Online Engineering And Architecture Courses & Certifications

The Digital Signal Processing certification course delves into discrete-time signals and systems. The course is tailored for ECE/EEE undergraduates with a prerequisite in Networks and Systems. Topics include z-transform, frequency response, sampling, and the Discrete Fourier Transform, equipping students with fundamental skills in signal processing.

With the Digital Signal Processing certification by NPTEL, students gain a comprehensive understanding of discrete-time signal fundamentals. They are prepared to apply these concepts in real-world scenarios within the realm of Electrical Engineering, setting a strong foundation for further academic pursuits or professional endeavors.

The DC Power Transmission Systems certification course delves into power transmission systems. Led by Professor Krishna S, students explore topics like line-commutated converters, DC link control, and filter design. Prerequisites include knowledge of circuit analysis and power electronics, catering to both undergraduates and postgraduates.

With the DC Power Transmission Systems certification by NPTEL, students gain insights into the complexities of DC transmission technologies, preparing them for careers in electrical engineering. The curriculum blends theoretical lectures with practical applications, enhancing students' understanding of the material covered.

The Optical Engineering certification course covers fundamental concepts such as geometric optics, lens systems, and aberrations, preparing students for practical applications in industries like biomedical instrumentation and metrology. With an emphasis on prerequisites in electromagnetics, the course targets third or final year undergraduates and first-year postgraduates.

Students gain insight into the application of optical principles in engineering contexts. The Optical Engineering certification by NPTEL equips students with the knowledge and skills needed to understand, design, and implement optical systems effectively. The course helps students become well-prepared for the challenges of utilizing optics in various industries.

The Analog Electronic Circuits certification course delves into circuit operation from fundamental principles. Taught by Prof. Shanthi Pavan, an esteemed figure in the field, it covers topics including MOSFET characteristics, amplifier design, and feedback systems. With a focus on intuition and derivation, students develop a strong foundation applicable to semiconductor design.

With the help of the Analog Electronic Circuits certification by NPTEL, participants explore transistor biassing, opamp design, and compensation techniques, gaining essential knowledge for careers in semiconductor design and related industries. The course explores high-speed analogue circuit design which enriches the learning experience, ensuring students are well-equipped for further endeavors in analogue electronics.

The Image Signal Processing certification course delves into both basic and advanced concepts in image processing. Participants will explore topics such as image formation, geometric transformations, unitary image transforms, and advanced techniques like image restoration and 3D shape recovery. This course equips learners with valuable skills sought after by leading companies worldwide.

With a focus on real-world applications, including those in Google and Amazon, learners gain practical insights into the field's nuances and challenges. With the Image Signal Processing certification by NPTEL, students develop a solid foundation in digital image processing, preparing them for diverse career opportunities in industries at the forefront of technological innovation.

The Transport Phenomena in Materials certification course is a 12-week duration programme. The certification course offers a comprehensive curriculum that includes mathematical foundations of transport phenomena, control volume formulation, and friction factors. The prerequisite for this course is the students must have a Mathematics course in the first year at the undergraduate level.  

This certification course's intended audience is undergraduate students of Metallurgical or Materials Engineering and related disciplines. The Transport Phenomena in Materials certification by NPTEL provides students with in-depth knowledge of concepts of fluid flow, heat transfer, and mass transfer with behaviour and processing of engineering materials.

Also Read: Metallurgical And Materials Engineering Certificate Courses

The Foundations of Computational Materials Modelling certification course is a 12-week duration programme. The certification course offers an extensive curriculum that covers the foundations for building computational samples of crystals and introduces statistical mechanics and its connection to molecular dynamics. The intended audience for this course is all Engineering students.  

The students must have a basic Materials Science Course at the undergraduate level, MATLAB programming, and familiarity with LINUX to join the Foundations of Computational Materials Modelling certification by NPTEL. The students will gain a deep understanding of Molecular dynamics using LAMMPS, the construction of 2D and 3D crystals in MATLAB and statistical mechanics.

Also Read: Computational Fluid Dynamics Certificate Courses

The Fundamentals of Gas Dynamics certification course duration is 12 weeks and the prerequisite for this course is basic knowledge of thermodynamics and fluid mechanics. The certification course offers a comprehensive curriculum that includes an introduction to compressible flow and its constitutive equations, fluids, control volume analysis, oblique shocks, Theta-Beta-M relation, and shock polar curves. 

The students gain in-depth knowledge of various topics such as expansion fans, Prandtl-Meyer flow, and energy equations converging nozzle. The Fundamentals of Gas Dynamics certification by NPTEL provides students with the required skills and knowledge to excel in the field.

