Hello aspirant,

Yes, you can pursue MTech after BE or MSc , but in order to be eligible you need to crack the entrance exam.

You can give GATE exam to get M.Tech admission in various Top Engineering colleges like NIT or IIT. You can also take any private engineering college and can take M.tech admission in plastic engineering.

GATE is the most common entrance exam which the candidates pursue to get into the MTech colleges of India. Candidates need to apply at the official website of the conducting authority of the GATE exam.

Further, below are the list of top colleges in india for M.tech in Plastice engineering :

• LDCE Ahmedabad - LD College of Engineering. ...
• ICT Mumbai - Institute of Chemical Technology. ...
• HBTU Kanpur - Harcourt Butler Technical University. ...
• Government Polytechnic, Nashik. ...
• Government Polytechnic, Lucknow. ...
• IERT Allahabad - Institute of Engineering and Rural Technology.

Further, if you wish to know more about the M.tech in Plastic Engineering course, you can follow the below mentioned link to know more : https://engineering.careers360.com/colleges/list-of-me-mtech-in-plastic-engineering-colleges-in-india

I hope that this will help.

Hi,

Both the Plastic Engineering and Plastic Technology involve the study of some kind of polymers. Even though they deal with the same theme, the two fields are dissimilar in many aspects. Polymer Engineering is the engineering field which applies the hypothesis and knowledge in chemical engineering that is involved in the manufacturing and use of polymers. Plastic Technology is a particular branch which involves the study of chemicals that exhibit plasticity and its uses.

Polymer Engineering Course and Career opportunities :-

Polymer engineering is a specialization in engineering field which utilizes the hypothesis and knowledge in chemical engineering to find solutions to several problems that involves the manufacturing and use of polymers. At the present scenario, the use of polymers has been gradually increased. The demand for experts in this field is also high.

Polymer engineers are those who specialize in this field and use the principles of various technologies to produce new products. They use plant blueprints, thermodynamics, process design and transport phenomena to develop these new products. They also manage the manufacturing process of plastics and many other polymers. It is under their administration the plastic technicians and moulders perform the shop floor production processes. Since the polymer production has increased in many countries, the professionals working is this area have also increased gradually.

Plastic Technology Course and Career opportunities :-

Plastics are the most commonly used chemical compound in human life. They are used tremendously for the production of usual as well as specific products. Plastic technology is a specialized branch of study which includes the study of diverse types of chemicals that exhibits plasticity. It also involves the study of several methods in which plastics can be utilized for use in human life. The field is also concerned with the research works to produce plastics eco friendly. Plastic is peculiar kind of synthetic or artificial polymer and is similar to natural resins in many aspects. These materials are used in a wide variety of applications due to its unique capability of providing diverse features that benefits the consumers. Because of its exclusive properties, the plastics are used in many different areas like for packaging, containers, automobile parts, plastic industries, etc. One can enter in this field profession after pursuing the study in plastic technology.

Key differentiators between Polymer Engineering and Plastic Technology :-

• Plastic engineering is a specialization in engineering field which applies the knowledge in chemical engineering to produce and use different kinds of polymers whereas Plastic technology is the peculiar field which involves the study of chemicals that exhibit plasticity and its uses.
• The polymer engineers are the professionals who use the principles involved in the technology to manufacture kinds of polymers whereas experts in plastic technology are also concerned with the research work to make plastic eco friendly apart from production of new plastic products.
• Although the plastic engineering and plastic technology involves the production and use of polymers, there are lots of dissimilarities between them.

Hope this helps.

Hi, hope you are doing well.

In order to do M.Tech in Plastic Engineering, you must qualify in either of these courses: B.E./B.Tech./B.Sc., Engineering (4 years) in Mechanical / Chemical / Production / Polymer / Plastics Engineering / Technology (or) M.Sc. in Polymer Science / Chemistry with Polymer specialization with minimum marks of 60 per cent.

ICT ( Institute of Chemical Technology), Mumbai is a very good college for this course.

For further information on colleges, you may refer to this link:

https://engineering.careers360.com/colleges/list-of-plastic-engineering-colleges-in-mumbai

https://engineering.careers360.com/colleges/list-of-me-mtech-in-plastic-engineering-colleges-in-india

M.Tech in Plastic Engineering is a 2 years course.

Hope this helps.

Best wishes

Dear Babuli,

Yes, definitely you can pursue M.tech chemical engineering or M.tech Biotechnology after Msc. Chemistry. Also, it depends  and varies from University to university too as every University has its set if rules and regulations. It will better if you choose the college or university you wanna puruse M.tech and go through their policies. Also, you can enquire by contacting them online or by visiting the campus. Feel free to drop such queries related to this or else. We are always ready to help you.

Hope this resolved your query.

All the Best!!

Dear student,

For this, you can check the official website of your respective college. You will find the previous year question papers there. Now, as you have not mentioned your college name, so we are unable to help you.

You can also ask from your seniors, regarding the previous year question papers.

Hope it helps.

Hello,

You asked for diploma un cipet. Here is a short review of this college:

CIPET highly recommended if one have passion to learn something new. Full Freedom will be granted to learn anything if you are very curious to learn.Freedom is the main constraint which you will not get even in premier institutes.

The outer world will give you more preference in jobs and respect in the  groups if you represent yourself as CIPETIAN.

Reliance Industries Limited, is the only company which used to offer the highest pay in the placements.

Many medium and small scale industries also visit for placements.

Average salary is around Rs.15,000 per month to Rs.20,000 per month.

All the best  !!

Hello Priyanshu

Let us  first simply center around the center plastic assembling plant work. A plastic specialist is associated with stages like plan, preparing and assembling of plastic materials and items. At times, they are even engaged with showcasing of these items.A typical plastic engineer spends most of his/her time supervising or taking part in the design, manufacturing and processing phases. Some of the common job profiles available in front of plastic engineers include-

• Design Specialist
• Quality Control Engineer
• Plant Supervisor
• Plant Manager
• Marketer

Firms engaged with creation, handling and plan of plastic items and materials are the prime scouts. Polymer handling and creation units are additionally known to enlist them. Since plastic materials are likewise utilized in drug area, plastic designers may get a new line of work in this area as well.

Labs and examination firms engaged with research take a shot at (plastic materials and applicable manufactured materials) are likewise known to enlist plastic architects. Processing plants, oil and petroleum gas firms and petrochemical organizations enlist them. ONGC, OIL, Government treatment facilities and so forth are a portion of the notable Government area enrollment specialists

hope this helps you

Hello

top college providing Masters in plastic engineering are listed below:-

*Institute of Chemical Technology, Mumbai

*Central Institute of Plastics Engineering and Technology, Chennai

*Central Institute of Plastics Engineering and Technology, Lucknow

*Central Institute of Plastics Engineering and Technology, Ahmedabad

*Central Institute of Plastics Engineering and Technology, Bhubaneswar

*Central Institute of Plastics Engineering and Technology, Hajipur

* Plastindia International University, Vapi

For detailed information visit our page the link for the same is given below

https://engineering.careers360.com/colleges/list-of-me-mtech-in-plastic-engineering-colleges-in-india

Thank you