All Questions

National Institute of Technology Rourkela

Follow
Showing 231 - 240 out of 741 Questions
54 Views

based on reservations Im getting nit rourkela and calicut CSE branch.so what can I choose?please select based on atmosphere and study.

Shreya sharma 3rd Oct, 2020

Hello ,

Hope you're doing well.

Both of these institutions are highly prestigious ones. However, i will tell you some basic differences among these too.

NIT Rourkela has a higher rank by NIRF when compared to NIT calicut. However, NIT calicut has a lower fees. NIT Rourkela has a median salary for btech students of 6.5 LPA whereas for NIT calicut, it is 8.05 LPA, which is a huge difference. You may follow the link provided below for further comparison:

https://www.careers360.com/compare-colleges?college=141-151-course=7542-8071

49 Views

Based on reservation ranks Im getting Nit rourkela and nit calicut in 2020. so what can I choose ? please select based on both atmosphere and study.

rehan18alam Student Expert 3rd Oct, 2020

Dear Aspirant,

The first criteria for choosing any of these NITs, is the branch you get in these NITs. For example if you're getting a core/top branch in one and some average branch in other then you must go with the good branch.

Some good branches are:-

  • Computer Science
  • Electrical
  • Electronics
  • IT
  • Communication

Hope this helps Thank you.

96 Views

what is best industrial designing in nit rourkela or ece in bit mesra?

Aadarsh Gupta 3rd Oct, 2020

Hello Aspirant,

According to my opinion I would suggest you ece in bit Mesra.

As college is only 4 years partner but branch is lifetime.

Although bit Mesra is also good college and ECE branch is also very good and remanded.

About placement:

Almost 90% of student’s of ECE got placed in Reputed Companies like INFINEON(12 LAKHS PER ANNUM), Robert Bosch Engineering and Business Solutions(5 Lakhs Per Annum), Bosch Home Appliances Group(5 Lakhs per Annum), HPE(5 LPA), Trident Group(15 LPA), Think and Learn(9 LPA), Amazon, Wipro Alight Solutions, Sagacious IP, Cognizant, Cap-Gemini, Extra Marks Private Limiteds..

Get some information about college from this link.

https://www.careers360.com/university/birla-institute-of-technology-mesra

Finally choice is yours.

Choose twicely.

All the best for your future.

62 Views

my rank is 4739 ST female catagory in which branch I will get in nit rourkela Ive also state quota

Anurag Khanna 30th Sep, 2020

Hello Aspirant,

According to the category rank you have mentioned in the question you have no chances of getting in to NIT Rourkela as per previous year's cut-off even after considering your Home state quota. As cut-offs for this year is not declared yet so we can guide you on the basis of previous year's cut-offs.

For complete details about previous year's cut-offs refer the link given below :-

https://engineering.careers360.com/articles/jee-main-cutoff-for-nit-rourkela

Note that the cut-offs are bound to change every year depending upon various factors, so to get an idea we can use last year's cut-offs.

However I would recommend you to use JEE-Main College Predictor to predict the chances of your admission in different colleges  based upon your percentile and category :-

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

I hope this information helps you.

Good Luck!!

276 Views

how about industrial design in nit rourkela? can i get good placement packages in industrial designing compared to other branches?

Karam Vir 29th Sep, 2020

Hi,

National Institute of Technology, Rourkela offers a four years undergraduate course in Industrial Designing.

As the placement opportunities, there are few companies which offers placements for Industrial Designing. However, if have good command over Ui/UX design, you will be in a better position to get the job in Thermal, Honda etc. (4-6) lpa.

It is still not treated as the core subject in India which results in less opportunities for placements. However, NIT Roukela is the best place to pursue this course. After completion, you can go for higher studies in abroad or perform  internships to improve the chance of getting good jobs.

Regards




174 Views

is industrial designing or chemical engineering at nit rourkela better or mechanical or electronics and communication engineering at bit mesra better?

