All Questions

Indian Institute of Information Technology Design and Manufacturing Kancheepuram

Follow
Showing 111 - 120 out of 285 Questions
62 Views

which is better, 4yrs btech from iiit Basar or 5yrs dual degree from iiit kancheepuram?plz answer me sir/madam. plzzzzzzzzzzzzz

Shruti Smaranika 12th Oct, 2020

Hello aspirant,

You've asked whether 4 years B. Tech from IIIT Basar or 5 years dual degree from IIIT Kanchipuram will be better. Pretty nice. I can tell you straight away to go and pursue your dual degree at IIIT Kanchipuram rather wasting your 4 years at IIIT Basar. This is because IIIT Kanchipuram provides the revised and updated syllabus also with hardware and lab facilities at its recent version. Faculties are passionate and dedicated towards the betterment for the students and are hard working and serious. Placement in this premier institute is average but the good figures will increase in the upcoming years. See if you want to learn more and develop better, then IIIT Basar is perhaps not a suitable choice.

Hope, this answer clears your doubt.

254 Views

which is better, ece at iiit kancheepuram or production/ metallurgical at nits?plz tell me.

NILUTPOL Student Expert 10th Oct, 2020
Hello,
If you are getting Ece, then you should definitely go for it. IIIT Kanchipuram was established in 2007 and it has very well established facilities. It's faculties are very good and most of them are IIT graduates. They are very knowledgeable.
Also, IIIT Kanchipuram

Production engineering and mettalurgy engineering are also good at the NITs. But they don't have as much scope as ECE.
Depending on your interest, you can go for whichever you want but ECE would be much better choice than mettalurgy and production engineering.

Please visit this link for more details about ECE at IIIT Kanchipuram BTech ECE

Hope it helps
121 Views

I want to join in iiit kancheepuram what would be my total fee for 4 years as I belong to obc ncl and my annual income is less than 1lakh

Nikhitha Sai 10th Oct, 2020

Hello Student,

IIIT Kanchipuram is one of the top ranked universities in the country. And since it is a government funded institution the fees is relatively on the lower side when compared to the other private institutions. And if you apply for ews category or some special provisions you might be able to get fee waivers as well depending on the specific criteria fulfillment. But this is not sure since there is no guarantee about this. You can check about further details in our website link given below:

https://www.careers360.com/university/indian-institute-of-information-technology-design-and-manufacturing-kancheepuram


322 Views

There is no option for DUAL DEGREE(ECE) IN IIIT KANCHEEPURAM in JOSAA counceling 2020 WHY??? .IF not how to apply for that course

ritikaprasad.work 9th Oct, 2020

Hey there!

IIIT Kancheepuram does have dual degree courses in the branch of Electronics. They offer B.tech + M.teh is Electronics and communications with specialization VLSI and Communication system design. Although if you aren't getting an option to opt for that in josaa counselling it might be because they aren't taking admission in that course this year but nothing like that has been informed yet so check again and see if you can find the course.

273 Views

ece in iiit kancheepuram or biotechnology in nit warangal or eee in nit puducherry which is better plz give preference order and explain plz

Sai Shreya 9th Oct, 2020

Priorities of colleges which are better are:

Nit Warangal > Iiit kanchipuram > nit puducherry

While in courses it will be ece >eee > biotechnology

But when going with ur specifications and viewing average package,the order will be:

1.iiit kanchipuram ece

2.nit puducherry Eee

3.nit Warangal bt

And it solely depends on your passion for that subject too!

Good luck!

298 Views

which is better iiit kancheepuram mechanical engineering or NIT hamirpur chemical engineering? regarding placements

chandni deb 8th Oct, 2020

Dear Student,

as per most of the reviews given, it is suggested that NIT Hamirpur is better than IIIT Kancheepuram based on various given facts. With regards to placements, NIT Hamirpur has better reviews for placements . Not only are opportunities for placement far more better in NIT Hamirpur as the students there are given more opportunity  but the pay package given is also good. As per records stated the  median package given for a Btech student at NIT Hamirpur is INR 6.78 lakhs.

Then again these reviews are based on students who have their own opinion about the above mentioned colleges. However you can have look at the links given below which will give you a better idea of the colleges.

https://www.careers360.com/university/indian-institute-of-information-technology-design-and-manufacturing-kancheepuram

https://www.careers360.com/university/national-institute-of-technology-hamirpur


193 Views

I had secured a rank o 24360 injee main crl rank. now i had options of it+mba in iiit gwalior and cse+mtech in iiit kancheepuram and cse in iiit guwahati,vadodara and ece in iiit jabalpur anda lso i will get cse in msrit bangolare through comedk. now which will be my best option

Abhishek Roy 7th Oct, 2020

As far as your JEE Main Rank, I believe you should consider options at IIIT Bhubaneshwar, IIIT Sri City and IIIT Vadodara in CSE and IT respectively, whichever is near your home state. Placements at all the three IIITs are comparable and are somewhat at par. However IIIT Sri City has an added advantage of being near Hyderabad, Bangalore and Chennai, the core IT hubs of India.

Although if you have no monetary issues and distance is not a problem, MSRIT CSE seems a more viable and standard option. Bangalore being an IT and Technology hub, will seriously help you in nurturing your ambitions and will provide better career prospects. Secondly Bangalore, will millions of aspirants and students provides a healthy atmosphere for students residing there.

For more information regarding college prediction do follow the link below

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer


69 Views

my ST category rank is 3067, is it good to join dual degree in Iiit kancheepuram?or any best options u do suggest for me!!plz help

NILUTPOL Student Expert 4th Oct, 2020
Hello,
If you get a seat in IIIT Kanchipuram for dual degree, then you can definitely go for it. Dual degree courses are every good. Normal btech is of 4 years and then masters is of another 2 years. In dual degree, students can finish both bachelor's degree and master's in just 5 years.
This is a great boon. After you dual degree, you can go for research areas.
Also IIIT Kanchipuram is very good in terms of placements, education, facilities and faculties. It provides all the facilities in the best form.

You can also ty to further improve you chances of getting other branches and other colleges in the subsequent rounds of counseling. So please go for all the rounds of JOSAA counseling and also the CSAB spot round.

Please visit this link to use the JEE Mains college predictor

Hope it helps
179 Views

mechanical engineering in Iiit jabalpur or dual degree in Iiit kancheepuram?

madhur 4th Oct, 2020
Hello aspirant,

First of all congratulations on securing such a good
Rank.

I would personally prefer to go for a dual degree course from IIITDM kancheepuram as it will be providing both bachelor's and master's degree from one of the most reputable college in India.
To find out list of colleges based on your jee score you can refer the link given below
https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer
Hope this helps.

Regards
Madhur
95 Views

which is better metallurgical engineer in NIT(top10) Vs dual degree in iiit kancheepuram or iiit Gwalior?

Shoaib Akhtar 4th Oct, 2020

hello jagan

as you are comparing colleges ,so don't just rely on a single view and research carefully before taking admissions .for this question ,i think i will chose doing btech from top NITs rather then a dual degree . i believe dual degree will help you more if you want to go into research field . after doing btech you have a lot new options than dual degree. also the placements is comparable between the two .even i think the placement is better in btech .so these are all my personal views and you should search more by yourselves

best wishes

The question have been saved in answer later, you can access it from your profile anytime. Access now