Also Read: Online Mechanical Engineering Courses & Certifications

The Engineering Thermodynamics certification course is a 12-week duration programme. It is the first-level thermodynamics course designed for undergraduate students from the ME, CH, AE, and MM departments. This certification course will be beneficial for the students preparing for competitive exams such as GATE.

The Engineering Thermodynamics certification by NPTEL aims to provide a deep understanding of concepts and laws of energy conversion which deals with heat and work interactions. The certification course offers a comprehensive curriculum that covers basic concepts, tutorials for work and heat, and the first law of thermodynamics for systems, pure substances, and thermodynamic cycles. 

Also Read: Online Thermodynamics Courses & Certifications

The Micro and Nano Scale Energy Transport certification course offers 12 weeks or 30 hours of extensive learning. The certification course offers a comprehensive curriculum that covers the fundamentals of Micro and Nanoscale transport in different fields of interest such as thermal dissipation from electronic devices, and Micro electro mechanical systems and sensors (MEMS). 

This certification course is specially designed for students with a background in Mechanical, Aerospace, Electrical Engineering and Physical Sciences. The Micro and Nano Scale Energy Transport certification by NPTEL prerequisite is Undergraduate thermodynamics, fluid mechanics and heat transfer. This course gets industry support from various companies dealing with nanotechnology such as Intel, and IBM.

Also Read: Online Electrical Engineering Courses & Certifications

The Electron Diffraction and Imaging certification course is a 12-week duration programme. The certification course prerequisite is knowledge of basic optics and physics. This course offers an extensive curriculum that covers electron diffraction and imaging aspects such as symmetry in crystals, reciprocal space and electron microscope, different types of projections, and fundamentals of diffraction. 

The students will also explore the contrast theory (kinematical and dynamical theory) and phase contrast microscopy after completing the Electron Diffraction and Imaging certification by NPTEL. They will also learn the basics of electron crystallography, computation of intensity of diffraction pattern, and a brief introduction to recent techniques in electron microscopy.

Also Read: Free Mechanical Engineering Courses & Certifications

The Acoustic and Noise Control certification course is a 12-week duration programme. The certification course offers a comprehensive curriculum that includes sound, acoustics, noise pollution, steady state, DB Arithmetic, and acoustic measurements. The certification course focuses on introducing the human factors that influence the perception of sound. 

The students will gain in-depth knowledge of the foundations and concepts of acoustic wave propagation and duct acoustics after completing the Acoustic and Noise Control certification by NPTEL. They will also learn the octave band frequency analysis, intermittent noise and noise rating. Students will be able to apply the principles and techniques with the help of leading industry experts.

Also Read: Free Mechanical Engineering Courses & Certifications

The Defects in Materials certification course is a 12-week duration programme. The certification course aims to provide a brief introduction to the various types of defects and how their interaction can used to control the properties. The certification course covers a comprehensive curriculum that covers a brief introduction to perfect crystals, defect classification in crystalline systems, and defect interaction. 

Students will learn the role of defects in controlling, and introduction to techniques for characterization of defects. The Defects in Materials certification by NPTEL equips students with the necessary skills and knowledge of the industry. They will also gain in-depth knowledge of the role of dislocations in static and dynamic strain ageing, the strength of alloys, deformation of poly-crystals and fracture.

Also Read: Online Metallurgical And Materials Engineering Courses & Certifications

The Health, Safety, and Environmental Management in Offshore and Petroleum Engineering certification course is a 12-week duration programme. The certification course provides knowledge of safety and environmental issues in the petroleum industry. The certification course's intended audience is B.E/B.Tech, M.E/M.Tech, M.S, B.Sc, M.Sc, and PhD.

The certification course focuses on educating the candidates to identify the risks that can occur at any stage of operation. The Health, Safety, and Environmental Management in Offshore and Petroleum Engineering certification by NPTEL trains the students to quantify and manage the risks that occur by the leading industry experts.  

Also Read: Online Naval Architecture And Ocean Engineering Courses & Certifications

The Transform Techniques for Engineers certification course is a 12-week duration programme. The students must know Calculus to obtain this certification course. The certification course covers a wide range of topics, including an introduction to the Fourier series and finding the Fourier series of a periodic function and Fourier transforms over real lines.     

Students will receive a deep understanding of the Fourier transform and its properties, Fourier transform and its applications from the Transform Techniques for Engineers certification by NPTEL. The students will get hands-on training with the support of leading industry professionals and apply it to real-world projects. 

Also Read: Online Engineering Courses & Certifications 

The Surface Facilities for Oil and Gas Handling certification course is a 12-week programme. The course focuses on teaching students how to separate crude oil and natural gas into their components at surface facilities. The prerequisite for this course is students must know the concept of petroleum drilling, completion and production along with basic engineering and applied mathematics knowledge. 

