Dear Student,

Both are public/government ownership colleges. NIT JAMSHEDPUR was established in 2002 whereas VNIT was established in 2007.

Campus size of NIT JAMSHEDPUR is 342 (Acres) whereas for VNIT, it is 216 (Acres).

Visvesvaraya National Institute of Technology Nagpur (VNIT Nagpur) has higher rank. VNIT has been ranked 27 by NIRF while NIT JAMSHEDPUR has been ranked 79 by NIRF.

B.Tech. Chemical Engineering in Visvesvaraya National Institute of Technology Nagpur has higher cutoff through JEE Main and has lower fees. JEE Main cutoff for NIT Jamshedpur is 2217 while for VNIT is 601.

Fees for general category in NIT JAMSHEDPUR is  7.16 Lakhs while for VNIT it is 5.38 Lakhs.

During college placements, the median salary for B.Tech. graduates from VNIT is 8.53 Lakhs whereas for B.Tech. graduates from NIT Jamshedpur is 6.80 Lakhs.

Both have similar facilities. According to student reviews on careers360, the ratings given to NIT JAMSHEDPUR is 4.3/5 while for VNIT, it is 4.1/5.

You can choose as per your preference.

Happy Learning!

Hi Aspirant,

Hope you are doing great as per the question asked by you getting N.I.T jamshedpur with AIR 1001 and OBC 391 in N.I.M.C.E.T 2021 is very difficult as your rank is very high as compared to previous year cutoffs and generally in O.B.C category there is only 243 seats so getting any of the N.I.T is      very difficult.

Hope you found this answer useful.Stay motivated stay positive.

All the best!

Hello Aspirant,

As we go through the latest cut-offs of JEE-Main 2020 of JOSAA 6th round then it shows that :-

Closing OBC rank for NIT Jamshedpur was :-

• Metallurgical and Materials Engineering branch - 13823 (Other state quota)

So you have quite good chances to get NIT Jamshedpur with branches like :-

• Metallurgical and Materials Engineering
• Mechanical Engineering
• Electronics and Communication Engineering
• Electrical Engineering
• Computer Science and Engineering

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your marks, category, and state you can use JEE-Main College Predictor:-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

If you are preparing for JEE-Main 2021 or 2022 then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main 2021 or 2022 :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

You can also check out the JEE-Main 2021 qualifying cut-off (expected) for JEE-Advance 2021 from the link given below :-

https://engineering.careers360.com/articles/jee-main-cutoff

I hope this information helps you.

Good Luck!!

Hi Vivek!

Both colleges provide good infrastructure facilities such as smart classrooms, well-equipped labs, sports ground, internet facilities etc. Also, as both are government colleges so there are no high charges for fee. The faculty members are highly skilled and knowledgeable in their subjects.

Coming to the placements, NITs and IIITs both are considered among top colleges of India, so definitely there are plethora of placement opportunities with good packages. But, as you have choice between metallurgy and CSE, I would suggest you to go for CSE as this branch is highly popular and demanded. Moreover, CSE has good scope in future and almost all the companies are turning toward digitalization.

Hope it helps to clear your dilemma, Choose Wisely!

Thankyou!

See both the institutes are very good. Now you have to choose among this two based on your interest in the course. If you are interested in CSE go for NIT PATNA and if you are interested in ECE then go for NIT JAMSEDHPUR.

Now if you are asking this question from a placement perspective point then I would recommend you that you should go for NIT JAMSEDHPUR. The average packages of NIT J is better than NIT P. But apart from this there are no such big difference between these two institutes.

To know more about NIT P visit the link below:

https://www.careers360.com/university/national-institute-of-technology-patna

To know more about NIT J visit the link below:

https://www.careers360.com/university/national-institute-of-technology-jamshedpur

I hope this answer helps. All the very best for your future endeavors!

Dear Student,

No, he can't sit in the placement drive of the CS, they ask only CSE and IT to sit in their campus round and somewhere ECE also but not the metallurgy student.

To get the placement or post like CSE students you need to some into the field of programming, learn any language, make various projects, and every IT stuff you need to do and understand then you will be able to grab the post of any IT company and you need to choose the off campus placement method because in college they will not allow you but in outside you can join any company you want you have the required skill.

