my percentile is 78.4 CRL 197037 ews rank 28k will I get mnit Jaipur metallurgy or chemical branch in csab round ??
Hello Aspirant,
See for now CSAB server is not working so we are unable to help you with the cut-offs of CSAB round but we can guide you through JOSAA counselling.
So as we go through the latest cut-offs of JEE-Main 2020 of JOSAA 6th round then it shows that :-
Closing EWS rank for NIT Jaipur was :-
- Metallurgical and Materials Engineering branch - 6343 (Other state quota)
- Chemical Engineering branch - 4568 (Other state quota)
So you have quite low chances to get NIT Jaipur either with Metallurgical and Materials Engineering or with Chemical Engineering branch even in CSAB round because your CRL rank is much higher than the cut-offs.
You can check out the latest cut-offs from the link given below :-
https://josaa.nic.in/Result/Result/currentorcr.aspx
Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.
To have a list of all those colleges which you can get based upon your marks, category, and state you can use JEE-Main College Predictor:-
https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer
If you are preparing for JEE-Main 2022 then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main 2022 :-
https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA
You can also check out the JEE-Main 2021 cut-offs and know whether you have qualified for JEE-Advance 2021 or not, so it is given below :-
==>> Common Rank List (CRL) - 87.8992241-100.0000000 Percentile
==>> GEN-EWS - 66.2214845-87.8950071 Percentile
==>> Other Backward Classes (OBC-NCL) - 68.0234447-87.8950071 Percentile
==>> Scheduled Caste (SC) - 46.8825338-87.8950071 Percentile
==>> Scheduled Tribe (ST) - 34.6728999 87.8474721 Percentile
==>> PwD - 0.0096375-87.8273359 Percentile
You can check more details about JEE-Main 2021 cut-offs from the link given below :-
https://engineering.careers360.com/articles/jee-main-cutoff
I hope this information helps you.
Good Luck for your future!!
I got 511 in OBC-NCL PWD joining nit surathkal metallurgy v/s iiit kancheepuram cse which is the better option
Hello Aspirants,
Hope you doing well, Its totally depends on your interest as both college will provide you a greater opportunities but yeah iit cse will provide you an edge then nit with metallurgy so if you are into coding and all stuff i would suggest you go with iit with cse
if you want to know which colleges are accepting your rank you can check it with the help of Jee College Predictor where you have to put your rank or marks and you will be shown a list of the colleges according to their ranking with their placement fees and everything and here you can make a wise decision to get into a good college so go for it and check it now here's the link
https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ic
WHICH IS BEST INTEGRATED MSC CHEMISTRY IN NIT ROURKELA OR ECE IN IIIT SRI CITY OR METALLURGY IN NIT ROURKELA????
Dear aspirant,
As you have mentioned that you have got integrated max chemistry in nit Rourkela and metallurgy in nit Rourkela so I would recommend you not to join the msc chemistry and kindly go with the normal 4 year b.tech course.
Because in one college if you would spend five years there won't be any personal development. And if you do not want to do msc then you should not go but if you are interested in this line only then opt for it.
For more information you can check out the link given below-
https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer
WHICH IS BEST INTEGRATED MSC CHEMISTRY IN NIT ROURKELA OR METALLURGY IN NIT DURGAPUR OR METALLURGY IN NIT NAGPUR????
Hello aspirant,
Hope you are doing well.
To be honest, metallurgy has no scope these days. Hardly companies come to hire a true metallurgical engineer. You again anyhow have to try your hands on coding if you want to get a high package job. However I feel doing an MSc in Chemistry would be a better option. Because if later,:
- you develop interest towards chemistry, you can do research and go for PhD
- you can sit for UPSC exams
- you will be a postgraduate that will be helpful in many ways whil applying for a PhD.
- you can appear for MBA as well.
Hope that you got the answer to your question. Feel free to comment back incase of any doubts. All the Best!
