the dynamic changes taking place in the market environment.

To achieve this, the programme will use examples primarily based on manufacturing industries’ operations. Plenty of assignments are also available for candidates to test their knowledge. The Manufacturing Process Technology I & II course is spread over 12 weeks and is a core mechanical engineering course. This programme has been developed by IIT Kanpur and is delivered by Swayam.

The video lectures are mentored by Prof. Shantanu Bhattacharya, an esteemed professor at IIT Kanpur’s Department of Mechanical engineering. Manufacturing Process Technology I & II programme is catered towards undergraduate or postgraduate students currently a science or engineering degree. Swayam also offers a certificate to students who pass the final test and submit all the assignments.

12 Weeks

Beginner

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam

Certificate

Muffler Acoustics - Application to Automotive Exhaust Noise Control

The Muffler Acoustics - Application To Automotive Exhaust Noise Control certification is an NPTEL course and aims to impart knowledge about the theory of exhaust mufflers used in the field of engineering noise control. The programme is made for undergraduates as well as postgraduates and is offered to the students by IIT, Kanpur. The course includes the fundamentals as well as a detailed explanation of the topics. Candidates who prefer to choose the Muffler Acoustics - Application To Automotive Exhaust Noise Control programme get informed about 3-D acoustic fields, different terminologies, acoustic filters, etc.

Participants will learn about 12 different chapters over a period of 12 weeks. Students are free to consume more time in completing the Muffler Acoustics - Application To Automotive Exhaust Noise Control certification syllabus than the given time. The course is provided in online mode without any payment and requires no particular time to be spared for the course. It is upon the wish of the students to attend the classes or video lectures. The programme also offers certification to the candidates. The certification can be achieved through an exam and registration fees. Students can join the Muffler Acoustics - Application To Automotive Exhaust Noise Control training at any time according to their requirements and pursue the same accordingly as it is a self-paced course.

12 Weeks

January 17 - April,08 2021

₹ Free

Compare

Skills Covered:

Knowledge of sound

Offered by

IIT Kanpur via Swayam

Certificate

Principles of Signals and Systems

The Principles of Signals and Systems training is verified by NPTEL and created by IIT Kanpur with Prof Aditya K. Jagannatham. The 12-week core course has been approved by AICTE and allows credit transfer to the institution you are enrolled in.

The Principles of Signals and Systems online course teaches about the foundation of current communication, digital signal processing, and control systems. Therefore, understanding these primary signal and system analysis principles is vital for ECE, EEE, and IE students. Basic signal and system analysis tools such as LTI systems, Fourier transform, DFT, DTFT, z-Transform, Laplace transform, and much more will be discussed over the course.

You will also become familiar with concepts such as causality, frequency or impulse response, convolution, and systems stability. The Principles of Signals and Systems program is appropriate for practicing engineers, UG or PG students, and managers who want to build a strong understanding of the field.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam

Certificate

Optical Communications

The Optical Communications certification course is a training which is meant for electrical engineering students. Participants who apply for this course get to know about optical communication and its latest developments that took place over the years in the industry. The programme is offered to the students by IIT, Kanpur. The course deals with the basic concepts as well as detailed concepts of the field. The course also includes the study of MATLAB models. The course belongs to the category of communication, electronics, and electrical engineering.

The Optical Communications online course offers its learning at no cost and with full study materials. The programme provides self paced training so that students have enough time to understand the concepts according to their willingness. The course provides a certificate to the students upon the successful completion of the programme if they qualify for the final exam with the given criteria.

Since the course is a self paced course, it can be completed with no time restrictions although the Optical Communications certification syllabus will be finished in 12 weeks by the mentor. Even after the completion of the programme, the notes and other study material will be accessible to the students. The course is absolutely free but the certification exam includes a cost of the quoted amount which needs to be paid as exam fees.

12 Weeks

January 17 - April,08 2021

₹ Free

Compare

Skills Covered:

Knowledge of MATLAB

Offered by

IIT Kanpur via Swayam

Certificate

Product Design and Manufacturing

The rise in innovation, expansions in new technology, better management practices, and throughput inputs have made the Product Design and Manufacturing program a lucrative course for students. A typical cycle of a product from design to manufacturing has a systematic approach, right from the idea generation to the final product. In this course, candidates will be offered a deeper understanding of various concepts in assembly, environment, developmental tools, costing, and manufacturing of new products.

Product Design and Manufacturing certification is the result of a collaboration between NPTEL and IIT Kanpur. The syllabus is designed and taught by professor J. Ramkumar and professor Amardeep Singh from IIT Kanpur. The course is free to audit and will be available online on the Swayam platform.

