Mechanical Engineering
See MANIT offers admission on the basis JEE Main for UG courses. SO if you wish to take admission in MANIT then you need to participate in the counselling session of JEE MAINS and if you are sure then give it as the first preference, you will get the seat alloted there. But you need to participate for the counselling or else you won't get alloted the seat.
To know more about the MANIT visit the link below:
https://www.careers360.com/university/maulana-azad-national-institute-of-technology-bhopal
To know more about JEE MAINS 2021 counselling visit the link below:
https://engineering.careers360.com/articles/jee-main-counselling
I hope this answer helps. All the very best for your future endeavors!
Hi
Your profile suggests that your home state is AP
It's quite difficult to predict because cutoff keeps changing every year depending upon various factors like :-
******number of students that appeared in the jee main exam,
****** number of available seats,
****** performance of different students in the examination,
****** the category you belong etc.
But yes,
When we go through previous year trend then
>>>>> With 35100 obc rank
You have low chance in nit srinagar for branches asked by you or any branch
For example,
In 6th round of josaa counselling 2020, under other state closing rank was 16005 obc rank in NIT Srinagar and it was for Metallurgical and Materials Engineering (4 Years, Bachelor of Technology)
You can check the same at
https://josaa.nic.in/Result/Result/currentorcr.aspx
This prediction is on the past year data basis but cut closing rank for colleges changes every year depending upon factors like number of candidates that write jee main examination, difficulty level of the question paper for different shifts of jee main etc so
To have a personalised report on your chances of getting a college you can go through our college predictor, it will give you complete list of colleges which you can get on the basis of the category you belong to, your home state, your gender etc, the link for jee main college predictor is provided below
https://engineering.careers360.com/jee-main-college-predictor?icn=QnA&ici=qna_answer
To help you further,
Minimum percentile in jee main 2021 to qualify it to be eligible for jee advanced 2021 is given below :-
--------) general :-87.8992241 percentile
--------) EWS:- 66.2214845 percentile
--------) OBC-NCL :- 68.0234447 percentile
--------) SC :- 46.8825338 percentile
--------) ST:- 34.6728999 percentile
--------) PH :- 0.0096375 percentile
Thank you
Hello Roman ,
Yes...You may have a chance to get a seat and Both electrical and mechanical branches are good.
To get admission in DTU or NSUT you need to register for JAC DELHI counseling.
DTU delhi last round cut off 2020
Gender = Gender-neutral
Quota = Home state (HS)
Category = OBC
Branches opening rank closing rank
1. Electrical engineering
(OBC) - 151046 204123
2. Electronics and communication engineering
(OBC) - 103129 114020
3. Mechanical Engineering
(OBC) - 120811 194826
You can check the cut off of the remaining branches of last year 2020 through the following link of the pdf.....
https://drive.google.com/file/d/1vandC_b-11PTzEvP2EQ7nFMVw8wah5zU/view?usp=drivesdk
Also you can predict colleges according to your JEE MAINS paper 1 score, category and state through the following link....
https://engineering.careers360.com/jee-main-college-predictor?utm_source=qna&utm_medium=jee_cp
Hope this helps you
All the best for your Future !
Hello prabal,
Shri Govindram Seksaria Institute of Technology and Science (SGSITS). The admission to the BE/BTech programme is made through JEE Main (https://www.shiksha.com/b-tech/jee-main-exam) . After the declaration of the result, SGSITS cutoff is prepared to shortlist the applicants for admission. ://www.careers360.com/colleges/shri-govindram-seksaria-institute-of-technology-and-science-indore/cut-off
You can check the your chances of getting admission bases on your result and cut-off by the above provided link.
thank you and wish you luck.
Hello Mahesh Karri,
On the basis of your rank and caste category mentioned you might not get any seat in Raghu Engineering College, Visakhapatnam for B.Tech Mechanical Engineering as per last year's cut-off state rank which was 54449.
Although, you have a good chance to get seat in these colleges for B.Tech Mechanical Engineering as per previous year's record -
• Sri Venkateswara College of Engineering and Technology, Etcherla
• Sree Vahini Institute of Science and Technology, Tiruvuru
• Satya Institute of Technology and Management, Vizianagaram
• Gonna Institute of Information Technology and Sciences, Visakhapatnam
• Sri Venkateswara Institute of Technology, Anantapur
• Bapatla Engineering College, Bapatla and many more.