The undergraduate and postgraduate in Petroleum, Mechanical and Chemical Engineering students are the intended audience for this course. The Surface Facilities for Oil and Gas Handling certification by NPTEL covers a comprehensive curriculum that includes an introduction to drilling, completion, production, surface facilities, fluid properties and units, oil, water, sand and gas separation, coalescence, and coalescing media. 

Also Read: Online Oil And Gas Management Courses & Certifications

The Inverse Methods in Heat Transfer certification course is a 12-week programme. The prerequisite for this course is that it would be useful if the students have pursued an undergraduate course in Heat Transfer. They must also know probability, calculus and matrix algebra. The intended audience of this certification course is undergraduate and postgraduate students.  

The Inverse Methods in Heat Transfer certification by NPTEL provides an overview of the inverse problems in heat transfer and ways of solving them through examples. The certification course covers a comprehensive curriculum that covers an introduction to inverse problems, a statistical description of errors, inverse problems as optimisation problems, and classical techniques. 

Also Read: Online Mechanical Engineering Courses & Certifications

The Applied Thermodynamics certification course is a 12-week programme. This course is designed for undergraduate students and is supported by the Engineering Thermodynamics or Basic Thermodynamics industries. The certification course aims to equip the students with the required skills and knowledge to carry out a thermodynamic analysis of any device. 

The students will gain hands-on training with the support of leading industry experts. The Applied Thermodynamics certification by NPTEL provides a comprehensive curriculum that includes the derivation of entropy change of control volume, the exergy of a system, and tutorials. The students will also learn about the thermodynamic cycle - Rankine cycle, and Brayton cycle with intercooling. 

Also Read: Online Thermodynamics Courses & Certifications

The Design of Mechanical Transmission Systems certification course is a 12-week programme. This course's intended audiences are Mechanical Engineering, Automobile Engineering, Engineering Design, and Production Engineering students. The certification course covers an extensive curriculum that covers the evaluation, and application of Gearbox, GP, Machine Tool Gearbox - Kinematic diagram construction, module calculation concept, brake and clutch.   

The prerequisite for this certification course is knowledge of the Strength of Materials and the Design of Machine Elements. The Design of Mechanical Transmission Systems certification by NPTEL is supported by various industries such as the Automotive Industry, Gearbox manufacturers and Brake manufacturers. With the support of industry professionals, the students gain hands-on training.  

Also Read: Online Mechanical Engineering Courses & Certifications

Chemical and Biological Thermodynamics: Principles to Applications is a 12-week certification course by the IIT Bombay. This course provides students with an in-depth exploration of thermodynamic principles. Students will delve into fundamental concepts of thermodynamics and their significance in the behaviour of chemical reactions through the online certification course.

The Chemical and Biological Thermodynamics: Principles to Applications certification by NPTEL covers topics including the laws of thermodynamics, principles, and applications. Students are provided with exposure to a hands-on learning approach with equal emphasis on theoretical as well as practical applications throughout the Chemical and Biological Thermodynamics: Principles to Applications course.

Also Read: Online Thermodynamics Certification Courses 

Inorganic Chemistry of Life: Principles and Perspectives Certification course is designed to provide students with the necessary knowledge of inorganic chemistry in biological systems. With the help of interactive lectures, students will gain a deep understanding of inorganic chemistry through the Inorganic Chemistry of Life: Principles and Perspectives Certification by NPTEL.

Inorganic Chemistry of Life: Principles and Perspectives training seeks to enhance students' understanding of the critical role played by inorganic chemistry. The course focuses equally on theoretical as well as practical concepts of inorganic chemistry making students proficient in the prospects of inorganic chemistry. Students are provided valuable insights to enrich their understanding of this interdisciplinary field.

Also Read: Online Chemistry Certification Courses

Symmetry and Group Theory Certification course is a 12-week certification course designed to provide students with the fundamental principles of symmetry and its application in various scientific applications. Students will analyse how to classify symmetrical objects and systems using group theoretical methods through the Symmetry and Group Theory Certification by NPTEL.

Symmetry and Group Theory training covers key concepts in the aspect of symmetry and group theory, understanding the diversified implications of this theory across various scientific domains. Students are provided greater opportunities in the form of hands-on learning, case studies, and many more options to enhance their overall understanding of symmetry.

Also Read: Online Chemistry Certification Courses

Remote Sensing and GIS for Rural Development Certification course is a 12-week certification course that provides students with the knowledge and essential skills needed to harness the power of remote sensing and geographic information systems (GIS). Students learn the fundamental principles and remote applications of remote sensing Remote Sensing and GIS for Rural Development certification by NPTEL. 

Remote Sensing and GIS for Rural Development training provides a deep understanding of how remote sensing data is acquired through satellites and other platforms. The course also explores how GIS techniques can facilitate spatial analysis, decision-making, and the importance of planning processes in rural development initiatives.