Product Design and Manufacturing is a twelve-week course that uses assignments and an end-of-term examination to motivate the participants and encourage them to complete the course. The certification is available for students who complete the qualification criteria. The elective training falls under Mechanical Engineering and Product Design sectors.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam

Certificate

Randomized Methods in Complexity

The Randomized Methods in Complexity certification course begins with introducing algorithms and circuits. It includes video lectures and references for students to learn effectively. Post-completion, learners will be able to develop error-correcting codes and pseudo-random generators. This AICTE-approved study is a Faculty Development Program (FDP) for undergraduate/postgraduate-level students.

Through the Randomized Methods in Complexity certification syllabus, students will construct expander graphs and algorithms based on logarithmic – spaces. They’ll learn through randomized algorithm examples and randomized methods for identity testing, providing hardness results for parity problems, and clique. The concepts included in this 12-week study are based on computer science, engineering, and mathematics. Learners can start the next module after completing the previous week’s topics.

This elective Randomized Methods in Complexity program is an IIT Kanpur offering. Professor Nitin Saxena from its CSE Department mentors the study. Candidates must submit one assignment per week during the course and complete all the modules. Additionally, they can register for a proctored exam to acquire the completion certificate by providing its required fees.

12 Weeks

January 17 - April,08 2021

₹ Free

Compare

Skills Covered:

Mathematical skill Knowledge of Algorithms

Offered by

IIT Kanpur via Swayam

Certificate

Turbulent Combustion: Theory and Modelling

The Turbulent Combustion: Theory and Modelling certification course is more comprehensive and analytical in nature. The course will focus on basic knowledge of combustion and is supposed to enhance the architecture of industrial combustion systems by increasing the stability of the flame, enhancing the performance of combustion, and reducing the creation of contaminants.

An integrated understanding of theoretical and numerical aspects of combustion will be discussed in this course, especially in the field of unstable turbulent combustion. The Turbulent Combustion: Theory and Modelling training is provided with each and every module of the certification syllabus. The course will later lead by the debate will continue on fundamental techniques and recent developments in the fields of turbulent combustion, thus maintaining crucial ties with the underlying fundamentals of combustion.

The Turbulent Combustion: Theory and Modelling certification will provide a structural verification that a student has successfully passed the course with effective training that will help the candidate to pursue any further course in the same respective field in the upcoming future. In this particular course, an analytical approach towards each and every module is given that will enhance the learning of the students.

12 Weeks

₹ Free

Compare

Offered by

IIT Kanpur via Swayam

Certificate

Structural Geology

The Structural Geology program is approved by AICTE and offered by IIT Kanpur. It primarily focuses on structural geology fundamentals. The course layout has been specially designed to provide an introductory level understanding of this subject, which belongs to the earth Sciences category.

Knowledge of basic maths and physics will be essential in adequately completing the Structural Geology certification syllabus. Undergraduates interested in learning geology can join the course and understand the subject in detail.

The Structural Geology online course broadly covers concepts of geometry, kinematics/strain, and dynamics/stress in Earth and other planetary bodies. You will learn to use geological time scales to understand how rocks deform over time through weekly lectures by Prof. Santanu Misra of IIT Kanpur.

Moreover, you can take an optional proctored exam to receive the Structural Geology certificate and acknowledge your newly acquired knowledge. This online program also has a free registration process, so you can audit it without paying a fee.

12 Weeks

Beginner

January 17 - April,08 2021

₹ Free

Compare

Skills Covered:

Knowledge of Geology

Offered by

IIT Kanpur via Swayam

Certificate

Animal Physiology

The ‘Animal Physiology’ online course is developed for the students to learn about the structure and functions of the cells and systems in the body. This biological sciences program is for the students to enhance their knowledge of the physiological aspects of the human body. This massive open online course is provided by Swayam and the National Program for Technology Enhanced Learning (NPTEL). This online certification is a core course for the undergraduate and postgraduate level students of the biological sciences and bioengineering which is organized for a period of twelve weeks.

The classes of this course are held online led by the instructor Prof. Mainak Das, faculty at the Indian Institute of Technology Kanpur. The students of this course will gain theoretical and practical insights into human physiology in detail through the videos, lectures, online resources, and are evaluated through a series of weekly assessments and a final exam.

The ‘Animal Physiology’ online certification course enables the participants to get the certification by Swayam and the credit points for this program approved by the All India Council for Technical Education (AICTE).