Shreya shrestha 28th Sep, 2020

Hello there,

It doesn't really matter which college you're from as long as your engineering fundamentals are clear. I will agree that being IITians or an NITian does give you that initial boost. NIT Rourkela is one of the best college. Placement in chemical engineering is really good out of 65 students approximately 55 students got placed. And as per for BIT Mesra is also same in case of CSE and IT. But I think that mechanical engineering in BIT Mesra don't have much placement . So you should go with NIT Rourkela.

P.S.- It depends on your interest that which branch you want to take. Because you have to give 4years in that branch so you should choose according to your interest because knowledge will help you get a placements.

Good luck!!

63 Views

can I get metallurgy branch in special round csab councilling, in top 10 nits with 35k OBCNCL rank? Because last time 107 seats vacant in nit rourkela, so can I get them?? I only need any nit with even poor branch according to my rank.

AMIT KUMAR VERMA 26th Sep, 2020

Hii,

According to previous year cutoff of various Nits you are not eligible to get any branch in any Nit college. Your abc rank i.e. around 35k is not enough to any seat in any Nit in csab counseling. Nits are prestigious institutes of India which requires good rank holder.

Here I provide you jee main college predictor tool which definitely help you.

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

Thanks.

274 Views

how many seats are vacant in nit rourkela in 2019 and in which branches?

Kritika 24th Sep, 2020

Hello Aspirant,

Different bracnches had different cutoffs,it depends on your rank and category to which you belong.For complete cutoff details ,do check the link below,it has complete information on NIT Rourkela marks and cutoffs:

https://engineering.careers360.com/articles/nit-rourkela-seat-matrix

Hope it helps

65 Views

how many marks should I get site in nit rourkela obc category from other state

theeanonymous 24th Sep, 2020

Hello Saidinesh,

The JEE cut off 2020 is decided in the basis of the difficulty level of the exam,previous year cutoff trends, number of seats available at NIT Rourkela and number of candidates who appeared for the exam.Hence it is always difficult to predict the exact possibilities. Chances may also vary with the branch your choosing. Based on previous year trend the cut-off rank for CSE branch for OCB category male under other state quota was 1181 , for ECE - 1788 , mechanical - 3591, electrical - 3459 , civil -5570.Hence,you may have to get minimum above 160 for a decent branch.

You may see the marks for the particular rank range using this article:

https://engineering.careers360.com/articles/jee-main-marks-vs-percentile

However you may visit the article below to know cut-offs for other branches and other details:

https://engineering.careers360.com/articles/jee-main-cutoff-for-nit-rourkela

You may also use the college predictor tool to know your chances:

https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer

Hope it helps.

414 Views

NIT SURATHKAL ECE vs NIT ROURKELA ECE which is best

Shivani sunil kakde 24th Sep, 2020

Dear Aspirant,

NIT Surathkal ranks 3rd in placement by NASSCOM and also ranks 2nd by NIRF since last two years.It ranks 13th in the list of top engineering colleges in India.It provides a much needed skills that is hands on experience which helps the students of ECE to work on circuits and machines.NIT Surathkal offers many B.Tech course out of which ECE is one in which 92 seats are available.Placement of ECE branch in NIT surathkal is very good.Companies such as Lupn,Mahindra and mahindra,Samsung,TATA,Siemens,Microsoft,Mercedes benz,Toyota,Wipro etc visit the campus every year.

For ECE the minimum salary offered was Rs 3.3 lakhs per annum.The average salary was Rs 8.19 lakhs per annum and the highest salary was Rs 16 Lakhs per annum.All these figures suggest that NIT Suratkhal has good placement record.

whereas,ECE branch in NIT Rourkela is very good nowadays it is almost second choice after CSE.The placement record of the branch is very goodThe top companies which recruit students from ECE branch are qualcomm,tata,sap labs,microsoft ,oyo,scheidner etc.Almost all the students gets job and 70% students get internship.

So both the NIT's ECE branch is good with excellent teaching staff and placement.Now it depends on your interest in which city and area you are interested in.

Thank you

The question have been saved in answer later, you can access it from your profile anytime. Access now