My friends category rank is around 5000 and he belongs to SC category. Can he get Metallurgy and Materials Engineering at NIT Tiruchirapalli?
Hello Sarah. You mentioned your friend belongs to SC category and you want to know whether he has any chance to get chance at Metallurgical and Materials Engineering in NIT, Tiruchilappalli. Well, based on previous years' cutoff trends, your friend has good opportunity to get admission to Metallurgical and Materials Engineering at NIT, Trichy.
In 2019, JEE Main Cutoff Rank for SC category for admission to Metallurgical and Materials Engineering at NIT, Trichy was 117840 (for both Male and Female) via CSAB Counselling .
However, please note that it is less likely for your friend to get chance at NIT Tiruchilappalli via JoSAA Counselling.
If you want to know more about cutoffs for NIT Tiruchirappalli then follow this link:
https://www.careers360.com/university/national-institute-of-technology-tiruchirappalli/cut-off
or you can refer to this article for going through the cutoff details based on previous years' data:
https://engineering.careers360.com/articles/jee-main-cutoff-for-nit-trichy
To get a personalized report on your friend's eligibility of getting a college, ask him to can use the JEE Main 2021 College Predictor , it will show him the complete list of colleges which he can get on the basis of the category he belongs to, his home state etc, the link for JEE Main College 2021 Predictor is provided below:
https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer
I hope this information is enough to answer your query.
I wish you and your friend all the best for your future.
Thank you.
which is better to join nit jalandhar industrial and production/ece nit sri nagar/iiest metallurgy/civil nit agartala/amrita ece. please help me out i got 20k in obc category these are one of the branches that im getting according to josaa counselling 2020.which one hould i choose those .
Hello aspirant ,
If you are interested in electronics then my opinion is that you should choose ece branch (ece nit Srinagar) Because nowadays the scope in ece is increasing.
Also Civil branch is a good one (civil nit Agartala) If you don't mind for living other city for 4 years.
These are just suggestions, if you are interested in the rest of your preferences, you can also consider it.
All the best for your Future !
which is better to join METALLURGY in PEC,CHANDIGARH OR METALLURGY IN IIEST OR ECE IN PONDICHERRY ENGENEERING COLLEGE ACCORIDING TO PLACEMENT STATISTICS AND FACULTY....
IIEST Shibpur Metallurgical Engineering is perhaps the Oldest Metallurgy Department in India with IIT KGP and BHU. You may definitely Consider IIEST Metallurgy and be guaranteed of excellent faculty, placements and research facilities. Top Companies like Vedanta, Jindal Stainless, Tata Steel, Tata Steel BSL, JSPL, Tata Metaliks, Tata Steel LP as well as Top Recruiters from Non Core Sector like Infosys, TCS, IBM visit the Campus. Besides this, incase youre interested in pursuing Masters or PhD Abroad, this is the best Option.
colleges list for metallurgy and material engineering in India
Hello,
Some of the colleges that offer courses in metallurgy and material engineering in India are listed below:
-
Indian Institute of Technology Bombay
-
Indian Institute of Technology Madras
-
Maharaja Sayajirao University of Baroda, Vadodara
-
Indian Institute of Engineering Science and Technology Shibpur
-
Indian Institute of Technology Delhi
You can get the full list from the below given link along with brochre and details about each college:
Good Luck
Hi,I am Gyanprakash Narayan and I have secured 1403 state rank in MHT CET 2020 state level engineering entrance exam, so should I take metallurgy in College of Engineering Pune or E&TC in Pune institute of Computer Technology, if I have to look for govt jobs in future.
hi,
see your rank is excellent , however I want to clarify about the government jobs of engineering discipline scenario in recent market trends. government sectors engineering jobs in mostly available for electrical engineering, mechanical engineering, electronics and telecommunications and civil engineering domain, so if your main target is to get government job in engineering domain , you should take any of the above mentioned streams.
To know about the probable college name based on mhtcet score , you may use careers360 college predictor tool: