Hi, if you are not sure of metallurgy and material science that this is what you want to do for the rest of your life than it is advised to not take up a branch that is very specialized. You can opt for more open branches like Mechanical, CS, IT. Chemical Engineering has a huge demand when it comes for Job opportunities. It would be a safer option than to go for Metallurgy and material Science. If you think that the new IIT you got Mechanical in is going to bloom over the years than it is fine. If you think that the value of that IIT won't be that much you can ignore. If you are ready to compromise with the IITs you wish to get in then you can choose Chemical or Mechanical. Below is the link for you to compare your colleges and it will help you narrow down your choices.

https://www.careers360.com/compare-colleges

Hope this helps. If you still have doubts please feel free to comment.

Hey there

Mentioned below are the points of comparison between two institutes:

IIT Indore:

• This Institute is recognised as Institute of national importance.
• It is an autonomous Institute
• It has been ranked 4 for MSc Biotechnology
• The highest salary package offered to any student was for 65 lakh.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.careers360.com/university/indian-institute-of-technology-indore/amp&ved=2ahUKEwiOl4XqrNnzAhVRzTgGHQkNBEEQFnoECAsQAg&usg=AOvVaw2rW773Y8ZfbHjCpNprMaCK&ampcf=1

IIT Thirupathi:

• It is a public autonomous Institute.
• The highest salary offered is 22 lakh per annum
• In the recent years 100% summer internships has been registered.

By above points it can be said that both of the institutes are good in their respective areas. So it is difficult to tell which is much better.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.careers360.com/university/indian-institute-of-technology-tirupati/amp&ved=2ahUKEwiSz9TzrNnzAhWT3jgGHfY7BU8QFnoECA4QAg&usg=AOvVaw37G9f9lXebhC9CB3ufyetp&ampcf=1

If you focus solely on the branch then electrical will win and you have your answer but if you look in overall prospective then you will notice that iit roorkee has better brand value than ism dhanbad so the decision remains between i&p and civil where in terms of placements civil might win but i&p is a branch related to mechanical engineering and its applicability in future cannot be counted out. So at the end you have to choose but overall iitr civil or i&p both are good choices.

Hello Koushik,

It's a bit difficult to compare these two because these two IITs are considered to be good but if you see in terms of ranking obviously IIT Madras has an upper hand over iit bhu.

So, it also depends on your interest that whether you like coding or you like to deal with circuits. But as per current scenario I would recommend you take up iit bhu.

Hi

With  93 percentile

• Your rank will be  around  71610 - 80500    as per our rank predictor at https://engineering.careers360.com/jee-main-rank-predictor

Your obc rank will be around 20k- 22k

With above  rank, you have very low  chances in NITs for any branch

For example,

Closing rank for some of the lower NITs for OBC  category under state is provided below in 6th round of josaa counselling 2020 :-

• NIT Mizoram ,civil engineering :-14730 obc rank

• Nit nagaland ,Electronics and Instrumentation Engineering (4 Years, Bachelor of Technology) :-  15340 obc rank

• National Institute of Technology AgartalaProduction Engineering (4 Years, Bachelor of Technology :- 15659  obc rank

• National Institute of Technology, Surat:-Chemistry (5 Years, Integrated Master of Science):-16453 obc rank

You can verify the above at

https://josaa.nic.in/Result/Result/currentorcr.aspx

So, to get a seat in NIT you should get at least around 15000 - 16000 OBC rank i. e around 94.5 - 95 percentile.

You have some chances in following gftis

-----------) Sant Longowal Institute of Engineering and Technology:- Food Technology:- 21480 obc rank

-----------) Institute of Technology, Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur, (C.G.) :- Industrial and Production Engineering:- 21390 obc rank

-----------) National Institute of Food Technology Entrepreneurship and Management, Sonepat, Haryana :- Food Technology and Management:-21889 obc rank

This has been predicted on the basis of past year data but  cut off/closing rank for colleges keeps changing every year depending upon many factors like number of students that appeared in the examination, difficulty level of the JEE main question paper for different shifts etc

To have a personalised report on your chances of getting a college you can go through our college predictor, it will give you complete list of colleges which you can get on the basis of the category you belong to,  your home state, your gender etc, the link for  jee main college predictor is provided below

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

To help you further,

To give you an idea of qualifying cut off, JEE mains 2020  qualifying  CUT OFF percentile to be eligible for jee advanced is given below for different category

>>>> General :-     90.3765335

>>>> GEN-EWS :-  70.2435518

>>>> OBC-NCL :-  72.8887969

>>>> SC     :-           50.1760245

>>>> ST :-                39.0696101

>>>> PwD :-            0.0618524

You can check the same at our page the link is provided below

https://engineering.careers360.com/articles/jee-main-cutoff

Thankyou

Hello aspirant,

Both the colleges were regarded as India's best engineering institute. You can choose any branch according to your interest.

I'm describing both the institution for the respective branch recent placements records, hope it will help you to make a better decision;

IIT MADRAS - Electrical Engineering -> Almost 80% of students get placements from EE branch yearly. The highest package received in the year 2018-19 is 39LPA. You can expect an average package around 10LPA from the recruiters. The companies which have visited the campus for placements were Flipkart, Huawei, Intel, Cisco, IBM, Microsoft, Qualcomm, Samsung, etc.

For more information regarding the college, you can visit the link given below,

https://www.careers360.com/university/indian-institute-of-technology-madras

IIT HYDERABAD - AI & ML Engineering -> As AI Engineering were included in IIT Hyderabad course recently so I didn't find any previous placements records. Well, you will get a good placement with a handsome package. That is sure. As AI is on trend now every new gadgets is working or will be working with AI in future. So in the field there is a good scope ahead.

For more information regarding the college, you can visit the link given below, https://www.careers360.com/university/indian-institute-of-technology-hyderabad

Hope it helps you..

Best of luck..

Hii Goutham,

Hope you are doing good.

You have good scores in every aspect. MS in USA is globally known for its advanced curriculum and well-experienced teaching faculties. MS in US will expand your horizons beyond just the course field.

Necessary eligibility:

1. GRE scores are not required for applicants who have an undergraduate or graduate degree from a U.S. institution. GRE scores are required for applicants who don’t have a degree from a U.S. institution.
2. TOEFL, IELTS, or Duolingo scores if applicable

Institutions for Ms in ECE:

1. Massachusetts institute of technology, Cambridge
2. Stanford University, Stanford
3. University of California, Berkeley
4. California institute of technology, Pasadena
5. Georgia institute of technology, Atlanta
6. University of Illinois Urbana Champaign, Urbana

Above are few universities.

Hopefully this will work for your query.

best wishes ahead.

Hi aspirant, since you want to compare NIT, Calicut and MNNIT, Allahabad so let me tell you that both the colleges are the top NIT Institutes in the country both have very good academics with good placement records.

For comparison you can visit the below mentioned link;

https://www.careers360.com/compare-colleges

Thank You.

Hello.

If you want to pursue your education in Jaipur then GIT Jaipur is a good option and you can go for CSE in that college. But before you make a decision please be thorough on the sort of placements and opportunities available there. On the other hand, if you opt for Electronics and Computers ,then you'll be studying both the courses. It'll be an extra help as you'll be able to choose a career path from both the streams. There is a lot of scope in this particular branch and you also get to learn embedded which is great. Also, MBM is a good college and I think it. An provide you with opportunities.

Hello ,

The topics in physics that would be useful in CS / EEE / ECE  higher studies

• Work, Energy & Power.
• Properties of Bulk Matter.
• Waves
• Oscillations
• Electrostatics
• Current Electricity
• Magnetic Effect of Current & Magnetism
• Alternating Current
• Electromagnetic Waves
• Semiconductor Electronics: Materials, Devices and Simple Circuits

The topics in maths that would be useful in CS / EEE / ECE  higher studies

• Algebra
• Calculus
• Linear Programming
• Trigonometric Functions
• Principle of Mathematical Induction     (logical base for CS and Ec)

Hope this helps you

Best wishes for your future