List of Online Courses and Certifications

The Introduction to interfacial waves online course is a study about the wider aspect of vibrations and oscillations along with the specific focus on the challenges in hydrodynamic stability. This National Program for Technology Enhanced Learning(NPTEL) online course is developed and offered by the Indian Institute of Technology(IIT) Bombay for students pursuing chemical engineering and mechanical engineering as an elective course.

The course instruction is conducted for twelve weeks and the course educator for this faculty development program is Dr. Ratul Dasgupta, an associate professor from the department of chemical engineering at IIT Bombay.

The students of this online training program are provided with three credit points and a course certificate. The course certificate consists of the logos of NPTEL and IIT Bombay adding more value to it. The online course on introduction to interfacial waves is provided on the Swayam education platform and is a postgraduate level program.

The Integrated Photonic Devices and Circuits training program is offered by the Indian Institute of Technology Madras and is a National Program for Technology Enhanced Learning online free course. The online course is a faculty development program approved by the All India Council for Technical Education and is provided on the online free education portal, Swayam which is an initiative of the ministry of education in India.

This elective course is conducted for twelve weeks by students of engineering by Prof Bijoy Krishna Das faculty of the department of electrical engineering in IIT Madras. The course provides three credit points to the students after completing the course successfully. The undergraduate and postgraduate level program enables students to gain a theoretical and practical learning experience of the ideas and aspects of integrated photonics devices and circuits. The students are issued with the course completion certificate with the logos of NPTEL and IIT Madras which explains the acknowledgment.

The ‘Stochastic Modeling and the Theory of Queues’ training is a National Program for Technology Enhanced Learning online course offered by the Indian Institute of Technology Madras on the Swayam online education portal. This online program is provided for free as an elective course for the students of postgraduate level and research scholars.

The online course on stochastic modeling and queuing theory is scheduled for a period of twelve weeks and the course study is led by Prof Krishna Jagannathan, an assistant professor in the department of electrical engineering at IIT Madras.

The students of this course will get an opportunity to discuss detailed concepts and principles associated with the domain of electrical, electronics, and communication engineering and communication and signal processing. The learners will gain three credit points after completing this ‘Stochastic Modeling and the Theory of Queue program and a course completion certificate which consists of the logos of NPTEL and IIT Madras. 

The ‘Upstream LNG Technology’ training program is a National Program for Technology Enhanced Learning online free course developed by the Indian Institute of Technology Kharagpur. The informative course is provided on the Swayam online education platform for the students of undergraduate and postgraduate levels.

The online training is scheduled for twelve weeks and the course study is guided by Prof Pavitra Sandilya from the cryogenic engineering center in IIT Kharagpur assisted by two other research scholars. This faculty development program is approved by the All India Council for Technical Education and is part of the chemical engineering and physics category. The participants of this online program will gain three credit points and a course completion certificate after completing the course and clearing the exam with the required mandates. The course certificate of the ‘Upstream LNG Technology’ online course consists of the NPTEL and IIT Kharagpur’s logos which makes the certificates more significant and authorized.

The Technical Textiles is provided on the Swayam online educational platform for the undergraduate and postgraduate students of textile engineering and technology, and material sciences. This National Program for Technology Enhanced Learning free online course is developed by the Indian Institute of Technology Delhi. The course is a study about the details of technicalities associated with the textile industry and to understand the characteristics and functional properties of textile materials and their implementation.

This faculty development program belonging to the field of textile engineering is a core course organized by the IIT Delhi for twelve weeks. The course educator to guide the students through the course is Prof Apurba Das, from the department of textile technology in IIT Delhi. The course is approved by the All India Council for Technical Education and helps the students acquire three-course credits and a course completion certificate that consists of the logos of NPTEL and IIT Delhi representing their recognition of the ‘Technical Textiles’ online training.

The ‘Enclosure design of electronics equipment’ online course is about the process and techniques of product designing of electronic equipment and devices. This program is a National Program for Technology Enhanced Learning(NPTEL) online certification course and is developed and offered on the Swayam online education portal by the Indian Institute of Science (IISC) Banglore. This faculty development program on electronics design is approved by the AICTE and aids in the skill development of the candidates in the field of electrical engineering, and electronics and communication engineering. 

The learners of this course will gain three credit points after completing the course study guided by the IISC faculty, Prof .V.Chalapathi Rao from the department of electronics systems engineering in IISC. The course on ‘Enclosure design of electronics equipment’ by Swayam aids in the discussion of issues in the mechanical aspects of electronic equipment design and prototyping. This online elective NPTEL course is conducted for twelve weeks for undergraduate and postgraduate level students.

The ‘Power system analysis’ course is offered by the Indian Institute of Technology Kharagpur through the Swayam online education portal. It is a National Program for Technology Enhanced Learning(NPTEL) online free course for the students pursuing their bachelor’s or master’s degree in electrical engineering.

The course helps the students gain comprehensive knowledge of per-unit systems and circuit system applications. This faculty development program by IIT Kharagpur is conducted for twelve weeks and is approved by the All India Council for Technical Education. The undergraduate-level course is guided by Dr. Debapriya Das from the department of electrical engineering at IIT Kharagpur. The course which is a part of the Electrical, Electronics and Communications Engineering, and  Power Systems and Power Electronics domains enables students to earn three-course credits. The course certificate received after completion of the ‘Power system analysis’ online training consists of NPTEL and IIT Kharagpur logos that represent its authenticity. 

The ‘Glass in buildings: Design and applications’ online course is provided by the National Program for Technology Enhanced Learning in collaboration with the Glass academy. This online course on the role of glass in building is offered on the Swayam online education platform by the faculty from the Indian Institute of Technology Madras and the Indian Institute of Technology Roorkee. 

The course study is based on the sustainability aspects of glass and its applications. This online program is an elective course for students of the civil engineering and architectural domain. The online training is held for twelve weeks by industrial professionals and domain experts of diverse potential. This AICTE approved course enables the students to earn three-course credits and a Glass in buildings: Design and applications certificate after completing the program.

Apart from the expert guidance, the course educators for the ‘Glass in buildings: Design and applications’ online certificate courses are Prof. K N Satyanarayana and Dr. E. Rajasekar from the Indian Institute of Technology.

The ‘Design Of Reinforced Concrete Structures’ online course is a study about the aspects of design structures in concrete provided by the Swayam online education platform by the ministry of education in India. The course on concrete design structures is a National Program on Technology Enhanced Learning(NPTEL) online course developed by the Indian Institute of Technology Kharagpur.

This faculty development program for the students pursuing civil engineering and architecture is held for twelve weeks. The course educator for the online program is Prof. Nirjhar Dhang from the department of civil engineering at IIT Kharagpur. This postgraduate-level course is approved by the All India Council for Technical Education and allows the students to earn three credits. The ‘Design Of Reinforced Concrete Structures’ training program is part of the civil engineering and structural design domains. The students will receive the course certificate with NPTEL and IIT Kharagpur logos.

The ‘Fluidization Engineering’ training program discusses fluidization in association with hydrodynamics and transport aspects for the students and industry professionals to gain valuable experience. The online National Program for Technology Enhanced Learning online course is provided by the Swayam online education platform. This free online training is developed and facilitated by the Indian Institute of Technology Guwahati for students from engineering and science backgrounds.

This faculty development program offered by the IIT Guwahati is organized for twelve weeks. The course educator for the course on fluidization is Dr. Subrata Kumar Majumder, a faculty in the department of chemical engineering at IIT Guwahati. This is an elective course for undergraduate and postgraduate level students which enables them to earn three credit points after completing the online training.

After completion of this ‘Fluidization Engineering’  online program, the eligible students are issued with the course completion certificate that consists of the logos of NPTEL and IIT Guwahati.

The ‘Analog Electronic Circuits’ online course is a study about metal-oxide-semiconductor field-effect transistors (MOSFET) and their applications in analog circuits. This is a National Program on Technology Enhanced Learning(NPTEL) free online training course provided by the Swayam under the ministry of education in India initiative. This program is developed and offered by the Indian Institute of Technology Delhi and the online classes are held for twelve weeks.

This faculty development program is a core course for undergraduate level students belonging to the domain of electrical, electronics, and communication engineering, or control and instrumentation, and VLSI design. The AICTE approved curriculum is instructed by the course educator, Dr. Shouri Chatterjee from the department of electrical engineering at IIT Delhi.

In the ‘Analog Electronic Circuits’ training program, the students will receive three credit points and a course completion certificate which is e-verifiable with the logos of NPTEL and IIT Delhi.

The ‘Industrial Safety Engineering’ online course is a study about the different aspects and operations of safety involved in engineering systems in the industry. This training program is a National Program for Technology Enhanced Learning online course and is provided on the Swayam online education platform. The elective course for postgraduate level students is offered by the Indian Institute of Technology Kharagpur.

