All Questions

Instrumentation Engineering

Follow
Showing 101 - 110 out of 448 Questions
81 Views

detail about instrumentation technology in au

Neha 24th Oct, 2020

Dear candidate,

Andhra University is one of the best Universities in South India. In terms of fees ,placement and the courses they offer , it have always been good. I am providing here details for instrumentational technology course in Au.

Fees :- The fees for this course is Rs 40000/- for a duration of 4 years.It is quite well as it is not so much costly like private institutions.

Infrastructure :- All classrooms are well maintained. Wifi facility is also fine. Moreover new building has recently been build for intrumentation technology branch which quite good. Although hostel facilities are not quite good and mess foods also. So you can prefer going for PG or outside campus living.

Placements:- I have heard that placements are mostly for IT companies. So whichever field you study in the end probably you get placed in software company if you have relevant knowledge. But this is not the only case in AU. Here you can get internship opportunites in good companies like BHEL very easily. Also companies like Wipro,Infosys,NCR etc comes and offer students the different positions mostly a software eng. The highest package is around 7 lakhs in this course and average comes around 4 lakhs.

Faculty :- Professors here are highly educated. They are very knowledgeable. They provide best teaching and test your knowledge through mid semester and end semester exams. Also weekly test can be taken.

Overall I will say that AU is good for instrumentation technology but if you want a good living then probably go for PG and others .Also you should be satisfied with the package of 3-6 lakhs if you want admission in Au.

I am attaching a link you may check for more details.

https://www.careers360.com/colleges/andhra-university-college-of-engineering-visakhapatnam/btech-instrumentation-technology-course

Hope this helps.

56 Views

sir, I am planning to start my preparation for GATE22 now. Iam pursuing instrumentation engineering and aiming to get into psus. Could yu tell me where i have to start and details about getting into psu company

Vinay Kumar 9th Sep, 2020

Hello aspirant,

Most of the PSU's now recruit graduate trainees through GATE examination. The one's that don't either conduct their own test or recruit from colleges directly.

The one's that recruit through GATE, shortlist the candidates based on their respective GATE scores and dispatch the call letters in the month of June.

Results are generally declared in the month of August but can get delayed sometimes if company decides to change the vacancies. Post declaration of results , selected candidates are called for medical examination. Few PSU's namely BHEL, HPCL, ONGC, RITES also declare a list of candidates in waiting which is a good step.

Prepare with full potential.

All the best.

Hope you found this helpful

117 Views

galgotia college of engineering and technology with Electronics and Instrumentation engineering OR G.L Bajaj Noida with ECE , Which one I prefer ?

Jainshahajal 18th Oct, 2020

Hello Aspirant,

It is tough to say which is best. Both college have very good placement records and both have giving same package.
But if you want school type feeling and you don't want to enjoy your college life they you can go with GL Bajaj. They have very unwanted rules they doesn't give you freedom. They don't have good college fest or freshers party..

But if you a guys want to enjoy your college life with study then Galgotias is best. Here you have all freedoms to enjoy and they have very very good college fest or freshers party and one more important thing they have so many extra curricular activities which is help to polish your self..

But both GL Bajaj and Galgotias were very strict rules when coming today attendance.. you have to maintain 75% attendance.

So over all I think Galgotias with Electronics and Instrumentation is best.

189 Views

I secured a general rank of 1828 and OBC rank 471 . I should join Electronic and instrumentation engineering or electrical or mechanical or civil in IET LUCKNOW yaa I should join CS in KNIT SULTANPUR????????

apeksha150598 18th Oct, 2020
Hi,

I would recommend you to go for CSE branch in IET Lucknow. You can get any branch in IET, Lucknow.
Previous year's cutoff for CSE (obc) : 357-495

This year 72 companies visited the campus. Highest package offered was 14 LPA and average package was 7 LPA. Top recruiting companies are Adobe, TCS, Tata Motors, ICICI Bank, L&T, syntel, Cognizant and many more. Placement opportunities are very high in CSE in IET, Lucknow.