12 Weeks

July 20 - October,12 2023

₹ Free

Compare

Skills Covered:

Knowledge of Physiology Knowledge of Microbiology Knowledge of anatomy

Offered by

IIT Kanpur via Swayam

Certificate

Conservation Geography

The ‘Conservation Geography’ online certification course is developed for the students to discuss the theories of geography in detail to understand the various aspects of conservation and biodiversity that enable development. This biological sciences and bioengineering program of the National Program for Technology Enhanced Learning(NPTEL) is provided by Swayam online education portal. The course classes are offered free of charge and are scheduled for a period of twelve weeks.

The instructor for this elective course at the undergraduate or postgraduate level is an academic and industrial expert, Dr. Ankur Awadhiya from the Indian Institute of Technology Kanpur. The training consists of a virtual mode of learning enabled by videos, online lectures, and other resources that include working on case studies to understand the conservation intended development.

The ‘Conservation Geography’ online training program ensures the participants of the program with a course certificate and credit points after completing the course successfully according to the qualifying criteria.

12 Weeks

July 23 - October,12 2023

₹ Free

Compare

Skills Covered:

Knowledge of Geography Knowledge of Environmental Science Knowledge of Economics Knowledge of Biology

Offered by

IIT Kanpur via Swayam

Certificate

Advanced Composites

The Advanced Composites certification course from IIT Kanpur is a 12-week online course. This online certification course is designed for those who want to perform experiments in the area of NVH. The Advanced Composites certification by IIT Kanpur will provide students with in-depth insights into the measurement process. This Advanced Composites online course is delivered via Swayam and can be pursued by engineering and science students, and also by those students who are in the industry and research organizations and working in the area of sound, NVH and acoustics.

The Advanced Composites certification syllabus is structured over 12 weeks where each lecture has a quiz helping students with the concepts better. This online course is open to all and requires no particular background, except for openness and the ability to learn and devise new ideas with ease. Upon completion of the Advanced Composites training course, students will be able to explore opportunities in the fields of Aerospace, Automotive, Composites, Railways, Power Generation and the industries addressing issues related to composites.

12 Weeks

January 23 - April,14 2022

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam

Certificate

Arithmetic Circuit Complexity

Arithmetic Circuit Complexity Certification deals with understanding the complexity of multivariate polynomials, where the measure of complexity is the size of the smallest algebraic circuit computing it and this is very similar to a boolean circuit, but now basic operations are additions and multiplications of polynomials.

Arithmetic Circuit Complexity Classes introduces the candidates to the Theoretical Computer Science in general and Arithmetic Complexity Theory in particular and this is to estimate the amount of computational resources — time, space, randomness, etc. — required to solve natural computational problems. It takes as inputs either variables or numbers, and is allowed to either add or multiply two expressions it has already computed.

All students after carrying out the required assignments to get an Arithmetic Circuit Complexity Certificate from the IITK (Indian Institute of Technology Kanpur).

12 Weeks

January 23 - April,14 2022

₹ Free

Compare

Offered by

IIT Kanpur , IIT Jodhpur via Swayam

Certificate

Applied Ergonomics

Applied Ergonomics Certification mainly explores the applied scientific discipline that is concerned with how human beings interact with the systems, equipment, and surroundings while performing tasks and other activities.

Applied Ergonomics Classes include Introduction, Physical, Cognitive, Occupational, and biomechanics aspects, and the syllabus is designed to cover work physiology, the engineering aspect of the product, improvement in cognitive capabilities, and other relevant topics.

Students undertaking the course will be able to correlate their understanding of this subject with their day-to-day activities and will be aware of concepts related to increases in human and system efficiency.

Students after carrying out the final exam get an Applied Ergonomics Certificate from the IITK (Indian Institute of Technology Kanpur) and IITJ (Indian Institute of Technology Jodhpur).

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam

Certificate

Mechanics of Solids

The Mechanics of Solids training lasts for three months as an online program. The course's syllabus was chosen and designed by IIT Kanpur and is offered on the Swayam platform. The organizations that grant the course certificate are IIT and NPTEL.

The mechanics of deformable solid bodies will be introduced in this course. The main goal of the course is to give the students the skills they need to solve mechanical problems, which include performing a static analysis of a component to identify internal actions (forces and moments), calculating stresses, strains, and deformation brought on by internal actions, and comparing those results to accepted standards.

This calls for a command of the industry jargon, the ability to draw free-body diagrams, and an understanding of how materials react to loads. The ability of students to design engineering systems should improve. Prof. Priyanka Gosh explains this online course.