This faculty development program is conducted for twelve weeks for the students belonging to domains of engineering, science, and management. The course on engineering safety systems is approved by the All India Council for Technical Education.

The course educator for the ‘Industrial Safety Engineering’ online training is Dr. Jhareswar Maity, faculty from the department of industrial and systems engineering at IIT Kharagpur. The students in this online course can earn three credits after completion of the program and will receive the course completion certificate fulfilling the required mandates.

The ‘Introduction to robotics’ online course is a study about the state-of-the-art technologies and techniques associated with designing robots and their applications. This National Program for Technology Enhanced Learning(NPTEL) free online course on robotics is provided on the Swayam online education platform. The online training is offered by the faculty of the Indian Institute of Technology Madras.

The program is conducted for twelve weeks and is a core course for the undergraduate and postgraduate level students of design engineering or robotics. The course instructors of this certification program are Dr. T Asokan from the department of engineering design, Prof. Balaraman Ravindran teaching computer science, and Dr. Krishna Vasudevan of the electrical engineering department. This AICTE approved faculty development program enables the students to receive three credits after completing the online training. The ‘Introduction to robotics’ e-certificate is issued to the qualified students with NPTEL and IIT Madras logos on it.

The ‘Flow Through Porous Media’ National Program for Technology Enhanced Learning (NPTEL) online course describes the classification and application of porous media flow with an understanding of industrial applications. This course is provided on the Swayam online education platform to the students of undergraduate, and postgraduate level from various disciplines of engineering which includes petroleum, biochemical, soil science, geotechnical, and hydrology. This elective course is developed and offered by the Indian Institute of Technology(IIT) Kharagpur.

This faculty development program on porous media flow will take twelve weeks to complete the course. The course instructor for the AICTE approved online training program is Prof. Somenath Ganguly from the department of chemical engineering at IIT Kharagpur. The candidates who take this elective course will be provided with three credits for their undergraduate or postgraduate program. Along with the course credits, the eligible students can get the course certificate which consists of the logos of NPTEL and IIT Kharagpur.

The ‘Mass Transfer Operations II’ online course is part of the National Program for Technology Enhanced Learning(NPTEL) and is provided as Swayam courses for undergraduate level students. This online program on ‘Mass Transfer Operations’ is designed and taught by the faculty of the Indian Institute of Technology Guwahati. 

This is a core course for the students and is categorized under the chemical engineering domain. The course instructor for the online training is Dr. Chandan Das from the department of chemical engineering at IIT Guwahati. The course study will focus on the aspects of 

Mass transfer and analysis, theoretically and experimentally. The students can earn three credits after completing this course and will be provided with a course completion e-certificate with the logos of NPTEL and IIT Guwahati which can be downloaded from the website.

This ‘Mass Transfer Operations II’ is a faculty development program approved by the All India Council for Technical Education that is organized for twelve weeks.

The ‘Linear Systems Theory’ online course is a study about linear systems and control associated concepts in control engineering. This course is a National Program for Technology Enhanced Learning free online program provided on the Swayam education portal. The course curriculum is developed and offered by the Indian Institute of Technology Madras.

The online program is scheduled for twelve weeks and is an elective course for undergraduate and postgraduate level students. This course which is a part of the electrical, electronics, and communication engineering along with control and instrumentation domain is a faculty development program that is approved by the All India Council for Technical Education.

The course educator for this online certification course is Prof Ramkrishna Pasumarthy from the department of electrical engineering at IIT Madras. The ‘Linear Systems Theory’ training program will allow students to gain three credits and an e-verifiable course completion certificate after completing the course.

The ‘Principles and Techniques of Modern Radar Systems’ is a study about the multisystem of radars in electronics engineering. The radar system principles program is a National Program for Technology Enhanced Learning Program that provides free online training to the students pursuing their undergraduate and postgraduate levels in electrical engineering, electronics and communication engineering, or communications and signal processing, on the Swayam education platform.

This elective course is offered by the Indian Institute of Technology Kharagpur for twelve weeks by the course instructor, Dr. Amitabha Bhattacharya, an associate professor from the department of electrical, electronics, and communication engineering at IIT Kharagpur.

The ‘Principles and Techniques of Modern Radar Systems’ online training program is approved by the All Indian Council of Technical Education and allows the students to gain three credits after completion of this course. The candidates of this faculty development program can avail of the certificate which is e-verifiable containing the logos of NPTEL and IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ online course is about the functioning and principles of various kinds of electro-mechanical instruments. This is a National Program for Technology Enhanced Learning online course by the online education platform Swayam. The online course is developed and organized by the Indian Institute of Technology Kharagpur.