For more information you can visit the following link:
https://www.careers360.com/colleges/institute-of-engineering-and-technology-lucknow

Best of luck!
81 Views

my rank in uptu is general 1828 OBC 471 . i shoul join Electronic and instrumentation engineering or civil or mechanical or electrical or whether I should join CS in knit sultanpur???

ARYAN SAGAR 18th Oct, 2020
Dear student,

First of all congratulations that you have secured 1828 general merit rank in UPSEE exam. Now your rank is very good and definitely you can get many good colleges including IET Lucknow and knit Sultanpur.
Now as per seeing the last year cutoff closing rank for KNIT Sultanpur then there is no chance that you can get Computer Science Engineering in KNIT Sultanpur. But apart from computer science engineering you can definitely get many other good branches as you have mentioned like electrical or mechanical or civil engineering.
All these branches are very good in KNIT Sultanpur. But if you are specifically asking then according to me you must go with electrical engineering branch in KNIT Sultanpur.

Also click the following link to know more about the cutoff closing rank for KNIT Sultanpur :-
https://www.careers360.com/colleges/kamla-nehru-institute-of-technology-sultanpur/cut-off?college_id=4036&exam_sub_exam_id=2330&counselling_id=4201&category_of_admission_id=3&caste_id=2&gender_id=1

Also check out our upsee college predictor tool to get an appropriate idea of colleges that you can get on basis of your upsee rank :-
https://www.careers360.com/upsee-college-predictor
224 Views

How are the placements for BE Instrumentation and Control Engineering in PSG Tech ? What is the highest salary package for this department student in IT field ?

gauravvijayvargiya399 18th Oct, 2020

Hello Aspirant,

At the PSG College of Technology , Coimbatore lover placement offers are good . Almost 75- 85 % of students were placed during the academic year of 2019. The placements are coordinated by the placement cell of the college which conducts training sessions for the students to increase their technical and non-technical skills.

Companies like Accenture, Birla, Ashok Leyland, Adobe, Cognizant, Nuvo, Samsung, L& T, Capgemini, amongst other companies. The placements offers increase each year.

In the 2019 placement offers, about 55 - 65% of BE Instrumentation and Control engineering students were placed.

Since , there were good IT companies that visited, therefore,  placement offers for IT offers were good enough.

The average salary was approx. 4 to 5 lakhs per annum and the highest was around 8 to 9 LPA

You can refer to the article given below for more information and details,

https://www.careers360.com/colleges/psg-college-of-technology-coimbatore/placement

Hope that helps. Good luck


203 Views

Which is better electronic and instrumentation engineering at haldia institute of technology,techno main saltlake or meghnad institute of technology.how is the placement.

samarpit das 14th Oct, 2020

Before I start answering I want to inform you that MSIT does not have B.Tech/B.E course for electronics and instrumentation,if we are to compare HIT and Meghnad Institute of Technology,personally I would suggest you Haldia Institute of Technolgy as the said branch is more developed in HIT,although both colleges are equivalent from other perspective.Although placement is a bit better in techno main salt lake.But I personally believe it is your knowledge that will take you places and quality of education is better at HIT.

However, you can use the below link to make a comparision

https://www.careers360.com/compare-colleges

Hope you get the best!

Reagards




316 Views

What are the scopes of Electronic and instrumentation engineering?

Aman Kumar 2nd Sep, 2020

Hello aspirant!!

Today, we find instruments at home and at workplace, and this was possible only because of the science Instrumentation. Since instrumentation being the order of the day, it is very much necessary for the young minds to get accustomed with the latest developments in instrumentation field. Moreover Instrumentation being one of the most important sought branches in Industrial point of view, a combination of Electronics and Instrumentation would fetch high dividends for the students who take up Electronics and Instrumentation Engineering as their career course.

This is a multi-disciplinary stream and covers subjects from various branches such as chemical, mechanical, electrical, electronics, biomedical and computers. This helps in making a switch to other disciplines, if anyone wishes to after completion of the Course. Instrumentation engineering is a specialised branch and it deals with measurement, control and automation of processes.