Also Read: Civil Engineering Certification Courses

12 Weeks

₹ Free

Compare

Skills Covered:

Civil Engineering skills

Offered by

IIT Kanpur via Swayam

Certificate

Principles of Communication Systems - I

Principles of Communication Systems - I Certification begins with various basic tools such as Fourier Series/Transform, along with other significant modulation techniques like such as Amplitude Modulation, Frequency Modulation, Phase Modulation etc. Sampling process and Quatization, including Nyquist criterion and reconstruction of the original signal from the sampled signal will be dealt with in the later parts of the course.

Principles of Communication Systems - I Classes are intended to serve as a foundational course for introducing the students to various dimensions of probability from the perspective of contemporary digital and wireless communications. It includes ideas in probability and random variables/processes.

All students get a Principles of Communication Systems - I Certification from the Indian Institute of Technology Kanpur (IIT Kanpur) under the Swayam Initiative by the Government of India.

12 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of engineering

Offered by

IIT Kanpur via Swayam

Certificate

Data Analysis & Decision Making - II

Data Analysis & Decision Making - II Certification will cover utility theory, then the concept of multi-criteria decision making, multi-attribute decision making, utility theory, DEA (Data Envelope Analysis), AHP, ANP, and then the concepts of TOPSIS, Elektra, Mac Beth.

Data Analysis & Decision Making - II Classes include the concepts of different types of metaheuristic techniques, without going into the mathematical details of their algorithms, and solve the problems by giving examples for each of them.

All students get a Data Analysis & Decision Making - II Certification by the Indian Institute of Technology Kanpur (IIT Kanpur) under the Swayam Initiative by the Government of India.

12 Weeks

₹ Free

Compare

Skills Covered:

Decision making skills Data science knowledge

Offered by

IIT Kanpur via Swayam

Certificate

Mechanical Behaviour of Materials (Part – I)

The Mechanical Behavior of Materials (Part-1) Certification course is an 8-week online program. The course syllabus is prepared and authorised by the IIT Kanpur, even if Swayam is hired to deliver the course. The Indian Institute of Technology, Kanpur, and NPTEL are the organisations that grant this course certificate.

Mechanical Behavior of Materials (Part-1) training is a part of the Metallurgy and Material Science & Mining Engineering core curriculum. Shashank Shekhar and Sudhanshu Shekhar Singh are the instructors of this certification course.

This course aims to provide students with a fundamental understanding of materials' ability to withstand a variety of external pressures, such as stresses, environmental factors, and time, and the most important mechanical properties of materials, like tensile strength and yield strength, and their determination through testing methods.

12 Weeks

January 23 - April,14 2022

₹ Free

Compare

Offered by

IIT Kanpur via Swayam

Certificate

Introduction to Japanese Language and Culture II

12 Weeks

July 23 - October,12 2023

Compare

Offered by

IIT Kanpur via Swayam

Certificate

Rapid Manufacturing

With the Rapid Manufacturing certification course, students learn about making products in today's fast-paced manufacturing world. It focuses on creating things that are easy to make and have special abilities. Students from different science and engineering fields explore advanced technologies, like fast prototyping and smart design, with hands-on practice.

The Rapid Manufacturing certification by Swayam is 12 weeks long, and by the end, students should know how to make any model. It is open to students who have completed two semesters in their science or engineering program, making it a practical and valuable experience for those interested in making things.

12 Weeks

Beginner

July 23 - October,12 2023

₹ Free

Compare

Offered by

IIT Kanpur via Swayam

Certificate

Social Innovation In Industry 4.0

The Social Innovation in Industry 4.0 certification course delves into Social Innovation, exploring the generation and implementation of transformative ideas and practices to benefit society. It navigates the landscape of Industry 4.0, emphasizing the urgent need for innovators to apply Social Innovation concepts, fostering positive change in tandem with technological advancements.

The Social Innovation In Industry 4.0 certification by Swayam equips students with frameworks, methods, and tools to maximize financial gains and enhance societal well-being. Supported by industry giants like HAL, NAL, SAIL, and ISRO, it bridges theoretical knowledge with real-world applications, preparing students to thrive in the evolving socio-economic sphere.

12 Weeks

Beginner

July 23 - October,12 2023

₹ Free

Compare

Offered by

IIT Kanpur via Swayam +1

Certificate

Production Technology: Theory And Practice

The Production Technology: Theory And Practice certification course offers a comprehensive exploration of manufacturing processes in five modules, covering materials, conventional and non-traditional machining, computer numerical controls, and metrology. With 10 hours of hands-on labs, it caters to UG and PG engineering students, as well as practicing engineers.

The Production Technology: Theory And Practice certification by Swayam encompasses crucial aspects of manufacturing, offering students a well-rounded understanding of materials, machining processes, CNC, and metrology. The course integrates hands-on labs and garners industry support from machine tools and automobile manufacturing sectors, ensuring its relevance and applicability in real-world engineering scenarios.