This NPTEL free online course is conducted for twelve weeks and is a core course for the students of undergraduate level. It is categorized under the domain of electrical, electronics, and communication engineering, control, and instrumentation along with power systems and power electronics. The course instructor for the All India Council for Technical Education (AICTE) approved online program is Dr. Avishek Chatterjee from IIT Kharagpur. 

The ‘Electrical Measurement and Electronic Instruments’ training program enables the students to gain three credit points and provides the eligible students with an e-certificate with the logos of NPTEL and IIT Kharagpur after course completion.

The ‘Advanced Engineering Mathematics’ online course is a study about the analytical functions and applications of the various concepts and ideas that form the core of engineering mathematics. The National Program for Technology Enhanced Learning program (NPTEL) free online course is offered on the Swayam education platform for the undergraduate and postgraduate students of engineering and science.

The course curriculum is designed and provided by the Indian Institute of Technology Roorkee for twelve weeks. This certification course is a core course for undergraduate-level students. The course educator for this program is Dr. P. N. Agarwal from the department of mathematics at IIT Roorkee. The students of the ‘Advanced Engineering Mathematics online training program can earn three credit points. The candidates will also receive a course certificate that is e-verifiable with the authenticated logos of NPTEL and IIT Roorkee. The twelve weeks of training on the theoretical principles of the mathematical aspects of engineering and sciences enables the students to develop expertise in this domain.

The Turbulence and RANS Modelling Certification Course is a twelve weeks long course on turbulence theory and RANS modelling. The course available on the Skill-Lync platform covers all aspects of physics relating to the modeling of fluid turbulence.

The Turbulence and RANS Modelling Live Course aims to impart technical knowledge of different RANS turbulence models and Computational Fluid Dynamics (CFD) skills. The course will be delivered with the aid of hands-on exercises and industrial projects.

After the successful completion of the Turbulence and RANS Modelling Training Course via video lectures, hands on exercises and technical software training, learners will get access to a certificate of completion. Learners can request a one on one demon session of the course before enrolling.

The Battery System design for EV & ES using Matlab Online Course is a 12 week long course available on the Skill-Lync learning platform. The course will cover all subsystems of the battery system and equip learners with the skills required for designing battery systems using Matlab for the Electric Vehicle or Electric Storage industry.

The Battery System design for EV & ES using Matlab Certification Course is suitable for electrical engineering aspirants who are interested in conducting an in-depth study of battery systems. The course can be opted by both freshers and professionals who wish to learn about the applications of battery systems

The Battery System design for EV & ES using Matlab Live Course is delivered through online videos and industry projects that convey the topics effectively. After completion of this specialized course, all learners will receive a certificate of completion and 5% of learners will get a chance to win the merit certificate.

The Structural Design of Highrise Precast Buildings using ETABS Certification Course is a 12 week long course that explores the design structure of precast buildings according to the Indian codes of structural design. The course is available on the Skill-Lync learning platform.

The Structural Design of Highrise Precast Buildings using ETABS Live Course is suitable for civil engineering aspirants who wish to study in detail the structural analysis and design of highrise precast buildings with the aid of ETABS software.

After the successful completion of the Structural Design of Highrise Precast Buildings using ETABS software Training Course through video lectures, projects, and case studies, learners will be rewarded with a final certificate of completion.

The Network(RAN) Performance & Optimization Training Course is a 12 week long course that focuses on the concepts of LTE network design and LTE optimization. The course offered on the Skill-Lync platform provides a detailed understanding of different LTE KPIs and throughput KPIs.

The Network(RAN) Performance & Optimization Live Course is delivered with the help of video lectures and informative course content. The course makes use of technical projects and industry-relevant cases of Network (RAN) Performance and Optimization.

After successfully completing the Network(RAN) Performance & Optimization Certification Course, all learners will be rewarded with a course certificate and the top 5% will be granted a merit certification.

The Developing IoT Applications Online Course is a 12 week long course that provides specialized knowledge on Internet of Things (IoT) applications. The course provided on the Skill-Lync platform discusses the basic building blocks of IoT and the different technologies employed in IoT.

Through the Developing IoT Applications Training Course, learners will get a platform to develop end-to-end applications using IoT in various engineering domains. Through video lectures and technical projects, learners will be introduced to theoretical and practical applications of IoT.

After completion of the Developing IoT Applications Certification Course, learners will receive a certificate of completion and the top 5% of a class will get a merit certificate. There is a one-on-one course demonstration available for the course.

The ‘Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D’ online course is about the fundamental, detailed concepts and principles involved in roadway design. This civil engineering course is developed and provided by Skill Lync for the students to gain access to real-world projects as they will learn about design standards.

In this course, students will get hands-on experience with software such as InfraWorks (civil infrastructure conceptual design software), Civil3D (civil engineering design software), and Map 3D. Students will get familiar with the standard software practices associated with civil engineering. This civil engineering certification program enables the students to work with real-time projects using Civil 3D software in resurfacing project designing and a reconstruction project designing for a roadway in Florida. The course curriculum is developed for the students to gain technical knowledge and analytical skills for designing using the software. The ‘Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D’ training program provides certification with career guidance and technical support.

The Theoretical Mechanics Certification Course is a massive open online course that discusses the formulations of classical mechanics. The course is offered through the Swayam online platform. The course includes lectures that cover important topics like Lagrangian formulation, the Hamiltonian formulation, and the Poisson bracket formulation in the most effective ways.

The Theoretical Mechanics Training is offered through video lectures, course materials, and other supporting resources. The classes will be coordinated by Prof. Charudatt Kadolkar of IIT Guwahati. Once the course lessons are completed and the assessments are finished, candidates will get the Theoretical Mechanics Certification by NPTEL and IIT Guwahati.

The Engineering Fracture Mechanics Certification Course is a massive open online course that deals with core concepts of fracture mechanics. This is a first-level course on fracture mechanics and will be available on the Swayam online platform. The course includes video lectures, supporting materials, and assessments. You can complete the course within a duration of 12 weeks.

The Engineering Fracture Mechanics Training will be led by Prof. K. Ramesh of IIT Madras. This inter-disciplinary course constitutes weekly assignments aimed at equipping learners with the right level of knowledge and skills. After completing all course lessons and the assessments successfully, learners will get the Engineering Fracture Mechanics Certification by NPTEL and IIT Madras.

The Advanced Fluid Mechanics 3: Potential Flows & Boundary Layers Certification Course is the final module of a three-course series in incompressible fluid mechanics available on the edX platform. The advanced-level engineering course is designed and delivered by the expert faculty of the Mechanical Engineering Department at the Massachusetts Institute of Technology.

The Advanced Fluid Mechanics 3: Potential Flows & Boundary Layers Training will be provided through video lectures, demonstrations, lecture concept checks, practice problems, and extensive problem sets. After a learner completes all course steps and evaluations, they will receive the Advanced Fluid Mechanics 3: Potential Flows & Boundary Layers Certification by edX and Stanford University. The candidates will be getting the option to choose from among the 2 tracks, one is the audit track and the other is the verified track. If one wants limited but free access their pick can be the audit track whereas if someone needs unlimited course material access they may upgrade to the paid verified track.

The Advanced Fluid Mechanics 1: Fundamentals Online Course is the first among the three courses in the series of incompressible fluid mechanics. This advanced-level engineering course aims to cover the fundamental concepts and principles of fluid mechanics and its relation with continuum mechanics and hydrostatics. The course is led by the Department of Mechanical Engineering at the Massachusetts Institute of Technology.

Advanced Fluid Mechanics 1: Fundamentals Training is done through video lectures and demonstrations by experts. Learners will be able to work on practice problems and problem sets to enhance their knowledge level and test their progress. Once all the steps are completed and the assessments are finished, learners will receive the Advanced Fluid Mechanics 1: Fundamentals Certification by edX and Stanford University.

Edx has 2 tracks in which the students can be enrolled so that they can finish off the course- one is the audit track and the other is the verified track. One track offers limited free access to the course materials but no certificate after completion whereas the verified track is the upgraded version that gives unlimited but paid access to the course materials.

The Aircraft Stability and Control programme by Swayam is designed to help the candidates understand what features to include in the aircraft so that it remains statically stable. The online course will cover aircraft manoeuvres extensively and go into the finer details about aircraft flying. 

The programme aims to create a solid background for designing an aeroplane from the aspects of stability and control. Swayam’s Aircraft Stability and Control course is a core course intended for undergraduate students, under the category of Aerospace Engineering and Flight Mechanics. Furthermore, this programme will teach them how to introduce specific features in the aircraft so that the pilot can fly the plane at free will. 

The Aircraft Stability and Control course by Swayam is an online undergraduate-level course and takes around 12 weeks for completion. This course also provides video lectures and course material, along with weekly assignments and quizzes for self-assessment. Candidates will be able to download or print the reading material for convenient learning.