Nowadays, almost all industries are automated.Automation being one of the latest trend in all Industries, is therefore highly in need for expertise in the field of Electronics and Instrumentation to achieve their requirements. Automation is the core job of instrumentation engineers. As the trend of automation picks up in India and abroad, Instrumentation and Control Engineers are finding more and more job opportunities. Right from R&D units to aerospace companies, pharmaceuticals, food industries, thermal power plants, steel plants, fertiliser plants, automobile companies, biomedical companies, refineries and cement plants, these engineers find job opportunities in almost all domains of the world.

Control and Optimization is another important criterion in many Industries. Electronics and Instrumentation engineers having good exposure in these areas will be highly effective in solving various critical needs of the Industries.

An instrumentation engineer is responsible for designing, developing, installing, managing and maintaining equipments which are used to monitor and control engineering systems, machinery and processes.

Job Oppurtunities

Electronics and Instrumentation Engineers have a bright future ahead of them as they are needed by almost all Industries in various cadres like Design, Development, Automation, Control, Fabrication, Inspection, Quality control, Maintenance and Service and so on. Graduates from instrumentation and control programs can expect to fill positions such as:

  1. Instrument Engineer
  2. Automation Engineer
  3. Control Engineer
  4. Instrumentation Technologists or Technician
  5. Instrument Mechanic
  6. Control Systems Technologist
  7. Process Analyzer

Salaries in the field varies depending on the position, but the average starting salary is between Rs.8,00,000 and Rs.25,00,000 a year, and can increase to Rs.35,00,000 to Rs. 45,00,000 with experience.

An Instrumentation engineer has opportunities in many central government organisations like DRDO, ISRO,IOC, BARC, NTPC, Railways, BSNL, HAL, AAI, etc. Also many core companies like Honeywell, Texas Instruments, National Instruments, ABB, Larsen & Tourbo, Robert Bosch, Invensys, GE, Suzlon, Apna Technologies, Whirlybird, ESSAR, Yokogawa, Orange, LG, SAMSUNG, SONY, SANSUI, Whirlpool, Intel, Vedanta, Oil & Coal, Cadence, Cairn India, Linde, Allan Bradley, many software companies like TCS, Infosys, Wipro, CTS, HCL etc recruit these engineers.

Hope this was helpful.

145 Views

What is the scope of Electronics and instrumentation engineering?

praava.lika2000 1st Sep, 2020
Hello Aspirant,
Instrumentation Engineering is a specialized branch of electrical and electronics engineering and it deals with measurement, control and automation of processes. The scope of this particular Applied Electronics and Instrumentation branch is vast and it bridges almost all the branches of engineering.
Scope and Career Opportunities: Nature of work of an instrumentation engineer ranges from designing, developing, installing, managing equipments that are used to monitor and control machinery. ... Tech- electronics and instrumentation, a few name it as B. Tech - control and instrumentation.
Hope it helps ...All the best!!!
73 Views

i have done applied electronics instrumentation engineering in diploma ... ....is manipal University provide chance to join through lateral entry in applied electronics instrumentation engineering

ginnisachdeva02_9364270 Student Expert 10th Oct, 2020

Hey!

yes, Manipal university offers lateral entry in all the b.tech programs and you must qualify the elegibility critera which is:

  • you must have passed 3 years diploma with atleast 54% or
  • must have passed bsc degree with 45% in 12th with maths.

Also, you neet to attempt MET (entrance exam) and on the basis of score admission in taken. To know more, kindly visit at:

https://manipal.edu/mu/admission/indian-students/lateral-entry.html

Thankyou

The question have been saved in answer later, you can access it from your profile anytime. Access now

Download the Careers360 App on your Android phone

Regular exam updates, QnA, Predictors, College Applications & E-books now on your Mobile

Careers360 App
150M+ Students
30,000+ Colleges
500+ Exams
1500+ E-books