12 Weeks

July 23 - October,12 2023

Compare

Offered by

IIT Kanpur via Swayam +1

Certificate

Scientific Computing Using Python

The Scientific Computing Using Python certification course delves into essential computational methods vital for Science and Engineering postgraduates. Focused on Python programming, it covers interpolation, integration, differentiation, ODE and PDE solvers, basic linear algebra, and Monte Carlo techniques. With a 12-week duration, it empowers students for diverse applications in various industries.

Tailored for advanced undergraduates and postgraduates in Physics, Mathematics, Mechanical, Aerospace, Computer Science, and Chemical Engineering, the Scientific Computing Using Python certification by Swayam mandates a foundational grasp of calculus, linear algebra, and differential equations. It equips learners with indispensable tools for computational challenges in scientific and engineering domains.

Also Read: Online Python Certification Courses

12 Weeks

July 23 - October,12 2023

Compare

Offered by

IIT Kanpur via NPTEL

Certificate

Data Analysis and Decision Making III

12 Weeks

Compare

Offered by

IIT Kanpur via NPTEL

Certificate

Artificial Intelligence for Investments

12 Weeks

Compare

Offered by

IIT Kanpur via NPTEL

Certificate

Advanced Financial Instruments for Sustainable Business and Decentralized Markets

12 Weeks

Compare

Offered by

IIT Kanpur via Swayam

Certificate

Earth Sciences for Civil Engineering (Hindi)

Swayam's Earth Sciences for Civil Engineering course is a civil engineering course that gives the learners a better understanding of the Earth's interiors, earth system, and its process. The latter part of the course deals with the geological hazards and environmental impact, as well as active faults, and their related risk in our country.

Earth Sciences For Civil Engineering online course takes only eight weeks to complete, and it is intended for postgraduate students of Science and Engineering (especially Earth Sciences), as well as advanced undergraduate students. In this course, the students get introduced to concepts such as seismology and focus on the internal structure of the Earth.

Moreover, the Earth Sciences For Civil Engineering course has a comprehensive curriculum that covers essential topics such as fluvial geomorphology and groundwater, landslide and flood hazard, tsunami, and management of risks. This core course has been extensively designed to teach the candidates fundamentals of geosciences, various geological hazards, and civil engineering applications of the same.

8 Weeks

₹ Free

Compare

Skills Covered:

Knowledge of Geology Civil Engineering skills

Offered by

IIT Kanpur via Swayam

Certificate

Calculus Of One Real Variable

The Calculus of One Real Variable programme is an undergraduate level training. Swayam offers 40 lectures divided into a course plan of eight weeks. The curriculum aims to familiarise students with the elementary and advanced aspects of the calculus of a single variable. Candidates will find several applications of this knowledge in engineering, economics, and science domain.

The Calculus of One Real Variable online programme provides all-encompassing learning content about functions like continuous functions, inverse functions, transcendental functions, and limits and derivatives of a function. Students will also master the intermediate value theorem, Rolle’s Theorem, Lagrange’s mean value theorem, and maximum value theorem. Swayam also allows students to avail of the course free of cost.

Furthermore, Joydeep Dutta, who is presently a professor of Economics at IIT Kanpur’s Department of Humanities and Social Sciences, will teach you the course. Students from engineering, mathematics, economics, and science streams will benefit from the Calculus of One Real Variable certification training.

8 Weeks

July 23 - September,14 2023

₹ Free

Compare

Skills Covered:

Mathematical skill

Exams

Colleges

Predictors

Resources

Quick links

Exams

Colleges & Courses

Predictors

Resources

Exams

Colleges

Predictors & E-Books

Resources

Engineering Preparation

Medical Preparation

Online Courses

Products

Exams

Colleges

Resources

Exams

Colleges

Predictors & Articles

Resources

Exams

Colleges

Predictors

Resources

Exams

Colleges

Upcoming Events

Resources

Exams

Colleges

Resources

Quick Links

Top Streams

Specializations

Resources

Top Providers

Exams

Colleges

Resources

Diploma Colleges

Exams

Colleges

Resources

Exams

Resources

Top Courses & Careers

Colleges

Exams

Upcoming Events

Resources

Other Exams

Exams

Colleges

Top Countries

Student Visas

Exams

Ranking

Products & Resources

NCERT Solutions

List of Online Courses and Certifications

Credential

Course Type

By Date

Program level

Provider

Duration

mode of Study

Course Fee

Pricing

Payment Options

Course Level

Certificate availability

Financial AID

Language

Which credential are you looking for?

Articles