Further you can also use this College Predictor tool to know your admission possibilities in B.Tech Mechanical Engineering -
https://www.careers360.com/ap-eamcet-college-predictor
Hope it will help.
All the Best.
Hello,
As both the rank mentioned by you are decent one and as you are looking for NIT hence, i would like to say you that getting NIT even on the basis of your OBC NCL category rank is not at all possible because NIT’s are top level of colleges hence the cutoffs are too high and the competition among students for getting NIT is also huge but definitely there are many more options of colleges you can go for and you can also use below given link to check the colleges you can get on the basis of your rank, so the link is:
Thank you..
Making prediction is difficult as cutoff depends upon various factors like :-
-----------) number of students/ candidates that appeared in the jee main exam,
-----------) number of available seats,
-----------) performance of different students in the examination,
-----------) the branch you want,
-----------) the category you belong etc.
-----------) your rank in jee main
In 2nd round of csab, 2020 , closing rank for nit Surathkal was :-
mechanical engineering :- 15245 rank under home state.
So,
>>>>>>>>> With 15976 rank
You have a little low to some boundary chances in nit Surathkal mechanical in csab under home state in csab
https://admissions.nic.in/csabspl/csabsplresult/result/CurrentORCR.aspx
you have chances in following which are listed below along with their closing rank in 6th round of josaa counselling 2020 under other state :-
---------) National Institute of Technology Jaipur, Mechanical Engineering :-17090
---------) National Institute of Technology Bhopal, Electrical Engineering:-18017
---------) National Institute of Technology Agartala, computer science:-18351
---------) National Institute of Technology Allahabad, Chemical Engineering (4 Years, Bachelor of Technology):-20185
And more
You can check the closing ranks at official website of josaa by going through the link given below
Or
For previous year cut offs of top colleges like NITs, IIITs , you can also refer our page at :-
NITs :- https://engineering.careers360.com/articles/nits-cutoff-for-top-btech-branches
IIITs:- https://engineering.careers360.com/articles/jee-main-cutoff-for-top-iiits
Above prediction has been made considering past year cut off data but closing rank for colleges varies every year depending upon many factors like jee main question paper difficulty, number of students writing the exam etc so
--------) PWD :- 0.0096375 percentile
Dear Student ,
In B.Tech .. beside scoring good percentage of marks , you also need to clear the basic concepts more consciously as in interview/ written tests ... the recruiters will check your basic as well as advanced knowledge in your relevant field .
Well, above 6.5 CGPA holders (or 60% aggregate ) are considerable to apply for any govt/private jobs (Except some individual companies).But , above 8 CGPA holders can get the chance early to get any placements in this relevant field (like , TATA, Larsen & Toubro etc)
Hope you understand !
You have low chance in nit Surathkal mechanical even in csab.
In 2nd round of csab, 2020 , closing rank for nit Surathkal mechanical engineering was 10648 rank.
Dear,
Mechanical Engineering is a branch of physics that combines engineering physics and mathematics principles with materials science to design, analyze, manufacture, and maintain mechanical systems. It is the branch of engineering that involves the design, production, and operation of the machinery.
The scope of mechanical engineering has no longer remained limited to just manufacturing and testing of huge machinery and equipment. With new technology advancements, there are several new domains in mechanical engineering which are being taken up by passionate mechanical engineers.
In NIT(National Institute of Technology) , the placements are excellent as compared to the colleges. The infrastructure is also well maintained, every need of students are taken care of. Around 96% of the students got placed from NIT's in our country. The highest salary package offered is 70-80 LPA, and the lowest salary package offered is 3-3.5 LPA. The average salary package offered is 7-8 LPA. NIT Kurukshetra and NIT Jamshedpur are considered to be the best in the field of Mechanical Engineering. Mechanical Engineers can explore theri careers in designing efficient motor vehicles, aircrafts, manufacturing units and industrial machinery. The mechanical engineers can also contribute in the development of complex machinery systems, engines and power equipments.
Hope this helped in solving your query.
Good Luck :)
The Question containing Inaapropriate or Abusive Words
Question lacks the basic details making it difficult to answer
Topic Tagged to the Question are not relevant to Question
Question drives traffic to external sites for promotional or commercial purposes
The Question is not relevant to User
And never miss an important update