Also Read: Online Geosciences And Remote Sensing Certification Courses

Interpretative molecular spectroscopy Certification course is a 12-week certification course that offers the fundamentals of principles, methodologies, and applications of molecular spectroscopy in chemistry. Students are provided a deep understanding of theoretical as well as practical applications of the fascinating world of analog electronics with the  Interpretative molecular spectroscopy certification by NPTEL. 

Interpretative molecular spectroscopy training provides a practical as well as theoretical understanding of principles governing the interaction of electromagnetic radiation with molecules. Students will be able to gain diverse expertise in various molecular topics structures, functional groups, and chemical compounds using spectroscopic methods. With a hands-on learning approach, they will be able to excel in their domain and research approaches. 

Also Read: Online Chemical Engineering Certification Courses

Environmental Geotechnics Certification course is a 12-week certification course designed to comprehensively explore the relationship between geotechnical engineering principles and environmental aspects. Students are provided with a deep understanding of how geological materials and environmental systems work through the Environmental Geotechnics certification by NPTEL. 

Environmental Geotechnics training seeks to provide students with theoretical as well as practical knowledge of geotechnics. Case studies and hands-on projects are used within the certification programme to ensure the long-term health and resilience of natural and built environments. Students are provided with greater knowledge necessary to navigate the essentials between human infrastructure and the natural world.

Also Read: Online Geotechnical Engineering Certification Courses

The Concrete Technology Certification Course is a 12-weeks long course conducted by Indira Gandhi National Open University. The course helps candidates understand the various processes included in concrete production and concreting operations. The course is taught through video lectures from experts covering important topics on concrete production and operation.

The Concrete Technology Training Course offered by Swayam is taught by Prof. Dr. Munish Kumar Bhardwaj, a distinguished member of IGNOU. The course offers valuable insights on different steps involved in concreting operations including proportioning, mixing, transporting, placing, compacting, finishing, and curing of concrete.

The Concrete Technology Online Course is a diploma-level course that deals with the study of concrete in a detailed manner. The course units constitute discussions on the properties of concrete and the design of concrete mix. It also deals with the steps in the production of concrete and other concreting operations.

The Repair and Maintenance of Buildings Course is a massive open online course that discusses the defects in buildings and the factors behind their deterioration over the course of time. The course explains the importance of proper maintenance and infrastructure management after the building construction to increase its enduring power.

The Repair and Maintenance of Buildings Course offered by the Swayam portal acquaint civil engineering aspirants with the detailed aspects of building maintenance and repair. The modules are prepared in a way to helps learners grasp concepts quickly and efficiently without any difficulties.

The Repair and Maintenance of Buildings Training Course are coordinated by Dr. Munish Kumar Bhardwaj, Professor at the School of Engineering and Technology, Indira Gandhi National Open University, New Delhi. The 3 credit course is taught over 12 weeks with the help of informative video lectures by experts.

The Advanced Fluid Mechanics 3: Potential Flows & Boundary Layers Certification Course is the final module of a three-course series in incompressible fluid mechanics available on the edX platform. The advanced-level engineering course is designed and delivered by the expert faculty of the Mechanical Engineering Department at the Massachusetts Institute of Technology.

The Advanced Fluid Mechanics 3: Potential Flows & Boundary Layers Training will be provided through video lectures, demonstrations, lecture concept checks, practice problems, and extensive problem sets. After a learner completes all course steps and evaluations, they will receive the Advanced Fluid Mechanics 3: Potential Flows & Boundary Layers Certification by edX and Stanford University. The candidates will be getting the option to choose from among the 2 tracks, one is the audit track and the other is the verified track. If one wants limited but free access their pick can be the audit track whereas if someone needs unlimited course material access they may upgrade to the paid verified track.

The Advanced Fluid Mechanics 1: Fundamentals Online Course is the first among the three courses in the series of incompressible fluid mechanics. This advanced-level engineering course aims to cover the fundamental concepts and principles of fluid mechanics and its relation with continuum mechanics and hydrostatics. The course is led by the Department of Mechanical Engineering at the Massachusetts Institute of Technology.

Advanced Fluid Mechanics 1: Fundamentals Training is done through video lectures and demonstrations by experts. Learners will be able to work on practice problems and problem sets to enhance their knowledge level and test their progress. Once all the steps are completed and the assessments are finished, learners will receive the Advanced Fluid Mechanics 1: Fundamentals Certification by edX and Stanford University.

Edx has 2 tracks in which the students can be enrolled so that they can finish off the course- one is the audit track and the other is the verified track. One track offers limited free access to the course materials but no certificate after completion whereas the verified track is the upgraded version that gives unlimited but paid access to the course materials.