Good Luck :)

hello purnima

hope you are doing fine and great. As per your query, I would glad to know you that in my opinion NIT nagpur would be a very good option for persuing mtech. NIT nagpur holds 27th rank in nirf ranking . Morever, It has very good alumi network and brand name with a high class faculties at doctorate level . Placement scenario is also very decent , more thna 80 percent student get placed with an average package of 3.3 lakhs

Hope you found this answer helpful. Good luck for your future

Dear Aspirant,

See IIT Patna has higher ranking.

Median Salary of IIT Patna is 14 lakhs.

Median Salary of NIT Jamshedpur is 6.80 lakhs.

FEES-

IIT Patna :8.45 Lakhs

NIT Jamshedpur :7.16 Lakhs

Find more about these two here:

https://www.careers360.com/university/indian-institute-of-technology-patna/btech-metallurgical-and-materials-engineering-course

https://www.careers360.com/university/national-institute-of-technology-jamshedpur/btech-metallurgical-and-material-engineering-hons-course

Find a detailed comparison between these two here:

https://www.careers360.com/compare-colleges?college=107-146-course=268816-7833

Hello Aspirant,

If we go through the analysis of marks Vs Percentile Vs rank for JEE-Main 2020 then according to the percentile mentioned by you in the question your CRL rank is expected to be in the range of 24552 - 27600 , you can check out marks Vs ranks Vs Percentile from the link given below :-

https://engineering.careers360.com/articles/jee-main-marks-vs-percentile

Or

You can also use JEE-Main Rank Predictor to predict your rank :-

https://engineering.careers360.com/jee-main-rank-predictor

As we go through the latest cut-offs of JEE-Main 2020 of JOSAA 6th round then it shows that :-

Closing CRL rank for NIT Jamshedpur was :-

• Production and Industrial Engineering  branch - 49450 (Home state quota)
• Metallurgical and Materials Engineering  branch - 42481 (Other state quota) .

So you have quite good chances to get NIT Jamshedpur either under Home state quota or even under other state quota.

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your marks, category, and state you can use JEE-Main College Predictor:-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

Now if we talk about NIT Jamshedpur's placement scenario then it is quite good and companies have offered attractive placements to the candidates of NIT Jamshedpur and it is not al all under-rated because it is known to be under top 10 NITs in common interest. If you are going only with the placement motive then you would face some difficulties because before placement you have to learn different skills, what NIT will offer you is just a training and assistance regarding placements and you yourself have to develop skills in you so that company should see some talent in you.

I hope this information helps you.

Good Luck!!

Hello Aspirant,

If we go through the analysis of marks Vs Percentile Vs rank for JEE-Main 2020 then according to the percentile mentioned by you in the question your CRL rank is expected to be in the range of 61380 - 69000 , you can check out marks Vs ranks Vs Percentile from the link given below :-

https://engineering.careers360.com/articles/jee-main-marks-vs-percentile

Or

You can also use JEE-Main Rank Predictor to predict your rank :-

https://engineering.careers360.com/jee-main-rank-predictor

As we go through the latest cut-offs of JEE-Main 2020 of JOSAA 6th round then it shows that :-

Closing OBC rank for NIT Jamshedpur under Female quota was :-

• Computer Science Engineering branch - 6868 (Home state quota)

And your OBC rank is expected to be around 15000-17000 .

So you have very low or almost no chances to get NIT Jamshedpur with CSE branch even if you have Home state and Female quota.

But yes if you improve your percentile in any further session of JEE-Main like around 97+ then you might have a shot at CSE in NIT Jamshedpur .

You can check out the latest cut-offs from the link given below :-

https://josaa.nic.in/Result/Result/currentorcr.aspx

Note that the above prediction is made on the basis of latest cut-offs available on official website of JOSAA or CSAB and the cut-offs are bound to change every year depending upon various factors such as the number of candidates appearing in an examination, the number of candidates qualifying an examination, difficulty level of the paper, and so on.

To have a list of all those colleges which you can get based upon your marks, category, and state you can use JEE-Main College Predictor:-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

If you are preparing for JEE-Main 2021 or 2022 then I would recommend you to check the resources made by our experts to help aspirants like you in the best and smart preparation of JEE-Main 2021 or 2022 :-

https://learn.careers360.com/jee-main-coaching/?utm_source=%20QnA

You can also check out the JEE-Main 2021 qualifying cut-off (expected) for JEE-Advance 2021 from the link given below :-

https://engineering.careers360.com/articles/jee-main-cutoff

I hope this information helps you.

Good Luck!!